Since the tweeter has been removed, the high frequency does not come out properly. The sound output of the woofer has been confirmed. The left side cone paper is torn, the terminal is disconnected, and the right side cone paper is deformed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.11.3 Operation confirmation The high frequency does not come out properly because the tweeter has been removed.
Accessories: none
Main specifications: diameter 210 mm depth 80 mm weight 1.3 kg
1 bottle only There is distortion in the low range. It has been reattached to the leather edge, but it is about to come off. The exterior has soldered terminals, dirt, and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.11.3 Operation confirmation There is distortion in the low range.
Accessories: none
Main specifications: W160 x H95 x D160 mm 0.75 kg
The sound output has been confirmed. The cone paper is torn, and the terminals are soldered. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.11.3 Operation confirmation Sound output confirmed
Accessories: none
Main specifications: W305 x H170 x D305 mm 4.25 kg (actual measurement)
Sound can be made, but there is distortion due to total edge loss. There is a dent in the center cap on one side. The frame part on one side is distorted and the parts are disconnected. The exterior has stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.11.3 Operation confirmation sound can be made, but there is distortion due to total edge loss
Accessories: none
Main specifications: W162 x H85 x D162 mm 2.1 kg (actual measurement)
There is distortion in the low range. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.11.3 Operation confirmation There is distortion in the low range
Accessories: original box, screws
Main specifications: diameter 77 mm depth 36 mm 140 g
The sound can be made, but there is distortion at 1 khz. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.11.2 Operation confirmation sound can be made, but there is distortion at 1khz
Accessories: grill
Main specifications: 8cm cone type full range unit 364g
Hitachi's full range unit. There was a sound when checking. The edge part on one side is torn, the transformer on one side is missing, and the details are unknown, so it is sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2026.9.8 operation confirmed (broken edge, 1 transformer only. (It will be handed over as is for junk items)
Accessories: none
Key Specifications: W230 H165 D98mm
Sony's full range unit. I was able to make a sound, but both channels are distorted. The edge has been replaced with an external product. Please use it as a parts remover. *Member prices are not applicable for junk items (Kanai Hidetsugu)
Maintenance information: 2026.10.20 Operation confirmed (distorted on one side, replaced with external edge material, unmaintained. (It will be handed over as is for junk items)
Accessories: none
Main specifications: W195mm D112mm
1 bottle only The sound output has been confirmed. There are sub-cone wrinkles. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance Information: 2026.10.5 Operation Confirmed Sound Confirmed
Accessories: none
Main specifications: screw pitch (diagonal) 193.8 mm dimensions 209.6 x D94.5 mm
The sound can be made, but there is distortion and chattering. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.21 Operation confirmation The sound can be made, but there is distortion and vibration.
Accessories: none
Main specifications: diameter 130 mm height 45 m weight 1.26 kg
Sound can be made, but there is distortion. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.21 Operation confirmation can be made, but there is distortion
Accessories: none
Main specifications: diameter 165 mm, height 50 m, weight 700 g
Sound can be made, but there is distortion. The sub-cone paper is torn on both sides, and the terminals are soldered. The exterior has stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.21 Operation confirmation can be made, but there is distortion
Accessories: none
Main specifications: W105 x H50 x D105 mm 560 g
Sound can be made, but there is distortion on both sides. The exterior has all broken edges and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.21 Operation confirmation sound can be made, but there is distortion on both sides.
