Only 1 speaker cable is an orthodox parallel cable with 336 untreated 0.1 mm diameter wires strung together at the end of 4.0 m. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2025.12.13 Continuity confirmed
Only 1 speaker cable is an orthodox parallel cable with 336 untreated 0.1 mm diameter wires strung together at the 10.0 m end. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance Information: 2025.12.13 Continuity confirmed
Accessories: none
LAN cable 3.0 m high cost performance AudioQuest LAN cable. By using 0.5% coated LGC conductors, a more clear, dynamic, and complex sound is achieved. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: original box, dustproof cap
The 5.0 m pair of untreated OFC single-wire conductor Art Link series isolation lines reduce capacitance and use foam PE insulators with excellent insulation performance. OFC single-wire conductor with thick sound quality. There is dirt on the sheath (Kojima Yosuke)
Accessories: none
Phono cable uses 1.5m RCA-DIN (straight) specification conductors made from a hybrid of high-purity oxygen-free copper, centering on ultra-high purity 6N copper. It is a model that incorporates various technologies in order to eliminate the ultra-fine low output power loss of MC cartridges as much as possible (Kojima Yosuke)
Accessories: original box (partially damaged)
The 5.0 m pair of untreated OFC single-wire conductor Art Link series isolation lines reduce capacitance and use foam PE insulators with excellent insulation performance. OFC single-wire conductor with thick sound quality. There is dirt on the sheath (Kojima Yosuke)
Accessories: none
A typical model of German monitor (now Inakustik) with an unprocessed 0.6 m pair end of the speaker cable. This classic model is characterized by its supple, thick, and glossy tone. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2025.12.14 continuity confirmed
Accessories: No accessories
Speaker cable is a speaker cable with a wide range of 511 Y lug tinned high-purity copper wires at the end of a 5,0m pair. The exterior has a feeling of use such as dullness and dirt on the sheath (Takahashi Nobuyuki)
Maintenance information: 2025.12.14 continuity confirmed
Accessories: none
* The damping material between some conductors is inexpensive because there is a part where the damping material between the conductors is raised on the inside (photos 5 and 6) Speaker cable 2.0m pair end, untreated 7N copper conductor, stress-free processing, speaker cable that assumes connection to a bookshell-sized speaker, etc. The high SN feeling brought about by the parallel structure and wide range playback is also suitable for matching with high-resolution compatible speakers, etc. There are stains and abrasions on the sheath (Kojima Yosuke )
Accessories: none
Digital cable A digital cable aiming for high-dimensional digital transmission with an amplifier built into the 1.0m RCA plug path. I'm addicted to the good extrusion with a flat balance, just like a single wire cable. (FUJISAWA KOSHI)
Maintenance information: 2025.12.13 sound output confirmed
Accessories: instruction manual, original box, AC adapter
It is an inexpensive and easy to handle digital cable, only 1.0 m per cable. You can see a feeling of use such as dullness on the exterior (Tamai Jun)
Maintenance information: 2025.12.13 continuity confirmed
Accessories: none
It is an inexpensive and easy to handle digital cable, only 1.5 m per cable. You can see a feeling of use such as dullness on the exterior (Tamai Jun)
Maintenance information: 2025.12.13 continuity confirmed
Accessories: none
The 1.5m XLR cross cable is hard to get used to bending, and is also used on stage and in the press. The crossover cable specification is effective for connecting American-made devices and commercial equipment to domestic devices. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Maintenance information: 2025.12.13 continuity confirmed
Accessories: none
Balance cable 1.0m pair BALANCED MUSIC LINK SUPER Anyway, I recommend this cable if you are looking for an overwhelming range and high resolution. There are slightly inorganic parts, so it is also recommended for those who think the current sound quality is too thick. There are scratches on the filter box (Kojima Yosuke)
Speaker cable 1.5m pair ends untreated Belden's classic speaker cable, nicknamed “sea snake.” It is used not only by broadcasting stations and recording studios, but also as a speaker cable for car audio. Since it is a twisted-pair cable, the generation of noise affected by the outside is mutually counteracted, and communication distance is extended. The orange and black braided cable is impressive, and it features a tight sound. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2025.12.12 continuity confirmed
