MC type cartridge using a PCOCC6N coil. The low frequencies are tight, bright, and light, and have good momentum, making it suitable for popular systems in general. It is also recommended for those who listen to jazz, rock, etc. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2026.3.2 sound output confirmed
Accessories: needle cover, instruction, mounting screws
Main specifications: MC type output voltage 0.35 mV optimal needle pressure 1.5 g oval needle playback frequency band 15 to 50,000 Hz dead weight 5g
The disposal price has been reduced! (Member prices are not applicable) 2026/2/21 sales price 278,000 yen Maintained! Vacuum unit is not included. It is a well-balanced combination with the FR-64S high-precision tonearm. The signal engraved on the record is directly absorbed, and a sharp, focused sound is heard. It is an excellent product that embodies the high accuracy unique to Japanese products. The exterior is dull and has small scratches. Serial 04100219 (Yonejima Satoshi)
Maintenance Information: 2026.2.21 Maintained (Electrolytic Capacitor Replacement. Pitch volume center adjustment The arm needle pressure is not adjusted, and grease sticks, so it can be disassembled and cleaned. Since there is no elevation seat, it was created and installed. Remove and clean the operation panel. pitch volume, switch contact cleaning. Lubricate and clean all parts. (Arm operation, voice check, rotation check)
Accessories: No accessories
Main specifications: belt drive system, 33/45 rotation turntable with suction mechanism, main body W530 x H200 x D420 mm, body weight 17.45 kg (FR-64S), dynamic balance type, short type, needle pressure 0 to 5 g, compatible cartridge 17 g to 44 g
The 1.5m 5SQ x 3-core OFC conductor plug is rhodium plated. The price is also reasonable, so it's perfect as an introduction to upgrading the sound from a genuine power cable. The handling is also excellent. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2026.2.28 continuity confirmed
Accessories: none
Digital RCA cable, 1.0 m, RCA-RCA terminal specification, is said to be probably the strongest coaxial digital cable for audio and video at 84% speed of light, and it is famous for being excellent for ultra-long distances, and it is famous for having stable transmission skills even when constructing 300 meters or more inside a building. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.2.26 continuity confirmed
Accessories: none
Pair tube 801/801A compatible ball, brown base, square getter, measured value 76/74 (rejected value 38) with white box, there is a slight getter burn ※The pair is determined based on the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
This is a professional LAN cable with a 5.0 m CAT8 (maximum 40 Gbps/2,000 MHz) 8-core straight connection and double shielded cable to core wire (twisted pair cable). You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
The 5.5 m pair end of the speaker cable has an unprocessed high-conductivity tinned copper 2-core twisted-pair structure with a flat, low-tinted sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.2 continuity confirmed
Accessories: none
*A mobile USB charger or mobile battery is required as a power source. Equipped with 6 different equalizer curves, it easily reproduces the original sound of old analog discs and brings out the freshness of analog in a straight line. It is one that has an excellent sense of SN and fully demonstrates the power of MC cartridges. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2026.3.2 sound output confirmed
Accessories: USB cable, copy of the instruction manual
Main specifications: MC (100Ω) MM (47kΩ) 130 x 45 x 180 mm weight 480 g
RCA cable 0.5 m pair REAN (Neutrik) terminals This is a standard BELDEN line cable that has a firm thickness in the mid to low range while clearly outlining the sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.2 continuity confirmed
Accessories: none
This is a SONY condenser microphone that uses a new high-quality capsule unit. It is ideal for collecting high-quality sound from musical instruments, speeches, etc. There are no noticeable scratches on the exterior (Wang Zhan)
Maintenance information: 2026.3.5 operation confirmed (sound output check OK)
Accessories: instruction manual, cable, original box
Main specifications: Electret condenser type frequency characteristics 20 to 20,000 Hz approx. 0.8 kg (incl. accessories)
Classic GRACE shell. The strong and lightweight construction with aluminum press processing is attractive. It is a product that brings out the characteristics of cartridges. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.1 continuity confirmed
Accessories: none
Main specifications: aluminum press processing dead weight approx. 11g
Digital RCA cable, 1.0 m, RCA-RCA terminal specification, is said to be probably the strongest coaxial digital cable for audio and video at 84% speed of light, and it is famous for being excellent for ultra-long distances, and it is famous for having stable transmission skills even when constructing 300 meters or more inside a building. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.1 continuity confirmed
Accessories: none
The price has been drastically reduced. 2026/2/26 sales price 108,000 yen balance to Fisher conversion cable 1.0m Glen optimized 4N silver wire+polymer coating It is thicker in the mid to low range than the recent GOLD ECLIPSE series The printing on the sheath part disappears a lot (Kojima Yosuke)
Maintenance information: 2026.2.26 sound output confirmed
Accessories: none
※It is cheap because the yellowing is severe and the condition is poor. Unspecified head shell. It is simple and seems to be made of resin. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.1.14 continuity confirmed
Accessories: none
Main specifications: dead weight 8 g (actual measurement)
From the condenser to the socket volume, 56 deteriorated parts have been replaced, the switch volume has been completely dismantled, the contacts have been repolished, etc., and it has been completely overhauled! *The output tube has been replaced from 8045G to KT88. Furthermore, the speaker terminals have been replaced to improve convenience. It makes an overwhelming sound even when compared to the company's A series and MQ series (Daiki Goto)
Maintenance information: 2026.1.23 maintained (vacuum tube (6240G), vacuum tube socket ✕ 12, capacitor ✕ 18, resistor ✕ 2, RCA terminal, semi-fixed VR, spark killer ✕ 4, SP terminal, diode ✕ 16, micro SW ✕ 4, fuse, power cord replacement. The board was re-soldered, and the input gain VR disassembled and cleaned. Load test (at 1kHz, 8Ω load: 60W for both). Check input/output waveforms and perform sound output checks. SW/VOL disassembly contacts are re-polished and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (1 kHz sine wave, 8 ohm load: 60W+60W, OK), sound output test.)
