This is Altec's classic 1 inch 4-sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. There are small scratches on the exterior (Sasaki Shota)
Accessories: none
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/18 sales price 29,800 yen. Technics' rare scorpion horn driver is not included. It is a horn one size larger than the same driver horn of the same type from Pioneer, the PM-101. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: outer diameter W492 x H312 x D360 mm throat inner diameter approx. 28 mm, 5.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/29 sales price 39,800 yen This is a bi-radial horn that uses an optimized aperture design. The horn's throat can be directly connected to the driver's phase plug, and we have succeeded in optimizing system performance. The main body is made of plastic reinforced with fiberglass, which maintains strength while reducing weight and eliminates resonance. *Since this is a 1.5 inch throat horn, a 2 inch throat driver cannot be used. There are small scratches on the entire exterior. Serial 005060, 005019 (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible unit 2447H/J, 2451H/J crossover frequency 500 Hz throat diameter 38 mm W559 × H457 × D254 mm 2.2 kg
This is Altech's classic 1 inch 4 sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. There is a feeling of use on the exterior due to dullness, scratches, paint chips, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
※ It is inexpensive because it leaves scratches, dents, paint deterioration, and dirt. A multi-cellular horn that enhances the driver's personality. It does not add to the individuality of a horn and has the property of extending only the characteristics of a driver. It is recommended not only for A5 horns, but also for those who make their own (Daiki Goto)
Accessories: none
Main specifications: 10 partial horn cutoff 500 Hz compatible unit 288/290/291 series W762 x H330 x D438 mm 9.1 kg/book
The price has been reduced! 2024/3/8 sales price 198,000 yen ※Self-made stay is included. The sectional horn used in A5. It has 90 degrees of horizontal diffusivity and is characterized by a spacious sound. At the same time, the texture in the mid-high range is not thin, and it makes you feel that it is well-built. The exterior is dirty. (FUJISAWA KOSHI)
Accessories: self-made stay
Main specifications: horizontal orientation characteristics, 90 degrees, vertical orientation characteristics, 40 degrees, crossover frequency of 300 Hz or more, compatible driver 288C/288D/290E/291-16A 15.8 kg/book
The price has been drastically reduced. 2024/2/29 sales price 17,800 yen Small and lightweight flat front bi-radial horn. It is useful for stabilizing horizontal characteristics and correcting driver characteristics. It is a horn that stretches well in the middle range, making it difficult to feel noisy in the high range. Suitable for slightly smaller systems (Kanai Hidetsugu)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver, 2426H/J, use minimum frequency of 500 Hz, recommended minimum crossover frequency of 630 Hz, made of high density polyurethane, W448 x H173 x D 174 mm, 1.4 kg
The price has been reduced! 2024/2/22 The EXCLUSIVE Sectoral Wood Horn has arrived for the first time in a long time at a sales price of 99,800 yen! This horn is ideal for TD-2001, ED-911, etc. You can enjoy the exquisite sound of Japanese maple plywood with this wooden horn. A JBL 1 inch driver can also be attached. There are scratches and scratches on the exterior. Serial BC1012/BC1013 (Tamura Eiji)
Accessories: No accessories
Main specifications: Sectoral wood horn cutoff frequency 325 Hz mounting pitch diameter 57.2 mm throat opening hole diameter 25.4 mm opening dimensions W630 x H80 mm horizontal opening angle 120 degrees W630 x H90 x D381 mm 5.9 kg
The price has been reduced! 2024/2/23 sales price 39,800 yen ※Painted in gray. This is Altec's classic 1 inch 4 sectional horn. You can enjoy the horn sound unique to Altec with your favorite 1-inch driver, such as the 802-8D, with good sharpness. There are peeling and scratches on the exterior. Serial 55625, 55665 (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
