The sound output has been confirmed. The woofer edge has deteriorated. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance Information: 2026.10.5 Operation Confirmed Sound Confirmed
Accessories: none
Main specifications: W271 x H423 x D194 mm 4.5 kg
The tweeter is distorted. There is stickiness and whitening due to paint deterioration. The exterior has stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance Information: 2026.10.4 Operation Confirmation Tweeter Distorted
Accessories: saran net
Main specifications: W154 x H245 x D258 mm 3.6 kg
Sound can be made, but there is distortion at 1 kHz on each side. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.10.4 Operation confirmation sound can be made, but it is distorted at 1 kHz on one side
Accessories: none
Main specifications: W250 x H750 x D250 mm 3.2 kg
1 bottle only It's junk because there is distortion in the sweep test. The front grille is missing. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: There is distortion in the 2025.12.22 sweep test
Accessories: none
Main specifications: W171 x H171 x D142 mm 1.4 kg (actual measurement)
There is a slight distortion in the sweep test, so it's junk. The front grille is missing. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: There is a slight distortion in the 2025.12.22 sweep test. The front grille is missing.
Accessories: none
Main specifications: W177 x H177 x D140 mm 1.35 kg (actual measurement)
The manufacturer has replaced it with an Alnico unit, but when loud bass comes in, one side is distorted, so it is sold as junk. I don't really understand it at normal volume. The original ferrite unit that comes with it does not distort. It is a speaker equipped with a 10cm full range unit in a white porcelain enclosure made from Shigaraki ware. Please use it as a parts remover. *Member prices are not applicable for junk items (Daiki Goto)
Maintenance information: 2026.10.2 (Distortion occurs when a large low frequency is input on one side. (The included ferrite unit does not distort.)
Accessories: stand
Main specifications: W255 x H275 x D350 mm, weight 6.4 kg (including actual measurements and terminals)
The sound can be made, but it is distorted at 1khz, and the woofer is shaky. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.10.1 operation confirmation sound can be made, but it is distorted at 1khz, and the woofer is shaky
Accessories: saran net
Main specifications: W410 × H161 × D167 mm 5.8 kg
There is distortion on one side. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance Information: 2026.9.30 Operation Confirmation Single Side Distortion
Accessories: none
Main specifications: W280 x H152 x D161 mm 2.45 kg
Sound can be made, but there is distortion. There are dirt marks on the exterior, cork on the top, and footprints on the bottom. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.30 Operation confirmation can be made, but the sound is distorted
Accessories: saran net
Main specifications: W332 x H120 x D178 mm 3.0 kg
I was able to make a sound, but there is distortion. It comes with a stand, but it can't be adjusted properly due to rust. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.29 Operation confirmation I was able to make a sound, but there is distortion
Accessories: stand
Main specifications: W230×H150×D150mm 3.30kg
The sound output has been confirmed. The exterior has color unevenness, chipped corners, and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.28 Operation confirmation Sound output confirmed
Accessories: saran net
Main specifications: W169 x H329 x D250 mm 4.1 kg (actual measurement)
1 bottle only The sound output has been confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.26 Operation confirmation Sound output confirmed
Accessories: none
Main specifications: W240 x H292 x D114 mm 2 kg
Saran net is out of stock. Sound can be made, but there is distortion. There are tears and tilts due to lower expansion. The parts for the super tweeter on one side are missing. The exterior has corrosion, tape marks, dirt, and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.19 Operation confirmation Sound output confirmed
Accessories: none
Main specifications: W175 x H800 x D295 mm 14.6 kg
Saran net is out of stock. Sound can be made, but there is distortion in the low range. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.19 Operation confirmation sound can be made, but there is distortion in the low range
Accessories: none
Main specifications: W153 x H272 x D247 mm 3.5 kg
SONY system component DHC-MD717 speakers only Sound can be made, but there is distortion. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.10 Operation confirmation The sound can be made, but there is distortion
