Straight short horn for 1" driver It is a standard model that has been used in various speakers and has been used for a long time. The exterior has paint peeling and dirt on the whole. Serial 37095 40276 (Nobuyuki Takahashi)
Accessories: None
Main specifications: Directional characteristics 90° (horizontal) /45° (vertical) Throat diameter 2.5cm Crossover frequency 500Hz or more Horn total length 216mm 1.1kg/1
The price has been reduced. 2022/6/7 selling price 39,800 yen Electro voice horn for 2 inches. It is made of resin and is not as tough as metal, so you can listen to a sound with a good three-dimensional effect. It is a convenient specification that allows you to install a 2-inch JBL screwdriver. The appearance is scratched and dirty (Katsuji Hiura)
Accessories: None
Main specifications: 2 inch horn driver directional/horizontal 90° (500-20kHz) vertical 40° (1200Hz to 20kHz) mounting part outer diameter: 128mm (actual measurement) throat diameter: 50mm (actual measurement) screw Pitch (diagonal) 102 mm (actual measurement) W534 × H333 × D278 mm (actual measurement) 3.0 kg (actual measurement)
There is only one. “Beehive” is a classic horn for JBL 1 inches. You can enjoy the sound and atmosphere of old JBL by attaching JBL LE175 or LE85. There is a lot of paint peeling and rust on the exterior (Daiki Goto)
Accessories: None
Main specifications: 1 inch crossover frequency 1200Hz or more directional 60° (conical) honeycomb W145 × H145 × D173 mm 1.5kg
The disposal price has been reduced. Member discounts are not applicable. 2022/5/28 sales price 178,000 yen Gold wing with height adjustment stay 2505 included! A rare professional model number, a combination of L5090+H5039 A horn lens composed of a square exponential horn and an acoustic lens with a hyperbolic plate. Acoustic lenses that shine in gold are also familiar at Hartsfield. The unique sound from the metal multi-wing structure is blown up by. There is dullness on the whole (Yoichi Murakoshi)
Accessories: 2505
Main specifications: Recommended crossover 500Hz directivity 100° × 60° W508 × H172 × D419mm 7.7kg
Comes with a 2-inch throat from JBL A horn made to match Yamaha's JA-6670 and JA-6681. The goodness of making is Yamaha. There is a slight feeling of use (Yoichi Murakoshi)
Accessories: None
Main specifications: cut-off frequency 230Hz W712.8 × H248 × D449mm (not including throat)
※The color is different on the left and right, so it is inexpensive. Straight short horn for 1" driver It is a standard model that has been used in various speakers and has been used for a long time. Peeling paint and dirt are noticeable on the whole exterior (Ryo Mizusaki)
Accessories: none
Main specifications: Directional characteristics 90° (horizontal) /45° (vertical) Throat diameter 2.5cm Crossover frequency 500Hz or more Horn total length 216mm 1.1kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2022/3/22 sales price 59,800 yen Compact radial horn. A JBL compression driver with a throat diameter of 2.5 cm can be installed. It is made of die-cast aluminum and coated with a special damping agent Lansa Plus on the outside to prevent resonance. The appearance may be scratched, paint peeling, etc. Serial 28552/30072 (Kimiya Miura)
Accessories: No accessories
Main specifications: Directivity (horizontal × vertical) 90 × 40 crossover frequency 800Hz W584 × H140 × D394mm 9.1kg
* It is inexpensive because there is a lot of paint peeling off. It is a horn designed for LE85 and LE175. Since the effective length of the exponential horn is longer, the connection with the woofer is smoother. Scratches and paint peeling can be seen on the exterior. Serial 9105/9122 (Satoshi Yonejima)
Accessories: No accessories
Main specifications: Throat diameter 2.5cm Crossover frequency 800Hz or more/LE175, LE85 Horn total length 293mm (horn depth only) Dimensions W250 × H150 × D60mm Weight 2.7 kg