A rare Yamamoto sound craft wood horn. It is a diffraction horn made of Asada cherry wood, which is beautiful in terms of sound quality and appearance, and the company is particular about it. Compatible with JBL 1 inch drivers. There are some scratches on the exterior. Serial 605021/605022 (Tamura Eiji)
Accessories: none
Main specifications: diffraction horn recommended crossover frequency 800 Hz compatible driver TAD 2001, JBL LE175, LE85, 2420, 2425, 2426, etc. 1 inch driver W448 x H140 x D269 mm 5.6 kg
This is an Altec 1.5 inch horn such as 288. It's a sound with vertical momentum, and although it's not a wide range, the energetic sound is exquisite. There are scratches and scratches on the exterior (Tamura Eiji)
Accessories: No accessories
Main Specifications: Mantaray Horn Polyester Fiberglass Recommended Crossover 500Hz Compatible Unit/288/291 Series W324 × H327 × D317 mm 1.6 kg
This horn is designed for LE85 and LE175. Since the effective length of the exponential horn has been lengthened, the connection with the woofer is smoother. There are scratches and repair marks on the exterior. Serial 7428/9098 (Tamura Eiji)
Accessories: No accessories
Main specifications: throat diameter 2.5 cm, crossover frequency 800 Hz or higher, compatible models/LE175, LE85 horn total length 293 mm (horn depth only) dimensions W250 x H150 x D60 mm weight 2.7 kg
The price has been reduced. 2024/2/18 sales price 45,000 yen ※Since there is no dedicated slot for 2328, it is cheap. JBL's large radial horn is now in stock. You can experience the dynamic sound full of penetrating power unique to 2-inch drivers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: recommended crossover 500 Hz size W810 x H210 x D510 mm weight 11.6 kg
The price has been drastically reduced. 2024/2/18 sales price 248,000 yen with stand 2505! 2 inch horn+ lens with huge slant plate As nicknamed “Ghost Horn,” it has the size and presence. The sound of an exponential horn with an elliptical aperture creates a natural sound that is not very peculiar. You can see a feeling of use on the exterior, paint removal, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: stand
Main specifications: crossover frequency 800 Hz, throat diameter 50 mm, W914 x H305 x D483 mm, weight 10.5 kg (stand not included)
※Since special slot adapters 2328 and 2329 are not included, it is inexpensive. A large radial horn developed for professional use. The exterior is 60 degrees horizontal and 40 degrees vertical, and you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: crossover 500 Hz sound pressure level (new JIS) 114 dB W613 x H203 x D508 mm 11.2 kg
※The paint on the throat part is in poor condition, such as peeling paint and scratches, etc., so it is inexpensive. A combination of a 2-inch driver horn and acoustic lens used for short-range PAs and monitors. It makes 2441, 2440, etc. sound sharp. Recommended for those who think the sound is too high with a radial horn (Ryo Mizusaki)
Accessories: none
Main specifications: directivity: horizontal 100° x vertical 45°, throat diameter: 51 mm, crossover frequency: 800 Hz, 5.2 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/14 sales price 39,800 yen GOODMANS screwdriver and horn set. A thick die-cast horn and driver all in one. The sound connection is smooth, and it seems that they can play an active role in a wide range of genres regardless of genre. Serial 16371 25974 (Tomonori Asaine)
Maintenance information: 2021.2.18 maintained (16371 side, complete repair and maintenance for both broken wires)
Accessories: cable
Main specifications: 15 ohms, 50 W, 650 to 8,000 Hz, recommended crossover 950 Hz, 5,000 Hz, baffle opening diameter 143 x 65 mm, depth 253 mm, 1.4 kg (actual measurement)
Comes with a dedicated stand! Professional acoustic lenses in the shape of a “beehive”. If you combine 375 or 2440, you can enjoy the feeling of extrusion that can only be experienced with this horn and a sense of energy that is bathed in your whole body. The exterior has stains, etc., but it is a beautiful individual for its age. Serial 1172/1174 (Tamura Eiji)
Accessories: stand
Main specifications: 2 inch driver horn crossover frequency 500 Hz throat diameter 50 mm W343 x H420 x D420 mm 13.6 kg
The price has been reduced. 2024/1/21 sales price 19,800 yen A short type bi-radial horn that is light and easy to use. It has a light sound loss, and you can enjoy a good sound that won't lose even when matched to a larger system (Takasaki Atsushi)
