Disposal price reduction. 2024/6/14 sales price 400,000 yen Niro's super dreadnought power amplifier. It's junk because it can't be repaired. Please use it as a parts remover. The exterior has bumps, scratches, etc. There is a crack in the acrylic on the top plate. *Member prices are not applicable for junk items. Shipping costs will be estimated separately. (TAMURA Eiji)
Maintenance information: 2024.6.14 operation confirmation (the power is on, but it does not turn on from standby)
Accessories: No accessories
Main specifications: diameter 460 mm x height 538 mm weight 80 kg
Disposal price reduction. 2019/11/2 sales price 700,000 yen It seems that the power was initially turned on during the check at the time of arrival, but then it stopped turning on. The back panel is missing. On the exterior, the veneer is peeling off, and there are stains, scratches, and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2019.11.2 Operation Confirmation Unchecked
Accessories: 3 iron needles ※ back plate missing
Main specifications: W1040 x H940 x D650 mm (actual measurement) It seems to be 130 kg or more.
armless Operation has not been confirmed because the power supply is missing. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.20 Operation Confirmation Unchecked
Accessories: glass sheet (GTT-3000B) *Power supply is missing
Main specifications: W560 x H170 x D465 mm 23.15 kg (actual measurement)
The motor makes a noise when the power is turned on, but the tray does not open. The remote control responded to the main unit. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.4 Operation confirmation The motor makes a noise when the power is turned on, but the tray does not open. The remote control responded to the main unit.
Accessories: remote control, manual
Main specifications: W470 x H145 x D380 mm 13.6 kg
Disposal price reduction. 2024/6/20 sales price 60,000 yen When the tape is inserted, it is in the fast forward state at the same time as the power is turned on, and even if you press STOP, it immediately returns to fast forward. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.20 Turn on the operation confirmation tape and go to the fast forward state at the same time as the power is turned on, and even if you press STOP, it will immediately return to fast forward.
Accessories: none
Main specifications: W520 x H267 x D130 mm approx. 13 kg
The left and right capstans are rotating when the power is turned on, but it doesn't work. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.20 Operation confirmation The left and right capstans are rotating when the power is turned on, but it does not work.
Accessories: none
Main specifications: W520 x H267 x D130 mm 12.5 kg
The left and right capstans are rotating when the power is turned on, but it doesn't work. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.20 Operation confirmation The left and right capstans are rotating when the power is turned on, but it does not work.
Accessories: none
Main specifications: W520 x H267 x D130 mm 12.5 kg
The left and right capstans are rotating when the power is turned on, but it doesn't work. The exterior has dirt, scratches, and missing cassette lids, knobs, and operation buttons. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.20 Operation confirmation The left and right capstans are rotating when the power is turned on, but it does not work.
Accessories: none
Main specifications: W520 x H267 x D130 mm 12.5 kg
Professional multi-clock generator from Brainstorm. The power is on, but it looks like it wasn't locked during the check at the time of arrival. The exterior is stained and stained, the letters have disappeared, and there is a float on the front panel. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.19 Operation Confirmation Unchecked
Accessories: AC adapter
Main specifications: external input WC, AES/EBU S/PDIF 10MHz GPS (TTL signal, combined with WC terminal), ADAT FireWire Video or built-in crystal W483 x H44 x D243 mm 1.7 kg (actual measurement)
It seems that the tweeter on one side did not sound during the check at the time of arrival, probably due to poor network contact. The exterior has chipped corners, dirt, and dirt. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.6 Operation Confirmation Unchecked
Accessories: saran net
Main specifications: 3 way, 6 speakers, bass reflex system, floor type, 8 ohm, 30 cm cone type, 16 cm cone type, 10 cm cone type for medium range, 5 cm cone type x 2 for high range, 5 cm horn type x 2, W634 x H706 x D435 mm 38 kg
Disposal price reduction. 2023/3/10 sales price 50,000 yen 1 bottle only. Front load bass reflex enclosure used in A7-X etc. in the latter half of the 70s. Made of hard particle board, it has a sense of weight, and the box also makes a modest noise. The exterior has screw holes and dirt marks on the top plate. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: screw pitch 383 mm W757 x H1062 x D610 mm 54.5 kg
In the check at the time of arrival, the sound output was confirmed with the TV input, but since there is no remote control, it cannot be operated, and it seems that other input/output cannot be switched. Remote control is missing. The exterior has stains, stains, and a menthol smell. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.7 Operation Confirmation Unchecked
Accessories: power cord*remote control missing
Main specifications: W430 × H187.5 × D420mm 18.5 kg
Disposal price reduction. 202,3/3/10 sales price 50,000 yen for 1 bottle only. A front-load bass reflex enclosure used in the A7-500-8E etc. in the early 80s. Made of solid particle board with embossed coating. On the exterior, there are screw holes and stains on the top plate. *The membership price does not apply to junk items. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: screw pitch 383 mm W757 x H1060 x D610 mm 58.7 kg (actual measurement)
I was able to make a sound when it was checked at the time of arrival, but the details were unchecked. The exterior is dirty, scratched, and the edge of the woofer is collapsed. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.9 Operation Confirmation Unchecked
Accessories: saran net
Main specifications: W318 × H965 × D413 mm 34 kg
The disposal price has been reduced! 2024.6.19 sales price 30,000 yen Conductivity has been confirmed by checking at the time of arrival, but noise etc. when connecting the device has not been checked. There is no PSE mark, so please use it as a part remover. The exterior is relatively beautiful, but there are stains and stains. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.19 Operation Confirmation Unchecked
Accessories: none
Main specifications: W160 x H178 x D213 mm 9 kg
The stylus chip is left, but the sound output has not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.4 Operation Confirmation Unchecked
Accessories: needle cover
Main specifications: dead weight 4.2 g
Disposal price cuts. 2020.3.3 selling price 100,000 yen WURLIZER jukebox. Operation is not confirmed due to a missing power cable. Can not be installed due to broken backboard. Please use it as a part taker. *Junk items will be out of price for members. (Watanabe Tadashi)
Maintenance information: 2020.3.4 Not maintained ※ Because of junk goods, no warranty will be passed as status quo.
