Speaker box made by Western Sound Ink. It is built just like the ALTEC 614. Magnavox's 38cm field woofer C513-1E was included. There are handles on the left and right. There are scratches and dullness overall (Sasaki Shota)
Accessories: none
Main specifications: aperture diameter 344 mm, thread pitch 375 mm, W475 x H630 x D360 mm
Unspecified 2-way enclosure. The D130+075+N7000 was originally mounted. The box itself is pretty solid. There are chips, scratches, and line damage on the exterior (Mizusaki Ryo)
Accessories: none
Main specifications: W620 x H790 x D450 mm weight 32.5 kg (actual measurement)
The price has been reduced. 2025/11/6 sales price 15,000 yen. Self-made enclosure, bass reflex type, unused item, no speaker terminals attached, details unknown, but it is well-built. If you're looking for this size, take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: Speaker terminals (pair)
Main specifications: Unit hole diameter 14.5 cm W278 x H510 x D302 mm 6.8 kg (actual measurement)
The price has been reduced! 2025/10/7 sales price 5,000 yen 8cm bass reflex enclosure. You can easily enjoy making a speaker by combining it with a 12cm full range unit of your choice. There are small scratches, chips, and breaks in the saran net frame. *Speaker terminals are not included. (FUJISAWA KOSHI)
Accessories: saran net
Main specifications: plate thickness 1.5 cm opening diameter 7 cm W165 x H260 x D195 mm 2.3 kg
The details of the self-made enclosure bass reflex type are unknown, but it is well-built. If you're looking for this size, take this opportunity. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: Unit hole diameter 15 cm (4 screw holes/17.5 cm diagonal) W300 x H540 x D297 mm 8.8 kg (actual measurement)
Unspecified 8cm bass reflex enclosure. It is a small, well-built box. There are no screw holes. Comes with a terminal compatible with banana plugs. Both the front and rear are attached and cannot be removed. If you are a self-writer, please (Sasaki Shota)
Main specifications: bass reflex type aperture 74 mm W100 x H200 x D144 mm
This limited edition enclosure was sold when the P-610 series was reprinted to commemorate the 50th anniversary. As a matter of fact, the beautiful finish with Joseph's maple finish is a diamond tone. Selling only in boxes is rare. If you only have a unit, don't miss this opportunity! There are scratches on the exterior. (FUJISAWA KOSHI)
Accessories: saran net
Main specifications: bass reflex type dimensions W294 x H530 x D250 mm 8 kg
The price has been reduced. 2025/10/7 sales price 25,000 yen bass reflex enclosure for 20cm units. A saran net is also attached, and the construction is relatively careful. Slight wounds and blows are scattered. *Speaker terminals are not included. (FUJISAWA KOSHI)
Accessories: saran net
Main specifications: plate thickness 2 cm opening diameter 18 cm W350 x H600 x D350 mm 16 kg
The price has been reduced. 2025/10/4 sales price 25,000 yen. Unspecified 38cm unit enclosure. If you've been looking for this size, take this opportunity. You can see a feeling of use on the exterior, marks, stains, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W x H900 x D450 mm 42 kg (actual measurement)
Enclosure for the popular standard DIATONE P-610 unit. The thickness of the front baffle is 16 mm, and the construction is good. There are small scratches and a break in the saran net frame. *Speaker terminals are not included. (FUJISAWA KOSHI)
Accessories: saran net
Main specifications: plate thickness 1.6 cm W330 x H520 x D315 mm 6.2 kg
12cm bass reflex enclosure You can easily enjoy making a speaker by combining it with a 12cm full range unit of your choice. There are small scratches, chips, and breaks in the saran net frame. *Speaker terminals are not included. (FUJISAWA KOSHI)
Accessories: saran net
Main specifications: plate thickness 1.5 cm opening diameter 10 cm W165 x H260 x D195 mm 2.3 kg
Self-made enclosure with unspecified details. The previous owner installed and used an Altec woofer 414Z, driver 806A, and horn H-811B. The upper and lower enclosures are separated and not connected. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: horn part: W492 x H232 x D380 mm 8.5 kg (actual measurement) woofer part: W492 x H651 x D445 mm 22.8 kg (actual measurement) overall: W492 x H883 x D445 mm 31.3 kg (actual measurement)