Accessories: none
Main specifications: Bi-radial horn cutoff 400 Hz horizontal 90 degrees vertical 40 degrees foam resin W445 x H279 x D236 mm baffle opening dimensions W403 x H238 mm (front mount) baffle plate W590 x H400 mm 3.9 kg/unit
The price has been reduced. 2024/1/19 sales price 59,800 yen ※The shape is slightly different on the left and right, so it's cheap. The SG-505TT was originally mounted. Deadened. There are dirt and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: Mid-range horn, total length 560 mm, aperture diameter: 400 mm, cutoff frequency: 300 Hz, optimal crossover, 500 Hz to 600 Hz, material: aluminum aperture, round, straight shape
First arrival! 2" wood horn JBL and TAD 2-inch drivers can be used. How about it together with the TCX-1500AL enclosure which is in stock at the same time. There are small scratches and paint peeling (Oikawa Tetsuji)
Accessories: none
Main specifications: W520 x H235 x D380 mm 8.4 kg
The price has been drastically reduced! 2023/12/16 sales price 69,800 yen round straight horn for medium to high ranges. It is originally used at 1.2 kHz or higher, but since it is a hyperpolytic curve, it can also be used at 1 kHz. The exterior is dull and deadened (Satoshi Yonejima)
Accessories: No accessories
Main specifications: cutoff frequency 600 Hz, optimal crossover, 1 kHz to 1.2 kHz, total length 232 mm, aperture 180 mm
The price has been drastically reduced! 2023/12/16 sales price 69,800 yen round straight horn for medium to high ranges. There is a feeling of wear on the exterior such as scratches and dullness. Also, deadening has been applied. (Miura Kimiya)
Accessories: No accessories
Main specifications: round straight horn for mid-range, material, aluminum aperture, total length: 165 mm, aperture: 145 mm, cutoff frequency: 800 Hz, optimal crossover, 1 to 1.2 kHz
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/4 sales price 8,000 yen ※It is cheap because the construction is different on the left and right. Unspecified 2" horn. The previous owner had a JBL/2445J mounted. In addition to rust and scuffs on the exterior, the color is different on the left and right, and the inner structure is different (Hiroki Aso)
Accessories: none
Main specifications: aperture diameter 225 x 220 mm opening screw pitch length 238 x width 252 mm throat diameter 50 mm throat part screw pitch 72 mm W280 x H295 x D 265 mm 1.8 kg/1
A short bi-radial horn that is light and easy to use. It has a light sound loss, and you can enjoy a good sound that won't be lost even when paired with a larger system. There are small scratches, dullness, dirt, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: Bi-radial horn cutoff 400 Hz horizontal 90 degrees vertical 40 degrees foam resin W445 x H279 x D236 mm baffle opening dimensions W403 x H238 mm (front mount) baffle plate W590 x H400 mm 3.9 kg/unit
Shorthorn very similar to JBL shorthorn 2307. The previous owner installed and used the company's 2420. There is some dullness (Murakoshi Yoichi)
Accessories: none
Main Specifications: Total length 220mm Bolt pitch: 100mm on exit side 50mm on entrance side
Unspecified short horn for 1 inch. JBL can be mounted. The exterior has peeling paint and stains (Tamura Eiji)
Accessories: No accessories
Main specifications: W190 x D119 x H126 mm
Significant price reduction. 2023/12/11 sales price 19,800 yen JBL bi-radial horn. It is a short type that is easy to use. The lightness and ease of removal is attractive. You can enjoy the good sound even when matched to a larger system. The logo seal is missing (Daiki Goto)
Accessories: none
Main specifications: Bi-radial horn cutoff 400 Hz horizontal 90 degrees vertical 40 degrees foam resin W445 x H279 x D236 mm baffle opening dimensions W403 x H238 mm (front mount) baffle plate W590 x H400 mm 3.9 kg/unit
Disposal prices have been reduced! (Member discount is not applicable) 2023/12/4 sales price 10,000 yen 2 inch horn with unknown details. The previous owner had a JBL/2445J mounted on it. The exterior has rust, scuffs, etc. (Hiroki Aso)
Accessories: none
Main specifications: opening diameter 225 x 220 mm, opening screw pitch length 238 x width 252 mm, slot part diameter 50 mm, slot part screw pitch 72 mm, W280 x H295 x D265, 1.8 kg/1
