There was a sound when checking. The damper has deteriorated and is bent greatly to the right, so it is sold as junk. Please use it as a parts removal. *Member prices are not applicable for junk items (Kobayashi Hitoshi)
Maintenance information: 2026.1.13 operation confirmed (cantilever bending, damper deterioration, junk will be sold)
Accessories: none
Main specifications: output voltage 3.2 mV 47 kΩ 20 Hz to 20 kHz needle pressure 1.25 g
The stylus chip is left, but the sound output has not been confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance Information: 2025.10.31 Operation Confirmation Unchecked
Accessories: none
Main specifications: dead weight 6.4 g
The right channel didn't come out at the time of check, so it's sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2026.1.25 confirmed (right channel does not appear. (It will be handed over as is for junk items)
Accessories: none
Main specifications: 6.5 g dead weight
The disposal price has been reduced! 2026/1/17 sales price 10,000 yen It's junk because the needle is broken. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items (Asaine Tomoho)
Maintenance Information: Junk 2026.1.17 Unmaintained ※Since it is a junk item, it will be delivered as is without warranty.
Accessories: none
Main specifications: Playback frequency range 20 to 30,000 Hz output voltage 0.32 mV needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 12 ohms recommended load resistance 100 ohms or more (when connected to a head amplifier) stylus joint oval needle aluminum pipe cantilever mass 7.6 g
I sell junk because the cantilever is missing. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Cantilever missing, operation unconfirmed (this is a junk item and will be handed over as is)
Accessories: none
Main specifications: 8.5 g dead weight
cantilever missing. The sound output has not been confirmed and will be sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Accessories: none
Main specifications: dead weight 7.3 g
The body seemed to be scratched due to damper deterioration at the time of inspection, so I will sell it as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2025.12.30 operation confirmation (damper deterioration. (It will be handed over as is for junk items)
Accessories: none
The stylus chip is still there, but the sound output has not been confirmed. There is a lateral deviation on the cantilever. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.10 Operation confirmation Unchecked.
Accessories: none
Main specifications: needle pressure 1.75 g, dead weight approx. 15 g
The stylus chip is still there, but the sound output has not been confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.9 Operation confirmation Unchecked.
Accessories: none
Main specifications: 5.5 g dead weight
There was a sound in the check at the time of arrival, but it seems that there was distortion. The screw hole on one side is crushed and the cartridge cannot be fixed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.8 Operation confirmation Unchecked.
Accessories: original box, case, manual
Main specifications: VM type playback frequency band 18 to 20,000 Hz output voltage 4.0 mV standard needle pressure 1.4 g dead weight 6.8 g
Original box dimensions: W105 x H50 x D105 mm 180 g (actual measurement)
Since the cantilever is twisted and bent, the sound output cannot be confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.8 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 3.3 g
The stylus chip is still there, but the sound output has not been confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.8 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 3.1 g
body only. The left channel didn't come out at the time of check, so I will sell it as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2025.12.18 confirmed (left channel does not appear. (It will be handed over as is for junk items)
Accessories: none
Main specifications: dead weight 7g
The stylus chip is still there, but the sound output has not been confirmed. There is a lateral deviation on the cantilever. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.7 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 6g
Since the cantilever is broken at the root, it has not been possible to confirm the sound. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.4 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 8.7g
It's junk because the cantilever is broken. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: The cantilever is broken (it is a junk item and will be handed over as is)
Accessories: none
The stylus chip is still there, but the sound output has not been confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.3 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 6.8 g
Since the stylus chip is missing, the sound output cannot be confirmed. There is a lateral deviation on the cantilever. The exterior has stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2026.1.2 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 3.1 g
The stylus chip is still there, but the sound output has not been confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.31 Operation confirmation Unchecked.
Accessories: none
The disposal price has been reduced!. 2025/11/16 sales price 12,000 yen There doesn't seem to be a sound on the left channel when checking when it is in stock. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance Information: 2025.11.15 Operation Confirmation Unchecked
Accessories: none
Main specifications: dead weight 7g
Since the cantilever is broken, the sound cannot be confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.28 Operation confirmation Unchecked.
Accessories: none
Main specifications: output voltage 3 mV needle pressure 1.0 to 2.0 g dead weight 3.5 g
The stylus chip is still there, but the sound output has not been confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.27 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 6.8 g
Since there is no needle, the sound cannot be confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.27 Operation confirmation Unchecked.
Accessories: none
Main specifications: 5.5 g dead weight
The stylus chip is still there, but the sound output has not been confirmed. There is a dent in the cantilever. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.27 Operation confirmation Unchecked.
Accessories: none
Since there is no needle, the sound cannot be confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.26 operation confirmation
Accessories: none
Main specifications: dead weight 5.6 g
Since the cantilever is broken at the root, it has not been possible to confirm the sound. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.26 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 6g
Since the stylus chip is missing, the sound output cannot be confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.25 Operation confirmation Unchecked.
Accessories: none
Main specifications: dead weight 6.4 g
In the check at the time of arrival, it seems that the sound was confirmed with a needle pressure of 1.5 g. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.25 Operation confirmation In the inspection at the time of arrival, it seems that the sound was confirmed with a needle pressure of 1.5 g.
Accessories: none
It seems that a sound was made during the check at the time of arrival, but there is no plastic part around the needle. The exterior has stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.24 Operation confirmation It seems that a sound was made during the inspection at the time of arrival, but there is no plastic part around the needle.
Accessories: original box
Main specifications: 10mV 20Hz-15kHz needle pressure 3 g to 7 g dead weight 5.5 g
Since there is no needle, the sound cannot be confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.12.21 Operation confirmation Unchecked.
Accessories: none