It's junk due to broken weights, poor rotation, and inability to switch. Please use it as a part remover. There are dirt and scratches on the exterior. *Member prices are not applicable for junk items (Tamura Eiji)
Maintenance information: 2025.12.2 The weight is broken and 33.45 rotations cannot be switched. 33 revolutions is a little faster.
Accessories: No accessories
Main specifications: W420 x H198 x D360 mm (including dust cover) 8.0 kg
It's junk because there is a defect in the record/CD/TAPE section. Please use it as a part remover. There are dirt and threads on the exterior. *Member prices are not applicable for junk items. (TAMURA Eiji)
Maintenance information: 2025.12.2 The power supply is on, but the turntable does not rotate. Also, the CD opens and closes, does not read properly, and TAPE does not work.
Accessories: No accessories
It seems that 45 revolutions were not stable due to checks at the time of arrival. The arm sound is OK. Other details have not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.2 Operation confirmation It seems that 45 revolutions were not stable during the inspection at the time of arrival. The arm sound is OK.
Accessories: EP adapter, dust cover
Main specifications: direct drive static balance type S shaped pipe arm W455 × H160 × D358 mm 9.0 kg
This is unchecked junk because the dedicated cartridge is out of stock. Please use it as a part remover. There is an appearance, dullness, scratches, and a feeling of use*As a junk item, membership prices are not applicable, there is no guarantee, and it is sold as is (Kobayashi Hitoshi)
Accessories: none
Main specifications: W359 x H106 x D345 mm 2.8 kg (actual measurement)
An armless player that incorporates a micro turntable MD-7 into a self-made cabinet. Since there was an abnormal noise due to rotation during the check, it is sold as junk. You can see a feeling of use on the exterior, sunburn, paint baldness, dullness, abrasions, etc. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2025.11.24 Operation confirmation (noise during rotation. (It will be handed over as is for junk items)
Accessories: none
Main specifications: W600 x H175 x D500 mm 14.5 kg (actual measurement)
The power is turned on (*the power cable is missing), but rotation is unstable (almost fits, but there is a contact defect in the adjusted VR). It's armless. The rubber mat is missing. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.18 The power will be turned on (*the power cable is out of stock). Rotation instability NG (almost fits, but there is a contact defect in the adjusted VR). armless Self-made cabinet. The rubber mat is missing.
Accessories: None (※ power cable is missing).
Main specifications: W500 x H240 x D400 mm 22.05 kg (actual measurement)
The pulley rotates, but since there is no rubber belt, it does not rotate. Other details have not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.11.23 Operation confirmation The pulley rotates, but since there is no rubber belt, it does not rotate. Other details have not been checked.
Accessories: none
Main specifications: W360 x H97 x D357 mm 2.8 kg
The power is on, but rotation is unstable (there is a gap in VR adjustment). The arm sound can be made. The rubber mat has hardened and deformed. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.22 The power will be turned on. Rotation is unstable (there is a gap in VR adjustment). The arm sound can be made. The rubber mat has hardened and deformed.
Accessories: dust cover
Main Specifications: Direct Drive Static Balance System S-shaped Pipe Arm Mounting Cartridge Range 4G to 14g (dead weight) Dimensions W480 x H185 x D410 mm Weight 10.5 kg
The power is on and rotation is OK, but there is no Lch sound. One contact pin with the shell is caved in. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.21 The power will be turned on. Rotation OK There is no Lch sound on the arm (one contact pin with the shell is depressed).
Accessories: dust cover
Main specifications: static balance type arm overhang 14mm W485 x H163 x D405 mm 10.0 kg
It turns on, but the switch is faulty and will turn off if you don't hold it down. Rotation is unstable (speed changes over time even when adjusted). The arm sound can be made. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: The power is turned on, but the switch is faulty and it will turn off if you don't hold it down. Rotation is unstable (speed changes over time even when adjusted). Arm sound OK
Accessories: dust cover
Main specifications: W485 x H160 x D405 mm 9.05 kg
There was a sound when checking. Since the rotation is slow and the weight is sagging, it is sold as junk. There are strong scratches, stains, and a feeling of use throughout. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2025.11.15 Operation confirmation (slow rotation, weight deterioration. (It will be handed over as is for junk items)
Accessories: none
Main specifications: direct drive quartz lock W481 x H169 x D398 mm 14 kg
The current operation can be confirmed, but we will sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.18 operation confirmation ok
Accessories: dust cover
Main specifications: Servo-type direct drive with natural marble top plate, 33.1/3 rotation speed, 45 rpm static balance type dynamic damping tone arm W485 x H172 x D408 mm 16.5 kg
The dust cover is missing, but everything else works fine as it is. We sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.18 dust cover missing. Other than that, check the operation OK
Accessories: none
Main specifications: static balance type arm overhang 14mm W485 x H163 x D405 mm 10.0 kg
It turns on, but it doesn't spin. The armweight fixing screw is damaged. The rubber mat is missing. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.18 The power is on, but it does not spin. The armweight fixing screw is damaged. Rubber mat missing
Accessories: dust cover
Main specifications: Direct drive 33/45 rotation compatible cartridge dead weight 2 to 16 g W470 x H155 x D378 mm 14 kg
The power turns on, but the switch is faulty and will turn off if you don't hold it down. Rotation OK. The arm sound can be made. There is a crack in the dust cover. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.18 The power is turned on, but the switch is defective and it will turn off if you don't keep pressing it down. Rotation OK. The arm sound can be made. There is a crack in the dust cover.
