The disposal price has been reduced! (Member discounts are not applicable) 2022/3/22 sales price 59,800 yen Compact radial horn. A JBL compression driver with a throat diameter of 2.5 cm can be installed. It is made of die-cast aluminum and coated with a special damping agent Lansa Plus on the outside to prevent resonance. The appearance may be scratched, paint peeling, etc. Serial 28552/30072 (Kimiya Miura)
Accessories: No accessories
Main specifications: Directivity (horizontal × vertical) 90 × 40 crossover frequency 800Hz W584 × H140 × D394mm 9.1kg
* It is inexpensive because there is a lot of paint peeling off. It is a horn designed for LE85 and LE175. Since the effective length of the exponential horn is longer, the connection with the woofer is smoother. Scratches and paint peeling can be seen on the exterior. Serial 9105/9122 (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Throat diameter 2.5cm Crossover frequency 800Hz or more/LE175, LE85 Horn total length 293mm (horn depth only) Dimensions W250 × H150 × D60mm Weight 2.7 kg
The price has been reduced. 2022/4/4 Sales price 49,800 yen* It is cheap because there are many scratches and one side throw travel is missing. JBL 2 inch screwdriver wooden horn Originally designed for concert halls, it is a horn that spreads sound over a wide area without difficulty. Because it is made of wood, it echoes a warm and soft tone that is different from metal (Shota Sasaki)
Accessories: none
Main specifications: Directivity 140 degrees × 60 degrees (horizontal × vertical) Crossover frequency 800 Hz W660 × H95 × D340 mm Weight 4.4 Kg
The disposal price has been reduced! (Member discounts are not applicable) 2021/12/20 selling price 49,800 yen* Throat (2328) is cheap because it is out of stock. This is a wooden horn for JBL 2 inch drivers. Originally designed for concert halls, it is a horn that spreads sound over a wide area without difficulty. Since it is made of wood, it echoes a warm and soft tone that is different from metal. The appearance may be dull and paint peeling. Serial 11535/12219 (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Directivity 140° × 60° (horizontal × vertical) Crossover frequency 800kHz W660 × H95 × D340mm 4.4Kg
JBL's exponential horn Since it is a long horn, it can be used at low crossover frequencies. Combined with an acoustic lens, it is possible to create highly directional monitor sounds. The appearance is slightly dull, and there are small scratches in some places (Yoichi Murakoshi)
Accessories: None
Main specifications: crossover frequency 800Hz sound pressure level 108dB (2308 lens used) throat diameter 2.5cm diameter 156 × D293mm weight 1kg/book
The disposal price has been reduced! (Member discounts are not applicable) 2022/3/24 sales price 89,800 yen A 2-inch throat of Raft Craft is mounted on JBL's large professional radial horn. Of course, JBL can be mounted as it is. A radial horn with a straight sound and a moderately wide sound. Please try the sound with good sound skipping, which is also used for large output outdoor use. The exterior has been repainted and there is a slight stickiness and paint peeling. Serial 11462/11474 (Tamura Eiji)
Accessories: No accessories
Main specifications: Radial horn crossover for 2 inches 500Hz Directivity: horizontal 60° × vertical 40° W613 × H203 × D508mm 9.5kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2022/1/26 selling price 59,800 yen A wooden horn that can be mounted with a JBL 2 inch driver. I don't know the details of the manufacturer, etc., but it's made like 2397. It spreads the sound over a wide range without difficulty, and echoes the warm and soft tone typical of a wooden horn. The appearance may be dull or dirty. (Eiji Tamura)
Accessories: No accessories
Main specifications: W670 × H120 × D430 mm Weight 6.1 kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/3/23 sales price 15,000 yen Unspecified bi-radial horn. It feels like an EV when I saw it. It is possible to mount JBL 2-inch screwdrivers, etc. The appearance is dull. (Eiji Tamura)
Accessories: No accessories
Main specifications: W440 × H290 × D150mm own weight 1.06 kg/book
The disposal price has been reduced! (Member discount is not applicable) 2022/3/13 Sales price 79,800 yen A wooden morning glory horn designed and manufactured with a hyperbolic curve. It reproduces the soft singing voice that cannot be obtained with a metal horn, and the plump sound of the body of a stringed instrument. The feature is that the weight is 1/5 lighter than conventional aluminum horns coated with asphalt. The appearance has small scratches and dullness (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Cutoff Frequency 200Hz Compatible Driver Goto Unit SG-505, SG-555, SG-5880 Series JBL2 inch, ALTEC 1.4 inch each driver A combined throat sold separately is required. Diameter 560mm Length H760mm (including throat part) Throat diameter 30mm 2.6kg (actual measurement)