This is a round straight horn with a goto unit. Detening processing has been applied. On the exterior, dirt and dust are conspicuous (Yonejima Satoshi)
Accessories: no accessories
Main specifications: round straight horn for middle and bass, total length 600mm, opening caliber, 400mm, cutoff frequency, 300 Hz, optimal crossover, 400-500 Hz, material, aluminum aperture, weight approx. 7 kg
For JBL 1" drivers, commonly known as beehive horns. Recommended for LE175 and LE85 users. There is a feeling of wear such as rust, small scratches, scuffs, etc. on the exterior (Kobayashi Hitoshi)
Accessories: none
Main specifications: Recommended crossover frequency 1200 Hz directivity 60 degrees (cone) horn total length 171 mm Compatible units LE175, LE85
JBL 2328 with slot This horn was made to match Yamaha's JA-6670 and JA-6681. The quality of construction is amazing at Yamaha. There is a slight feeling of use, but it is a beautiful individual for the model year (Fujisawa Yukishi)
Accessories: none
Main specifications: cutoff frequency 230 Hz, W725 x H250 x D580 mm, approx. 11.5 kg
The price has been drastically reduced. 2023/12/7 sales price around 178,000 yen is good! Large wood horn Solid construction and a lot of weight! It seems to fit JBL and TAD 2 inch drivers. You can enjoy the thick, rich sound (Fujisawa Yukishi)
Accessories: none
Main specifications: recommended crossover frequency 600 Hz throat diameter 49 mm 2 inch driver W635 x H230 x D365 mm approx. 18 kg
This is Altec's standard 4-sectional horn for 1 inch. You can enjoy the sharp horn sound unique to ALTEC with a 1-inch driver of your choice, such as the 802-8D. Rust and dullness are slightly noticeable (Fujisawa Yukishi)
Accessories: none
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D486 mm 6.7 kg
It is probably my own work that imitates a JBL 2329 double throat. It can be attached to JBL 2350, 2355, 2397 horns, etc. A 2 inch slot such as a JBL 2440 or 375 is suitable as a driver. (FUJISAWA Koshi)
Accessories: none
Beautiful item with original box and dedicated stand! A “beehive” type professional acoustic lens. If you combine 375 or 2440, you can enjoy a sense of extrusion that can only be experienced with this horn and a sense of energy as if you were being bathed in with your whole body. ※What was originally an unopened item has only recently been opened. There is some deterioration over time, and there are very slight small scratches, but it is in a beautiful state. Serial 3447 3463 (Yamato Yuki)
Accessories: Stand for original box (JBL2505)
Main specifications: 2 inch driver horn crossover frequency 500 Hz throat diameter 50 mm W343 x H420 x D420 mm 13.6 kg
First arrival! Super dreadnought horns! A whopping 25 kg per bottle with stainless steel hollowed out! From the outside, I get the impression that they listen to the driver's sound with no resonance, but it makes a surprisingly resonant sound. A 1 inch driver such as the TD-2001 can be attached. There are small wounds and dullness (Oikawa Tetsuji)
Main specifications: 1 inch diameter 180 mm x D165 mm 25 kg
Disposal prices have been reduced! (Member discount will not apply) 2023/11/8 sales price 148,000 yen wood horn with unknown details. It feels like the horn that was originally mounted on the speaker has been removed. It has a pretty solid construction, and the JBL 375 was originally mounted on it. The exterior has scratches, peeling, etc. (Tamura Eiji)
Accessories: no accessories
Main specifications: W660 x H60 x D360 mm, weight 9.8 kg
Arrived for the first time in 5 years! A rare, high-grade horn sold by YAMAHA in the early 80s. A wood horn with a good sound that uses African paduk used in marimbas, etc. It comes with a slot for the company's AD-3520 (Fujisawa Yukishi)
Main Specifications: Recommended Crossover: 700Hz Cutoff Frequency: 220Hz Size W800 ✕ H195 ✕ D400mm Weight 29kg
Disposal prices have been reduced. Member prices are not applicable. 2023/6/17 sales price 99,800 yen for initial drivers with a narrow slot width. The exclusive straight horn for the Gotou unit has been deadened. You can experience the delicate and deep unique horn sound. There are scratches and scrapes in places (Kojima Yosuke)
Accessories: none