Accessories: none
Speaker cable is a standard cable that has become synonymous with unprocessed speaker cables sold at 7.2m 1 end. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2025.12.12 continuity confirmed
Accessories: none
RCA cable 4.0m pair with FURUTECH RCA plug OFC conductor speaker cable can be used as both a speaker cable and power cable, and is a masterpiece of S/A Lab that was a big hit. The thick, tight low frequencies of the extruded sound image are attractive (Kojima Yosuke)
Accessories: none
RCA cable 1.0m pair 7N copper wire+3 types of copper wire, 8A core multi-hybrid conductor cable structure. It is an RCA cable that suppresses the individuality of the cable sound as much as possible and aims for a natural sound. There is a slight dullness on the exterior of the Pilar Tool (Asaine Tomoho)
Maintenance information: 2025.12.8 continuity confirmed
Accessories: none
1.5m pair of XLR cables are popular Accuphase balanced cables. A domestically produced cable characterized by straightforward sound quality. The exterior has a feeling of use such as rubbing against the sheath and dullness on the plug (Takahashi Nobuyuki)
Maintenance information: 2025.12.8 continuity confirmed
Accessories: none
Digital cable 1.5m RCA terminal 5N pure silver core terminals are also recommended not only for connecting to the highest high conductivity digital cable or DAC with pure silver contacts, but also for connecting to high-precision clocks (Hiura Katsuji)
Maintenance information: 2025.12.6 continuity confirmed
Accessories: original box terminal cap
SR series RCA cable 1.0 m pair has a 2-core structure with 99.99999% OFC conductors (0.1 mm diameter x 105 stranded wire structure), the shield part is high-density braided with 192 7N high-purity copper wires, and the plug uses rhodium plating. The exterior is slightly dull on the plug (Takahashi Nobuyuki)
* It is inexpensive because it is in poor condition. It is an early model before the terminator module, which is also a characteristic of the company, was adopted, 1.5 m pair of RCA cables. It is a sound with good sound separation and a good sense of localization, and dullness and small scratches over time can be seen on the exterior, and eccentricity can be seen on the terminals (Tamai Jun)
Maintenance information: 2025.12.9 continuity confirmed
Accessories: none
SAEC original new collet chuck structure is used for the 0.6-m RCA terminal high sampling compatible balanced shield structure plug for coaxial digital cable. There is a feeling of use such as dullness and scratches on the plug (Jun Tamai)
Maintenance information: 2025.12.11 continuity confirmed
Accessories: none
Power cable 1.8 m PSE certified, PCCC-A conductor plug P/C-046 exclusive version, 3-layer shielded construction. There is a lack of sound and a sense of dynamism. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Maintenance information: 2025.12.11 continuity confirmed
Accessories: none
Balance cable is a 1.0 m pair line cable that uses PCOCC and OFC hybrid conductors. It can be expected to minimize electromagnetic induced strain, loss, and external noise. There is a feeling of use such as dullness and dirt on the plug (Jun Tamai)
Maintenance information: 2025.12.11 continuity confirmed
Accessories: none
This is an entry model that uses a 1.0 m pair of RCA cables with a symmetrical coax structure. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.4 continuity confirmed
Accessories: none
Speaker cable is a 1.9 m pair terminal, an untreated single crystal conductor, PCCCC+ μ-OFC conductor with special annealing treatment, and has straightforward sound quality without habit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.4 continuity confirmed
Accessories: none
The RCA cable uses a 1.0m pair of 8N conductors, double shielded, and denser insulation and compression twists. It is a high cost performance cable with a realistic sense of attack. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.1 continuity confirmed
Accessories: none
BNC cable 2.0m 75Ω BNC cable from Oyaide's professional brand NEO. Precision conductor 102 SSC uses a single copper wire and cordel structure close to air insulation to suppress resistance loss and dielectric loss, and accurately transmit digital signals and word clock signals. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.1 continuity confirmed
Accessories: none
Digital cable, 0.6 m, RCA terminal, is a staple SAEC coaxial digital cable! While the price is easy to use, you can enjoy high-definition sound with a well-made structure. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.1 continuity confirmed
Accessories: none