Tube MM/MC phono equalizer equipped with 2 types of high quality MC transformers. It is a model full of originality, with a high sense of density and rich sound quality, and a design with a large volume on the front panel. In addition to spot rust and line marks on the exterior and top surface, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.9.9 operation confirmed
Accessories: none
Main specifications: balanced input type MC boost transformer, input part, amplification part, power supply unit, vacuum tube ECC83, ECC88 MM/MC (LOW/ HIGH), W410 x H110 x D285 mm, 7 kg
The price has been drastically reduced. 2024/9/7 sales price 148,000 yen Maintained! An amplifier with a sharp treble that makes it easy to understand the shadows of the sound. It uses a quadruple volume with little sound loss even at low volumes, has excellent phono performance, and can also be used as an equalizer amplifier. The piano sound source that the company excels at is worth listening to. There are corrosion marks on the top plate, bumps and paint peeling on the corners (Kojima Yosuke)
Maintenance information: 2024.9.6 maintained (all switch disassembly contacts polishing cleaning contacts grease coating volume disassembly reviver cleaning contact cleaning pattern cleaning each circuit inspection, capacitor inspection, each input/output operation checked)
Accessories: copy of instruction manual
Main specifications: PHONO2 system (MC compatible) line system 3 system tape system 2 system frequency characteristics MC, mm/20 Hz to 20 kHz AUX, etc. /10 Hz to 100 kHz W435 x H74 x D353 mm 8 kg
The price has been reduced! 2024/9/5 sales price 148,000 yen Manufacturer maintained! The L-550X is the successor to the L-550, a masterpiece premain amplifier with pure Class A operation. Compared to the initial model, there are no changes other than the addition of an input terminal, and it plays back bright and spacious lacktones. MC compatible, which is great for analog users. The exterior is dull and there are chips and scratches on the cabinet top and sides. Serial B4401324 (Takahashi Nobuyuki)
Maintenance information: 2024.9.5 Luxman headquarters maintained (Rch power transistor replacement Lch power transistor replacement resistor, driver transistor, capacitor, fuse replacement power amplifier base solder correction pilot lamp replacement
Input selector SW contact cleaning inspection running test comprehensive adjustment operation characteristic test)
Accessories: copy of instruction manual
Main specifications: 50W+50W (8Ω) pre-main separation function W453 x H174 x D470 mm 20 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/8/3 sales price 248,000 yen ※Hinges are out of stock. Maintained in 2018.11! With the density and suppleness of the sound typical of THORENS, you can enjoy an analog feel not found in recent players. Equipped with the SME 3009R, it further fully demonstrates the individuality of the cartridge, and is compatible with a wide range of cartridges, from lightweight types to SPU and other heavyweight cartridges. *There is a slight vibration in the arm during startup, but this is a specification. Externally, there are scuffs and cracks on the dust cover. Serial 22733 (Yonejima Satoshi)
Maintenance information: 2018.11.23 Maintained (Rubber was installed for the dump truck to slightly shorten the vibration period. Arm operation, voice check, end lift up check) 2018.8.22 maintained (AC adapter transformer attached with hot bond. Case putty repair for the root part of the adapter cord. SME main subweight O-ring replacement. Rework the board solder. Semi-fixed VR for rotation adjustment, shaft oil change. rotation adjustment. (Housing cleaning such as platter polishing, auto lift adjustment, operation check, sound confirmation)
Accessories: AC adapter
Main specifications: [TD-320MK3] belt drive type floating cabinet size W440 x H170 x D350 mm [3009R] static balance type short type 9 inch needle pressure 0 to 5 g compatible cartridge weight 9.5 to 22 g
Maintained! The diamond called Yamaha FET shows off its excellent purity and transparency. With this brush-up, the sharpness of the stand up and the high level of transparency have been completely revived, and you can enjoy natural Yamaha sound without getting tired of listening. The exterior has spots, scratches, etc. due to age. Serial 05823 (Fujisawa Yukishi)
Maintenance information: 2024.9.6 Maintained (29 electrolytic capacitors replaced. Replace the protection relay. Volume and switch disassembly contact polishing cleaning. Level meter misalignment adjustment. Idling current, offset voltage adjustment. I/O operation check)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) SNR 115dB W436 x H151 x D370 mm 26 kg
The price has been reduced! 2024/5/20 sales price 8,000 yen RCA cable 0.7 m pair A cable with bright and light tone, high resolution, and excellent spatial expression. There is a feeling of wear on the exterior (Tamai Jun)
Maintenance information: 2024.8.31 continuity confirmed
Accessories: none
The 3P power inlet plug uses a high-tech alloy boasting 2.5 times the conductivity of PSE standard phosphor bronze as the material. High quality power plug compatible with broadcasting stations and recording studios (Hiura Katsuji)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: original instruction manual box