Main specifications: depth 950 mm, opening diameter 540 mm, driver hole 35 mm, cutoff frequency 200 Hz, optimal crossover 300 Hz to 350 Hz
Prices have been drastically reduced. 2023/10/28 A rare wooden sand-filled horn from Onken (Onken) with a sales price of 138,000 yen is in stock. The material is very carefully made and is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound (Sasaki Shota)
Accessories: none
Main specifications: wooden sectional horn, metal slot, recommended usage frequency band, 500 to 25,000 Hz, compatible unit, OS-500MT, W560 x H250 x D420 mm, 6.82 kg
Disposal prices have been reduced! (Member discount will not apply) 2023/9/17 sales price 45,000 yen with wood cabinet! Mid-range driver unit. This is a screwdriver+horn set. Since it is for the mid-range, it does not produce high frequencies. It is used in speaker systems such as SENTRY III and SENTRY IVB. I recommend it to HiFi enthusiasts. The condition is small scratches and dullness over time, and peeling of the veneer is scattered on the wooden case. Serial 832 (Yamato Yuki)
Maintenance information: 2023.9.17 Operation confirmed
Accessories: none
Main specifications: 8 Ω 500 to 6,000 Hz 105 dB crossover 800 Hz diameter 104 x depth 87 mm weight 2.2 kg (driver only) wood cabinet actual measured dimensions W398 mm x H122 mm x D197 mm
Comes with a dedicated stand! A “beehive” type professional acoustic lens. If you combine 375 or 2440, you can enjoy a sense of extrusion that can only be experienced with this horn and a sense of energy as if you were being bathed in with your whole body. The exterior is generally beautiful with no noticeable scratches. Serial 01645 01719 (Asaina Tomonori)
Accessories: stand
Main specifications: 2 inch driver horn crossover frequency 500 Hz throat diameter 50 mm W343 x H420 x D420 mm 13.6 kg
The price has been reduced. 2023/10/6 Sales price 10,000 yen ※1 bottle only. This is a rare JBL bi-radial horn. It is thicker and heavier than the 2385A, and is well built. The 2385 is a fixed directional horn with a slightly narrowed horizontal direction angle compared to the 2380, and the sound pressure level is about 2 dB higher. Also, the throat diameter, horn length, and opening dimensions are the same as 2380. The exterior has scuffs, scratches, and stains. Serial 021530 (Tamura Eiji)
Accessories: no accessories
Main specifications: directivity (-6 dB points) horizontal 70° (500 Hz to 16 kHz) vertical 40 degrees (2 kHz to 16 kHz) throat diameter 5 cm dimensions W445 x H279 x D236 mm weight 4.6 kg/1 bottle
Prices have been drastically reduced. 2023/7/15 sales price 8,000 yen. A self-made horn whose purpose is unknown. Why don't you attach it to a tweeter, etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: opening diameter 13 x 71 mm W225 x H145 x D146 mm 859 g
Unspecified Sloat. It is a straight type. It's been deadened (Oikawa Tetsuji)
Main specifications: length 332 mm, throat outer diameter 52 mm, inner diameter 40 mm, 2.9 kg (actual measurement)
The price has been reduced. 2023/7/16 sales price 49,800 yen 2inch straight short horn. Compared to 2350, etc., there is little afterglow, and it has a sharp sound that comes off quickly and disappears quickly. It's a straight yet straightforward sounding character, and it's the perfect size for those who want to embed both horn and tweeter into an enclosure. The appearance, paint peeling, scuffs, dullness, etc. can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: 500 Hz to 90 degrees horizontally 45 degrees vertically
The price has been reduced. 2023/9/2 sales price 39,800 yen Altec standard, 4 sector horn for 1 inch. You can enjoy the sharp, sharp horn sound unique to ALTEC with your favorite 1-inch driver, such as the 802-8D. There is a feeling of use such as appearance, dullness, rust, paint peeling, etc. (Kobayashi Hitoshi)
Accessories: mounting stand bracket
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D486 mm 6.7 kg
The price has been reduced. 2023/9/6 Sales price 59,800 yen ※Deadening has been applied. Round straight horn for mid to high frequencies. It can be combined with SG370, etc. The exterior is covered with dust and paper. (MIURA Kimiya)
Accessories: no accessories
Main specifications: total length 300 mm, aperture 220 mm, cutoff frequency 500 Hz, optimal crossover 800 Hz to 1 kHz