Accessories: none
Main specifications: W220 x H430 x D275 mm 5.5 kg
I was able to confirm the sound output, but there is vibration in the center/rear. The exterior has dirt, scratches, chips, and dents on the grill. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.10 Operation confirmation The sound output was confirmed, but there is vibration in the center/rear
Accessories: none
Main specifications: W210 x H450 x D260 mm 6.30 kg
Sound can be made, but there is distortion. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.9.10 Operation confirmation The sound can be made, but there is distortion
Accessories: none
Main specifications: W430 x H150 x D190 mm 4.5 kg
Sound can be made, but when the volume is raised, distortion occurs in the low range of the woofer on one side. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.31 Operation confirmation You can make a sound, but when the volume is raised in the low range of the woofer on one side, you get scared
Accessories: saran net
Main specifications: W236×H1,050×D236mm 7.3 kg
There is chattering on the right woofer cone due to paper scraping and edge dents. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.31 Operation confirmation There is chattering due to paper scraping on the right side of the woofer cone and dents on the edge
Accessories: saran net
Main specifications: 470W x 131H x 165 Dmm 3.6 kg
The disposal price has been reduced! 2026/3/16 sales price 3,000 yen It's junk because the edge has collapsed. Please use it as a parts remover. The exterior is in poor condition, and there are dullness and stains over time. Member prices are not applicable for junk items (Matsumoto Tsuyoshi)
Maintenance information: 2026.3.16 Unmaintained ※Since it is a junk item, it will be delivered as is without warranty.
Accessories: saran net
Main specifications: W148 x H254 x D250 mm 3.1 kg
It is junk due to poor contact with the SP terminal and the sound is interrupted. Please use it as a part remover. There is no guarantee for junk items, and they are sold as is. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2026.8.20 operation confirmation (poor SP terminal contact, sound interrupted)
Accessories: none
Main specifications: W430 x H88 x D95 mm 1.8 kg (actual measurement)
There is distortion in the middle on one side of the sweep check. The saran net has changed color and there is a big hole. The exterior has stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.19 Operation confirmation There is distortion in the middle on one side during the sweep check
Accessories: saran net
Main specifications: W315 x H525 x D240 mm 12 kg
One side can't make a sound, and the other side can make a sound, but the top part is missing. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.18 Operation confirmation One side cannot make a sound, and the other side can make a sound, but the top is missing.
Accessories: none
Main specifications: W150 x H250 x D163 mm 1.95 kg (actual measurement)
The sound output has been confirmed, but the diaphragm has deteriorated and is cracked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.17 Operation confirmation Sound output has been confirmed, but the diaphragm has deteriorated and is cracked
Accessories: none
Main specifications: W124 × H256 × D202mm 2 kg
The woofer edge collapses and there is vibration due to corrosion. There is a dent in the center cap. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.17 Operation confirmation Woofer edge collapse and vibration due to corrosion
Accessories: saran net
Main specifications: W153 x H259 x D246 mm 3.8 kg
I can make a sound, but it makes noise.. The exterior has stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.17 Operation confirmation can be made, but there is noise
Accessories: Connection cable x 2
Main specifications: diameter 150 mm 0.8 kg (actual measurement)
The active side was input with an RCA cable, and the other side was able to produce sound with an input using a speaker cable, but simultaneous pair sound output was not confirmed. The rubber foot on one side is missing. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.15 Operation confirmation The active side was input with an RCA cable, and the other side was able to make sound with input using a speaker cable, but simultaneous pair sound output could not be confirmed
Accessories: saran net
Main specifications: W150 x H240 x D210 mm weight 1.9 kg active side 2.9 kg
There is distortion at 1 kHz on one side of the tweeter. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (Shizuka Tsuzaki)
Maintenance information: 2026.8.10 Operation confirmation There is distortion at 1 kHz on one side of the tweeter
Accessories: none
Main specifications: W260 x H1,210 x D300 mm 7 kg