Main specifications: 3P power inlet plug conductor material, domestic copper alloy (1.5 times the conductivity of phosphor bronze), body material, impact resistant polycarbonate, 86 x 29 x 22 mm
The 3P power inlet plug uses a high-tech alloy boasting 2.5 times the conductivity of PSE standard phosphor bronze as the material. High quality power plug compatible with broadcasting stations and recording studios (Hiura Katsuji)
Maintenance information: 2024.9.6 continuity confirmed
Accessories: none
Main specifications: 3P power inlet plug conductor material, domestic copper alloy (1.5 times the conductivity of phosphor bronze), body material, impact resistant polycarbonate, 86 x 29 x 22 mm
Hubbell AC plug. PSE certified product. The L-shaped type does not put stress on the cable by plugging it in (Murakoshi Yoichi)
Maintenance information: 2024.9.6 continuity confirmed
Accessories: none
ST link cable 1.0 m high purity pure quartz fiber with ultra-precise polishing finish (grain size 20000). ST link cables are now valuable. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.20 continuity confirmed
Accessories: No accessories
Unspecified granite board. It is polished on 5 sides. Use it for amplifiers, CD players, medium speakers, etc. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: none
Main specifications: W453 x H20 x D453 mm 9.4 kg (all actual measurements)
The disposal price has been reduced! (Member discounts are not applicable) 2024/8/26 sales price 448,000 yen Levinson's long-selling pre-main amplifier. A dual monaural configuration that is thoroughly packed into a single chassis while keeping the design concept of separation intact. You can be satisfied with all music genres with quality that easily surpasses separate amplifiers. The exterior condition has some dull stains over time. ※There is a small scratch on the upper front. Serial 1347 (Yamato Yuki)
Maintenance information: 2024.8.26 operation confirmed 9
Accessories: remote control instruction manual power cable
Main specifications: 100W+100W (8Ω) XLR input x 2 system RCA input x 3 system gain adjustable (preamp section 0/6/12 dB) W445 x H162 x D483 mm 29.5 kg
ADK 4 tier rack. It contains 2 shelves with a thickness of 26 mm, and it is also possible to adjust the shelves up and down. It is a standard rack with a full body made of solid natural wood and excellent for interior decoration. The exterior has threads, bumps, etc. ※The trolley is not included (Satoshi Yonejima)
Accessories: No accessories
Main specifications: W660 x D560 x H702 mm 30 kg shelf board weight resistance 100 kg 260 mm/140 mm/170 mm from the bottom
The disposal price has been reduced! Member prices are not applicable. 2024/8/28 sales price 498,000 yen Both inside and outside have been maintained! This is a rare Denon monitor speaker that uses a Gauss coaxial 38cm speaker unit. The dynamic sound combined with the thick low frequencies characteristic of GAUSS and high efficiency is attractive. The excellent phase characteristics unique to coaxial cannot be overlooked. The finish was beautiful with exterior maintenance. There is a slight slack around the TW on one side. (YONEJIMA Satoshi)
Maintenance information: 2024.8.28 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net is being replaced. Unit maintenance: high frequency side magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning. Network maintenance: frequency characteristic check, ATT cleaning, unit detachment)
Accessories: saran net
Main specifications: impedance 8 ohms output sound pressure level 95 dB frequency characteristics 30 Hz to 20 kHz crossover frequency 2.5 kHz maximum input 200 W W590 x 960 x D454 mm 66 kg
※There is no problem with operation, but it is currently sold because it is cheap. Pioneer bookshelf. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.9.8 operation confirmed
Accessories: none
Main specifications: W190 x H320 x D285 mm
This is Rotel's highest-grade power amplifier. It is a power amplifier that has a powerful, exhilarating sound, and can drive large speakers with plenty of room. The range is wide, clear, and delicate enough, so you can use it regardless of genre. There are paint peeling and scuff marks on the exterior. Serial 030-3281058 (Yonejima Satoshi)
Maintenance information: 2024.9.8 operation confirmed
Accessories: instruction manual, power cord
Main specifications: balance terminal (XLR), unbalance terminal (RCA), 1 each rated output 380W+380W, W440 x H240 x D398 mm, 38 kg
DENON MC CARTRIDGE With a double cantilever and a metal body that can be fixed with 4 screws, you can enjoy well-balanced, deep sound. There are no needle bends. Serial 6772 (Yonejima Satoshi)
Maintenance information: 2024.9.8 operation confirmed
Accessories: needle cover, instruction manual
Main specifications: Appropriate needle pressure 1.2 to 1.6 g impedance 40 ohms dead weight 6.0 g