Accessories: none
Main specifications: diameter 200mm height 100mm weight 600g
Sound can be made, but there is distortion in the low range. The screws are missing on both sides, the cone paper is discolored on one side, and the center cap is dented on the other side. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.21 Operation confirmation sound can be made, but there is distortion in the low range
Accessories: none
Main specifications: impedance 8Ω playback frequency band FO~20kHz output sound pressure level 89dB input 30W mass 1.32kg
There is distortion around 1 kHz on one side. The exterior has slightly deformed edges, solder marks, and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.2 Operation confirmation Distorted around 1 kHz on one side
Accessories: none
Main specifications: W103 x H45 x mm screw pitch (diagonal) 85 mm 260 g
1 unit part of a guitar amplifier. The sound output and sweep have been checked. There are solder marks, dirt, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.2 operation confirmation sound, sweep checked
Accessories: none
Main specifications: W165 x H60 mm screw pitch (diagonal) 155 mm 500 g
The disposal price has been reduced! 2026/8/25 sales price 20,000 yen 1 bottle only. Since the low frequencies were distorted during the sweep check, they are sold as junk. Speaker terminal is missing on one side. Please use it as a part remover. There is no guarantee for junk items, and they are sold as is. In addition to the exterior, as described above, the area around the cone is white, cracks in the screw holes in the frame, and dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2026.8.23 operation confirmation (low frequency distortion)
Accessories: none
Key Specifications: 20cm full range 4Ω 12W
The coil touch distorts greatly, and since the edge has been replaced with a styrene sheet, it is sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Kanai Hidetsugu)
Maintenance information: 2026.8.8 operation confirmation confirmation, coil touch is greatly distorted, edge replaced with styrene sheet
Accessories: original box
Main specifications: W160 x H95 x D160 mm 0.75 kg
I was able to make a sound, but there is distortion. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.1 Operation confirmation I was able to make a sound, but there is distortion.
Accessories: cover
Main specifications: W210 x H80 mm 2.02 kg screw pitch (diagonal) 200 mm
Sound can be made, but the edge is torn, and there is distortion due to a dent in the center cap. Copper wires are tied together. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.23 Operation confirmation can be made, but the edge is torn and there is distortion due to a dent in the center cap
Accessories: none
Main specifications: total weight 261 g, baffle opening dimensions: 73 mm in diameter
Sound can be made, but there is distortion. There are solder marks on the terminals. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.23 Operation confirmation The sound can be made, but there is distortion.
Accessories: none
Main specifications: W110 x H50 mm baffle opening dimensions 115 mm 380 g
Sound can be made, but there is distortion. The terminal part is bent, and there is a deposit on the magnet. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.23 Operation confirmation can be made, but there is distortion
Accessories: none
Main specifications: W100 x H45 mm baffle opening dimensions 115 mm 520 g
Sound can be made, but there is distortion. There is a stain on the corn paper. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.10 Operation confirmation The sound can be made, but there is distortion.
Accessories: original box
Main specifications: W105 x H47 x D105 mm 0.6 kg (actual measurement)
Sound can be made, but there is distortion. The terminal on one side is damaged. There are wrinkles on the cone, dents on the edges, and adhering dust. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.9 Operation confirmation sound can be made, but there is distortion.
Accessories: none
Main specifications: 80mm 0.36kg (1 bottle)
I was able to make a sound. It is attached to a wooden board. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.3 Operation confirmation sound has been made.
Accessories: none
Main specifications: W350 x H46 x D146 mm screw pitch (diagonal) 120 mm 760 g
Sound can be made, but there is distortion. There are frame cracks and torn edges. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.3 Operation confirmation The sound can be made, but there is distortion.
Accessories: none
Main specifications: W72 x H200 x D165 mm 620g
Sound can be made, but there is distortion. The cone paper is torn and the center cap is dented. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.3 Operation confirmation The sound can be made, but there is distortion.
Accessories: none
Main specifications: full range 6cm
I can make a sound, but there's a gap. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.7.2 Operation confirmation I can make a sound, but there is a gap.
Accessories: none
Main specifications: W74 x H20 x D52 mm 40g
Sound can be made, but there is distortion and sound pressure difference. There is a stain on the cone paper and a tear on one side. The exterior has stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.6.13 Operation confirmation The sound can be made, but there is distortion and sound pressure difference.
Accessories: original box
Main specifications: W150 x H225 x D105 mm 0.3 kg
unit for cars. This is an Infinity CS-5 x 2 Boston 5.4 LF set. Infinity CS-5 edges on both sides have collapsed. There is a dent in the center cap on one side. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance Information: 2026.5.21 Operation Confirmation The edges on both sides of the Infinity CS-5 have collapsed. There is a dent in the center cap on one side.
Accessories: photo accessories
Main specifications: nfinity CS-5 W135 x H6.3 mm 0.8 kg screw pitch (diagonal) 108 cm
Boston 5.4 LF W132 x H6.3 mm 1.12 kg screw pitch (diagonal) 130 cm