Accessories: manual
Main specifications: Vacuum tubes used, KT88, 2 12AU7, 1 6240G, 2 12AX7, 1 W370 x H170 x D240 mm, 16 kg
Undetailed, headshell similar to the exterior of the Technics SH-98D. It also seems to be easy to use. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.1.14 continuity confirmed
Accessories: none
Main specifications: dead weight 7 g (actual measurement)
Maintenance completed, including replacement of 18 diodes, 6 lamps, and 2 relays! Sansui's separate power amplifier with excellent low frequency volume and driving power. It is a masterpiece created by putting in the highest quantity of materials at the time. It has a dynamic low range that cannot be heard with modern amplifiers, and it can drive JBL's 4343 class speakers and small, low efficiency speakers with plenty of time. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.2.28 maintenance completed (bar graph meter polarizer replacement, meter lamp replacement, speaker relay replacement, drive board fixed current diode, zener diode, diode replacement, input changeover switch, LEVEL switch disassembly contact polishing)
Accessories: instruction manual (copy)
Main specifications: digital meter with balanced input effective output 300W+300W (8Ω) 880W+880W (2Ω) W474 x H215 x D498 mm 36 kg
If you are looking for a USB 2.0 cable 0.6 m TYPE A TYPE B specification, please take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.2.26 continuity confirmed
Accessories: none
The balance cable 1.0 m pair cable uses Belden's 8423. 3-core construction The sound quality is flat and natural. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.2 continuity confirmed
Accessories: none
The balance cable 1.5m pair cable uses Belden 8423. 3-core construction The sound quality is flat and natural. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.2 continuity confirmed
Accessories: none
The balance cable 1.5m pair cable uses Belden 8423. 3-core construction The sound quality is flat and natural. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.2 continuity confirmed
Accessories: none
The price has been drastically reduced! 2026/2/24 sales price 298,000 yen A power amplifier that inherits the direct lineage of the first P-300 when Accuphase was founded. It is easily compatible with low load impedances, and the deep, roomy playback sound is attractive. By connecting to a bridge, the driving power of the advanced P-7000 class can be reproduced. As for the exterior, there is a feeling of use such as small scratches and dullness on the top of the front panel (Takahashi Nobuyuki)
Maintenance information: 2026.2.24 Operation confirmed
Accessories: Power cable, copy of instruction manual
Main specifications: 75W+75W (8Ω) 300W (8Ω) single channel 3 para push-pull current feedback amplifier circuit W465 × H180 × D425 mm 24.0 kg when connected to a bridge
The balance cable 1.0 m pair cable uses Belden's 8423. 3-core construction The sound quality is flat and natural. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.2 continuity confirmed
Accessories: none
1 bottle only Speaker cable is a standard BELDEN speaker cable nicknamed the 5.0 m end of the untreated sea snake. This cable is thick and has a sense of extrusion in the mid-range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.3.1 continuity confirmed
Accessories: none
Unspecified head shell. It is simple and seems to be made of resin. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.1.14 continuity confirmed
Accessories: none
Main specifications: dead weight 8 g (actual measurement)
Pair tube 6SN7 high reliability tube, black plate, red base measurement value 92/92 (rejection value 50) with white box, printing is often erased on both tubes ※The measured values are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Unspecified head shell. It is simple and seems to be made of resin. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2026.1.14 continuity confirmed
Accessories: none
Main specifications: dead weight 8 g (actual measurement)