The disposal price has been reduced! Member prices are not applicable. 2024/8/22 sales price 89,800 yen Solano 280 Series center speaker. Equipped with the familiar JET tweeter, they are of high quality, and are highly compatible not only with the Solano series, but also with conventional ELAC speakers. As for the exterior, there is a line scratch on the bottom. Serial 32520E0000522 (Yonejima Satoshi)
Maintenance information: 2024.8.22 sweep check is good
Accessories: original box, manual
Main specifications: 2.5-way bass reflex efficiency 87.5 dB impedance 4 ohms frequency characteristics 34 to 50,000 Hz crossover frequency 450 to 2,400 Hz W500 x H190 x D 248 mm weight 12.0 kg
The price has been drastically reduced. 2024/8/7 sales price 59,800 yen Maintained! YAMAHA 7-channel vari-controlled FM tuner. It was a luxury model at the time, and is thin yet has an atmospheric structure. This is an impressive car with a fearless design with a black face. You can enjoy clear sound quality typical of Yamaha. Overall, there are dullness and small scratches appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.8.7 maintained (band readjustment with IF, adjustment of high frequency circuit section including front end, intermediate frequency section, MPX section,
The capacitor in the digital readout board is leaking, so we will replace it. (Readout offset and 75kHz digital shift up adjustment)
Accessories: none
Main specifications: FM dedicated tuner frequency characteristics 30Hz to 15kHz W435 x H70 x D349 mm 7.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/7/20 sales price 148,000 yen Maintenance completed! A famous instrument and first generation preamp. The coat is different from today's tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. There are small scratches and dullness on the exterior ※ If you turn TREBLE to the left in the TONE ON state after 1 hour or more after the power is turned on, switching noise will appear only at the last click (Oikawa Tetsuji)
Maintenance information: 2024.7.20 Maintained (43 transistors and 50 capacitors replaced. Switch and volume cleaning. I want to disassemble and polish, but since there are only switches that seem to break, I remove them as much as possible to clean them. The film capacitors, electrolytic capacitors, and transistors in each board were replaced due to deterioration. Power cord installation. (*Please note that if you turn TREBLE to the left in the TONE ON state after 1 hour or more has passed since the power is turned on, switching noise will appear only for the last one click; various treatments have been made to this part, but this part has not been fixed)
Accessories: power cable, instruction manual
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
※This is currently a sold item. JBL 2 inch to 1 inch conversion slot. This is an essential item when attaching a 2.5 cm throat diameter screwdriver to a horn with a 5 cm throat diameter. There are dullness and scratches (Daiki Goto)
Accessories: none
Output transformer sold 1 piece, output 10W, primary: 2.5k-4k-7k-10kΩ, secondary: 500-15-8-2Ω vacuum tube used: 2A3, 6B4, 6L6, 7189A, etc. W60 x H60 x D59 mm 0.54 kg (actual measurement, not including protrusions) There are scratches and paint peeling in places (Kojima Yosuke)
Accessories: none
Maintained! A long-selling player that Technics is proud of. It boasts a simple design that is easy to use, stable operation, and durability. Clear contours, high earthquake resistance, highly accurate tone arms, etc., all of these are attractive cars with a degree of perfection that exceeds the price. On the exterior, you can see a feeling of use such as dullness and sticking marks on the main body, and line damage on the dust cover (Tamai Jun)
Maintenance information: Maintained (solder correction stator, slider cleaning/rework correction brake timing adjustment headshell contact cleaning/cleaning/correction operation confirmation)
Accessories: dust cover, subweight, manual copy, EP adapter
Main specifications: Quartz control direct drive system speed 33.45 rotation speed fine adjustment range ± 8% (continuously variable) W453 x H162 x D360 mm approx. 12.5 kg
RCA cable RCA cable using 3.3 m pair high impedance 1-core shielded cable 9395. It has a sound that is clear and has a sense of fulfillment in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.9.6 continuity confirmed
Accessories: none
Speaker cable, 2.6 m, untreated, and has excellent handling with a sheath with excellent elasticity, flexibility, and weather resistance. Although it is not flashy, it has a firm texture in the mid-range. There is friction on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.9.5 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/3/2 sales price 99,800 yen Maintained! professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.2 maintained (internal dismantling all check, Tr, C, R check, ±B INPUT bypass C replacement, Tr, R, etc., all OK, INPUT photocoupler check, operation check)
Accessories: copy of instruction manual, power cord, dedicated SP cord (cable length 2.5 m)
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
A popular SME classic headshell with a stylish design. Not only is it stylish, but it's also a valuable shell that is lightweight and strong, which is essential for light needle pressure arms and heavy cartridges. The original box is discolored and scratched (Ryo Mizusaki)