The price has been reduced. 2025/9/20 sales price 25,000 yen. ※ It is inexpensive because it is in poor condition, such as dirt, stains, scratches, marks, and holes in the saran net. It is a 38cm woofer enclosure jointly developed by Sansui and JBL. The board is also thick and sturdy, so if you use a JBL unit, you can enjoy thick sound with a low center of gravity (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: internal volume 222 L dimensions W590 x H980 x D470 mm weight 48 kg
The disposal price has been reduced! (Member prices are not applicable) 2025/8/3 sales price 79,800 yen, rice pine plywood specification. It is made of rice pine plywood with a firm cat's eye on the inside, and when you hit it, it makes a dry sound. If you make a sound with a unit with good sensitivity such as 515, the fine texture of rice pine sounds and brings out the performance of the unit itself. Dullness, abrasions, etc. due to use over time can be seen on the exterior (Asaine Satoshi Law)
Accessories: none
Main specifications: W760 x H1065 x D605 mm 40.5 kg (both measured values)
※This is an enclosure only. Diaton 50th Anniversary Genuine P-610 Enclosure This is a highly rigid cabin with a front baffle plate thickness of 25 mm and a weight of 8 kg (Murakoshi Yoichi)
Accessories: none
Main specifications: front bass reflex cabinet W294 x H530 x D240 mm plate pressure 12 mm (front baffle 25 mm) 8.2 kg
This is an enclosure for the Monitor 2115. You can enjoy moist music with a full 20cm range. There are scratches, chips, and line scratches on the exterior. Also, there is a flaw in Saran Net (Yonejima Satoshi)
Accessories: saran net
Main specifications: W350×H630×D355mm 14kg
Self-made enclosure. The previous owner said it was made for the DIATONE P-610. Since it's uncolored, it's a good idea to finish it with your favorite color (Murakoshi Yoichi)
Accessories: none
Main specifications: W330 x H520 x D315 mm, opening diameter 144 mm, weight 8.5 kg
The price has been reduced. 2025/8/10 sales price 5,000 yen. Self-made horn enclosure. It came with a JBL horn 2386. Speakon input terminal included. The exterior is covered with cloth. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W480 x H315 x D610 mm 9 kg (actual measurement)
Self-made 3LZ style enclosure. It's hurt a lot (Oikawa Tetsuji)
Accessories: none
Main specifications: W380 x H585 x D240 mm screw pitch 390 mm aperture diameter 280 mm weight 7.4 kg
JBL standard 38cm enclosure. The 38 cm size is attractive because it is just the right size to take advantage of its impressive size. Depending on your preferences, you can play in 2 ways and enjoy various uses. The exterior is dull and there is a feeling of use such as small scratches on the top plate (Asaine Tomoho)
Accessories: Saran net (self-made)
Main specifications: 38cm unit enclosure (2226H recommended) front bass reflex internal volume 140 liters minimum playback frequency 40 Hz W546 x H775 x D448 mm 26 kg
This is a finished product that has been assembled and painted by the manufacturer. Backload horn enclosure ideal for FOSTEX FE108-SOL. The baffle board is made of birch plywood and other materials, which have high density, high rigidity, and excellent sound resonance. It has a good finish unique to finished products. Mounting screw marks remain. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W180 x H900 x D300 mm approx. 12 kg
A TOC studio monitor enclosure that is small but has a sense of craftsmanship in the construction of ducts. If you are looking for this size with a width of 49.5 cm for a 38 cm unit, please take this opportunity. It comes with a saran net, but it cannot be attached (because there is no reception). You can see a feeling of use such as appearance, dullness, scuffs, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: 38cm hole diameter 35.5 cm bolt pitch 425 mm W495 x H630 x D470 mm 27.8 kg (actual measurement)
Appendix to the 2014/8 issue of Stereo magazine. Appendix This is a double bass reflex speaker box for PT20K and PW80K. Serial 0960529 CE, 0960554 CE (Fujisawa Yukishi)
Accessories: instruction manual, original box, mounting screws
Key Specifications: Double bass reflex enclosure W128 ✕ H328 x D188 mm
Self-made backload enclosure. It weighs 41 kg per bottle, and is quite sturdy. There are scratches, dirt, etc. on the whole. Shipping costs will be estimated separately (Oikawa Tetsuji)
Main specifications: W360 x H1055 x D535 mm aperture diameter 185 mm screw pitch 212 mm 41 kg (actual measurement)