Accessories: none
Main specifications: W800 × H1265 × D675mm 100kg or more (could not be measured)
There was a sound in the check at the time of arrival, but it seems that the frequency band is unknown due to card settings. The power cord is missing. The exterior is dirty, scratched, and stained. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.19 Operation Confirmation Unchecked
Accessories: None ※Power cord missing
Main specifications: W482 x H44 x D285 mm 3.5 kg
Disposal price reduction. 2021/11/6 A quad condenser speaker with a selling price of 50,000 yen. There is no low frequency sound on both the left and right. Noise is coming out from beginning to end on both left and right. The net is torn or scattered, and there is a large damage on one side. Please think of it as taking parts. * Member prices are not applicable for junk items (Fujisawa Yukishi)
Maintenance information: * Member prices are not applicable for junk items.
Accessories: None ※ power cord is not included
Main specifications: W660 × H925 × D270mm (including 150mm bottom plate) 18.7kg
The sound output was confirmed by checking at the time of arrival, but the tweeter was distorted, and it seems that the woofer has been replaced with an unknown unit. The exterior is dirty, scratched, and the edge of the woofer is collapsed. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.9 Operation Confirmation Unchecked
Accessories: None ※Saran net is missing
Main specifications: W368 x H648 x D372 mm 14.5 kg
Disposal price cut. 2022 6/10 Sales price 17,000 yen Speaker composed of American DAYTON AUDIO units This one does not have a network and is multi-specification, so be careful please. The sound quality features have no habit, and the sound is refreshing and makes you feel delicate. As for the exterior, peeling and peeling of the makeup print is quite noticeable overall. Please use it as a parts remover. * Member prices are not applicable for junk items (Mizusaki Ryo)
Maintenance Information: 2022.6.10 Operation confirmed
Accessories: none
Main Specifications: TW: DAYTON DC28FS-8 MID: Unknown LOW: DAYTON DC300-8
W380 × H998 × D410 mm (actual measurement) weight 31.5 kg (actual measurement)
There was a sound in the check at the time of arrival, but it seems that the frequency band is unknown due to card settings. The power cord is missing. The exterior is dirty, scratched, and part of the front cover is missing. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.19 Operation Confirmation Unchecked
Accessories: None ※Power cord missing
Main specifications: W482 x H44 x D285 mm 3.5 kg
The sound output of each unit has been confirmed, but it seems that there were times when the tweeter on one side did not ring when checked at the time of arrival. Details such as distortion have not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.8 Operation confirmation The sound output of each unit has been confirmed, but it seems that the tweeter on one side did not sound during the inspection at the time of arrival.
Accessories: spikes, saran net
Main specifications: 3-way 4-speaker bass reflex unit/13 cm cone type x 2 for ultra-low range, 12.6 cm cone type for low range, 2.6 cm dome type frequency characteristics for high frequencies 36 Hz to 40000 Hz output sound pressure level 85 dB impedance 4 Ω size W162 x H995 x D211 mm approx. 16 kg/unit
Disposal price cut! 2021/4/18 selling price 25,000 circle hole diameter 178mm, 78 mm, thread pitch 193mm, 107mm, baffle thickness 25mm. Appearance has chipped corners, digs, dirt kusumi. Please use it as a part taker. *Junk items will be out of price for members. (Takimoto Yutaka)
Accessories: Saran Net
Main specifications: W600 × H850 × D475mm 44.2kg (measured)
[Junk goods (not applicable to membership discounts)] This is a set of 15 junk records. It's all about the photo record. Accessories such as liners have not been checked. Also, there may be overlapping titles. Please be aware in advance.
The power is turned on and the tray opens and closes, but the CD cannot be read. Remote control is missing. The exterior is dirty, scratched, and stained. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.19 Operation Confirmation Unchecked
Accessories: none
Main specifications: W434 x H105 x D360 mm 14 kg
This is a stereo 2-way variable channel divider. If you use 2 units, it can also be used as a 3-way. I was able to make a sound when it was checked at the time of arrival, but there seems to be a problem with the volume and poor contact. The power cord is missing. The exterior is dirty, scratched, and stained. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.19 Operation Confirmation Unchecked
Accessories: copy of manual (English) *Power cord missing
Main specifications: 100V specification 80/125/160/250/500/630 switching H44 × W482 × D280 mm 4 kg
This is a stereo 2-way variable channel divider. If you use 2 units, it can also be used as a 3-way. I was able to make a sound when it was checked at the time of arrival, but there seems to be a problem with the volume and poor contact. The power cord is missing. The exterior is dirty, scratched, and stained. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.19 Operation Confirmation Unchecked
Accessories: copy of manual (English) *Power cord missing
Main specifications: 100V specification 80/125/160/250/500/630 switching H44 × W482 × D280 mm 4 kg
The power does not turn on. I don't seem to know the frequency band because of the card settings. The power cord is missing. The exterior has dents, stains, scratches, part of the front cover, and 1 foot missing. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.19 Operation confirmation The power does not turn on.
Accessories: None ※Power cord missing
Main specifications: W482 x H44 x D285 mm 3.5 kg
[Junk items (not applicable to membership discounts)] This is a set of 5 junk records. It's all about photo records. Accessories such as liners have not been checked. Also, there are cases where titles are duplicated. Please be aware of this.