Maintenance information: 2024.9.2 continuity confirmed
Accessories: original box
Main specifications: aluminum stamping dead weight 8g
This is a broadband VM vibration cartridge with a gold-evaporated Boronmuk tapered cantilever and an ML (microlinear) stylus. You can enjoy various genres of music without getting tired of listening to the delicate and beautiful sound. The dullness of the body is slightly noticeable. (FUJISAWA KOSHI)
Maintenance information: 2024.9.2 operation confirmed
Accessories: No accessories
Main specifications: VM type playback frequency range 10 to 23,000 Hz impedance 2.1 kΩ needle pressure 0.75 to 1.75 g (1.25 g standard) dead weight 8.3 g
The disposal price has been reduced! 2024/8/30 sales price 128,000 yen*The front manufacturer's logo lamp is half cut, but it cannot be replaced because the LED display and remote control light receiving part are integrated parts. It will be handed over as is. Also, the numeric keypad on the remote control doesn't work. The play, stop, fast forward, and rewind buttons work. The unique slide-loading tray is impressive. Unlike the slim, inorganic design, it reproduces a surprisingly thick and tense sound. There is a line scratch on the top plate (Sasaki Shota)
Maintenance information: 2024.8.30 inspected (internal dismantling check, lamp section check. CD reading check)
Accessories: power cable, stabilizer, remote control
Main specifications: CD player, slide loading system, 100V specification, W430 x H68 x D302 mm
The price has been drastically reduced. 2024/5/20 sales price 12,000 yen crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
*The POWER switch and INPUT switcher SW have been replaced. Compact D/A converter. If you want to play at a lower price, please try it out. (TAMURA Eiji)
Maintenance information: 2024.8.29 Operation confirmed
Accessories: AC adapter
Main specifications: digital input: coaxial, optical W140 x H30 x D76 mm dead weight 201g
The price has been reduced. 2024/8/18 sales price 3,200 yen. ※The finger hook is off. Classic GRACE shell. The strong and lightweight construction with aluminum press processing is attractive. It is a product that brings out the characteristics of cartridges. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.8.17 continuity confirmed
Accessories: none
Main specifications: aluminum press processing dead weight approx. 11g
The disposal price has been reduced! (Member discounts are not applicable) 2024/7/30 sales price 128,000 yen Maintenance completed product! Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior is generally beautiful, but if you look closely, there is an inconspicuous small scratch on the top of the front panel. Serial KB60056 (Yamato Yuki)
Maintenance information: 2024.7.30 Maintained (main VOL replacement (original not available) front panel board battery repair, cleaning, pattern correction, POWER lamp replacement (original unobtainable, slightly brighter) power supply capacitor replacement operation check)
Accessories: power cable
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
The price has been drastically reduced. 2024/8/8 sales price 238,000 yen Maintained in 2023. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and 7 source input selectors, is also attractive (Murakoshi Yoichi)
Maintenance information: 2023.11.18 Maintained (each SW, VOL cleaning, lamp deterioration replacement, push button dismantling and cleaning, pin jack cleaning, connector re-soldering, panel peeling correction, operation check of each part)
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
The price has been reduced. 2024/5/11 sales price 39,800 yen ADK 4-tier rack. Of course, other rack units can be stacked and used. Depending on the size of the device, you can change the rack to your liking. There is a feeling of use due to appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: 4 hole caps
Main specifications: upper stage and middle height 170 mm, lower stage height 250 mm W574 x H730 x D497 mm
It is a headshell that combines magnesium alloy with anti-vibration material. The overhang and left/right tilt can be adjusted. Lead wire is out of stock (Oikawa Tetsuji)
Accessories: none
Main specifications: magnesium alloy Q dump dead weight 10.2 g
This is a 20cm full range unit ideal for backroad horns. The reasonable range and natural tone from the 80s are attractive. There is a stain on the corn paper. The net is covered (Sasaki Shota)
Maintenance information: 2024.8.25 sweep test good
Accessories: none
Main Specifications: Double Cone 20cm Full Range Unit Input 25W/Max 80W FO to 20,000 Hz 16Ω 96.5 dB 3.7 kg
The price has been reduced. 2024/8/6 sales price 18,000 yen Crossover board crossover frequency 1000 Hz for F-5/F-15. The damping slope can be changed with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: original box
Main specifications: Crossover 1000 Hz compatible models F-5, F-15, F-15L
The price has been reduced. 2024/8/6 sales price 20,000 yen frequency board for Accuphase channel divider F-5/F-15. The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching