There is a slight distortion in the MID on one side during the sweep test, so it's junk. ATT has gaps and poor contact points. The woofer edge is hardened and has wrinkles. It cannot be fixed to the main body due to broken dowels on the saran net or damage to the frame. Please use it as a parts remover. There are scratches and stains on the exterior. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: There is slight distortion in the MID on one side during the 2025.12.2 sweep test. ATT has gaps and poor contact points. The woofer edge is hardened and has wrinkles. It cannot be fixed to the main body due to broken dowels on the saran net or damage to the frame.
Accessories: saran net
Main specifications: W365 x H655 x D321 mm 21 kg
There was a sound when checking. Since edge hardening, frame rust, center cap depression, saran net frayed, etc. are poor, it is sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed impedance 6 ohms, W380 x H680 x D325 mm, 21 kg
Continuity has been confirmed with a tester. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.11.28 Continuity has been confirmed with an operation confirmation tester.
Accessories: lead wire
The stylus chip is still there, but the sound output has not been confirmed. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.11.28 Operation confirmation Unchecked.
Accessories: none
The sweep test was OK, but the edges are hardened. There is a difference in sound pressure on the mid and one side is low (hard to understand when playing music). There is a dent in the grill, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.21 The sweep test was OK, but the edge is hardened. There is a difference in sound pressure on the mid and one side is low (hard to understand when playing music). There is a dent in the grill.
Accessories: saran net
Main specifications: 3 way 3 speaker sealed impedance 6 Ω playback frequency band 35 Hz-35 kHz crossover 500 Hz/4 kHz maximum input 230 W sound pressure 91 dB W380 x H680 x D325 mm 27 kg
There is a gap in ATT, so there are places where the sound is interrupted or doesn't come out. Woofer edge hardening It's junk because it seems distorted in the middle range on one side. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.10.10ATT has gaps, so there are places where the sound is interrupted or does not come out. Woofer edge hardening Distorted in the middle range on one side
Accessories: saran net
Main specifications: 4 way 4 speakers, bookshelf type impedance, 8 ohms, playback frequency band, 30 Hz to 25 kHz, W360 x H585 x D286 mm, weight 22.2 kg/unit
There are distortions in the scoker on both sides during the inspection at the time of arrival. Woofer edge hardening There is a dent in the TW grill on one side. SP terminal is damaged on one side. There is a hole in the saran net, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.2 There is distortion on both sides of the scoker. Woofer edge hardening There is a dent in the TW grill on one side. SP terminal is damaged on one side. There is a hole in the saran net.
Accessories: saran net
Main specifications: W251 x H431 x D230 mm 8.5 kg
The woofers have hardened edges. There is distortion in the MID on one side, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.23 The woofers have hardened edges. There is distortion in the MID on one side.
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type playback frequency band 35 Hz to 30 kHz impedance 6 ohms output sound pressure level 91 dB, W370 x H682 x D337 mm, 21.1 kg/book
The woofer edge is hardened. There is distortion in the TW on one side. The ATT knob on one side is missing. Saran net is junk because it's out of stock. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.23 The woofer edge is hardened. There is distortion in the TW on one side. The ATT knob on one side is missing. Saran net is out of stock.
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type playback frequency band 35 Hz to 30 kHz impedance 6 ohms output sound pressure level 91 dB, W370 x H682 x D337 mm, 21.1 kg/book
The woofer edge is hardened. The TW on one side is crushed and there is no sound, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.11.23 The woofer edge is hardened. The TW on one side is crushed and there is no sound.
Accessories: saran net
Main specifications: 2 way bass reflex impedance 8 ohms 92 dB dimensions W395 x D405 x H840 mm weight 32 kg/1
The woofer edge is hardened and has a tear. TW and MID are currently OK to make sounds. ATT is junk because it's crunchy. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance Information: 2025.11.22 The woofer edge is hardened and torn. TW and MID are currently OK to make sounds. There is a gap in ATT.
Accessories: saran net
Main specifications: W380 x H680 x D335 mm 23.45 kg
1 bottle only I was able to confirm the sound output, but the edge is hardened. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance information: 2025.11.14 Operation confirmation The sound output was confirmed, but the edge is hardened.
Accessories: none
Main specifications: W230 x H386 x D242 mm 8.0 kg/1 bottle
Operation has not been checked. It seems that the sound was confirmed during the check at the time of arrival, but the details have not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance Information: 2025.11.6 Operation Confirmation Unchecked
Accessories: saran net
Main specifications: W370 x H798 x D303 mm 15.46 kg (actual measurement)
The stylus chip is left, but since the cantilever is bent, the sound output has not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (SUZUKI Keita)
Maintenance Information: 2025.10.31 Operation Confirmation Unchecked
Accessories: none
Main specifications: needle pressure 2g
The disposal price has been reduced 2025/10/13 sales price 5,000 yen because there is distortion in the sound, so we will sell it as junk. Please use it as a part remover. The exterior has dents on the center cap and tweeter, and there is a feeling of use such as scratches, dullness, and stains on the saran net. *Member prices are not applicable for junk items. Serial 35199/35394 (Jun Tamai)
Maintenance information: 2025.10.13 Unmaintained ※Since it is a junk item, it will be delivered as is without warranty.
Accessories: saran net
Main specifications: W320 x H570 x D294 mm Weight 13.5 kg/1 bottle
The power is on, but the rotation is unstable. The stack of arm weight fixing screws is crushed and cannot be fixed. The pedestal of the IFC lifter is damaged and cracked. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.10.18 The power will be turned on. Rotational instability is not allowed. The stack of arm weight fixing screws is crushed and cannot be fixed. The pedestal of the IFC lifter is damaged and cracked.
Accessories: dust cover
Main specifications: W500 x H174 x D398 mm Weight 12.5 kg
The sound output has been confirmed, but it is junk due to poor condition such as dents on both sides of the tweeter, mold on the woofer cone, edge hardening, cabinet chipping, etc. Please use it as a parts remover. *Member prices are not applicable for junk items (Sasaki Shota)
Maintenance information: 2025.8.30 sound output confirmed
Accessories: none
Main specifications: W320 × H610 × D352 mm 19 kg
The power is on, but rotation is unstable (there is a gap in the adjustment volume). The arm sound can be made. Armrest damaged. There is damage to the dust cover. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.8.25 The power will be turned on. Rotational instability ng (there is a gap in the adjustment voll). The arm sound can be made. Armrest damaged. There is damage to the dust cover.
Accessories: dust cover
Main specifications: Direct drive system, 4 phases, 12 poles, 24 slots, brushless DC servo motor, 324mm aluminum alloy die-cast turntable, static balance type, universal S-shaped pipe arm W478 x H149 x D383 mm 9 kg
The motor turned on, but since there is no belt, the turntable does not rotate. Armrest damaged. I will sell it as junk without checking anything else. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2025.8.9 The power will be turned on. The pulley rotates. Since there is no rubber belt, the turntable does not rotate
Accessories: dust cover
Main specifications: W440 x H141 x D395 mm 7.6 kg (actual measurement)
The sweep test was OK during the check at the time of arrival, but it's junk because the ATT came off due to cracks, hardened woofer edges, and damage to the dowels, frame damage, and bending of the saran net. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2018.12.17 sweep OK, ATT has glue, woofer edge hardening, and the saran net frame comes off due to damage/curvature, and there is dowel damage
Accessories: saran net
Main specifications: W365 × H655 × D321 mm 21 kg
The sweep test was OK in the check when it arrived, but it's junk because the TW grill has slight dents, hardened edges, and cracks in the ATT. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2018.2.28 sweep ok, slight dent in TW grill, edge hardening, ATT grit
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 6 ohm playback frequency band 30 Hz to 30 kHz level control/4 mid-range positions (600 Hz to 5 kHz), high range 4 positions (5 kHz to 30 kHz), W370 x H680 x D380 mm 24 kg
The TW sound on one side did not come out when checked at the time of arrival, and the woofer edge is hardened, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2021.7.6 There is no TW sound on one side, and the woofer edge is hardened.
Accessories: saran net
Main specifications: W365 × H655 × D331 mm 21 kg
There are distortions in the MID and TW on one side due to inspection at the time of arrival. There is no sound other than HIGH due to poor ATT contact, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2021.4.14 There is MID and TW distortion on one side. There is no sound other than HIGH due to poor ATT contact
Accessories: saran net
Main specifications: 3 way, 3 speakers, impedance, 8 ohms, playback frequency band, 40 Hz to 25 kHz, allowable input, 40 W, W315 x H525 x D215 mm, 10 kg
TW distortion on one side, MID distortion on the other side, and rattling on the ATT knob due to checks at the time of arrival, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance information: 2019.2.4 TW distortion on one side, MID distortion on the other side, rattling on the ATT knob
Accessories: saran net
Main specifications: W390 x H665 x D280 mm 23 kg
Sweep is OK when checked at the time of arrival, but it's junk because the ATT is broken and there are wrinkles on the woofer center cap on one side. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance Information: 2018.11.27 Sweep OK, ATT Gari, Wrinkles on one side woofer center cap
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type playback frequency band 35 Hz to 30 kHz impedance 6 ohms output sound pressure level 91 dB, W370 x H682 x D337 mm, 21.1 kg/book
The edge was hardened during the inspection at the time of arrival, and there is an abnormal noise coming from the woofer on one side. The SP terminal has been modified, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items. (TERAMOTO Yoshihiko)
Maintenance Information: 2021.6.12 Unusual noise due to one-sided woofer sweep with slightly stiff edge. It sounds like it's rattling. The SP terminal has been remodeled and is compatible with bananas.
Accessories: saran net
Main specifications: 2 way 2 speakers, sealed system, anti-magnetic design, W230 x H401 x D242 mm, 10.0 kg/unit