Accessories: dust cover
Main specifications: W485 x H160 x D405 mm 9.05 kg (actual measurement)
The power is turned on, but the switch is in a state where it is pushed in and cannot be turned off. The rotation is slow. Arm sound is OK. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.18 The power is turned on, but the switch is pushed in and cannot be turned off. The rotation is slow. Arm sound is OK.
Accessories: dust cover
Main specifications: W485 x H160 x D405 mm 9.05 kg (actual measurement)
The output cable has been replaced and the detachable ground wire is missing. Everything else works fine as it is. We sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.17 The detachable ground wire to which the output cable was replaced is missing. Other than that, it's OK to check the operation.
Accessories: dust cover
Main specifications: Servo-type direct drive with natural marble top plate, 33.1/3 rotation speed, 45 rpm static balance type dynamic damping tone arm W485 x H172 x D408 mm 16.5 kg
It works OK as it is, but we sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.17 operation confirmation ok
Accessories: dust cover
Main specifications: direct drive servo turntable 33/3, 45 rpm static balance type W485 x H165 x D400 mm weight 11.1 kg
The power is turned on, but the rotation is very slow (the movement of the axis itself is heavy). Checking the sound the arm is making is OK. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.17 Power on. The rotation is very slow (the axis movement itself is heavy). Checking the sound the arm is making is OK.
Accessories: dust cover
Main specifications: W453 x H180 x D353 mm 10 kg
The current operation can be confirmed, but we will sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.16 operation confirmation ok
Accessories: dust cover
Main specifications: Direct drive static balance type W485 x H163 x D375 mm 10 kg
The dust cover is missing, but everything else works fine as it is. We sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.16 The dust cover is missing. Other than that, check the operation
Accessories: none
Main specifications: Servo-type direct drive with natural marble top plate, 33.1/3 rotation speed, 45 rpm static balance type dynamic damping tone arm W485 x H172 x D408 mm 16.5 kg
The dust cover hinge is damaged, but everything else works fine as it is. We sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.16 operation confirmation ok
Accessories: special shell, dust cover
Main specifications: W435 x H161 x D376mm 9.5 kg
The current operation can be confirmed, but we will sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.16 operation confirmation ok
Accessories: dust cover
Main specifications: [DP-1000] direct drive solid rotor type AC torque motor 33/45 rotation with variable volume [DA-305] static balance type, total length 347 mm, execution length 244 mm, overhang 14 mm, needle pressure range 0 to 3 g, compatible cartridge weight 4 to 15 g [DK-77] W510 x H170 x D400 mm total weight 11.7 kg
The current operation can be confirmed, but we will sell junk without a guarantee. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.15 operation confirmation ok
Accessories: dust cover
Main specifications: FG detection double servo quartz coreless DC direct drive speed 33 1/3, 45 rpm, variable needle pressure range 0 to 3.0 g, mounting cartridge weight 14.5 g to 24 g (including shell) W480xH169xD436 mm 10.5 kg
The arm has been modified. The power-on motor rotated (*power cord is missing), but since there is no belt, the turntable does not rotate. The legs on the bottom of the cabinet have been remodeled, and there is melted rubber deposits. The dust cover is missing. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.15 The arm has been modified. Turn on the power (*power cord is missing). The pulley rotates. Since there is no rubber belt, the turntable does not rotate. The dust cover is missing. The legs at the bottom of the cabinet have been remodeled and there is melted rubber deposits
Accessories: pulley, arm weight parts
Main specifications: arm GRACE G-545 W500 x H194 x D378 mm 9.5 kg
It turns on, but it rotates at a high speed. Phono cable is missing. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.16 The power will be turned on. It rotates at a high speed. Phono cable is missing.
Accessories: dust cover
Main specifications: W510 x H187 x D390 mm 11 kg
The power is on, but the rotation is slow. There is no Rch sound (the terminal has been modified and disconnected). I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.16 The power will be turned on. The rotation is slow. There is no Rch sound (the terminal has been modified and disconnected).
Accessories: rubber belt, dust cover
Main specifications: belt drive semi-auto player 33/45 rotations W480 x H166 x D396 mm 9.2 kg
After starting, there is a catch on the arm, so we will sell it as junk. Please use it as a part remover. The exterior is dull, dirty, and there is a feeling of use such as yellowing on the dust cover. *Member prices are not applicable for junk items. Serial BC25649 (Jun Tamai)
Maintenance information: 2025.11.16 Unmaintained ※Since it is a junk item, it will be handed over as is without a guarantee
Accessories: none
Main specifications: W420 x H114 x D394 mm Weight 8.5 kg
The powered motor is running, but the platter is missing. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.14 The powered motor is running, but the platter is missing.
Accessories: dust cover, spindle parts, shell parts, pulley
Main specifications: dimensions W535 x H217 x D380 mm 8.45 kg (actual measurement)
The rubber mat has hardened, but everything else works fine as it is. We sell junk without warranty. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.14 The rubber mat has hardened, but the rest can be checked for operation
Accessories: dust cover
Main specifications: Direct drive type, fully automatic player, 33/45 rotation, tone arm/static balance type, with repeat function, electrodynamic servo, variable needle pressure range 0 to 3.0 g, cartridge weight 14.0 to 19.5 g (including shell), W480 x H169 x D436 mm, 9.5 kg