The price has been drastically reduced. 2025/2/5 sales price 220,000 yen Popular A shell long arm. This arm has a taut, and tight sound unique to this arm. Please enjoy the fluttering sound, which is a bit different from the G shell. The nut that tightens the armrest is missing. The exterior is slightly dull (Mizusaki Ryo)
Maintenance information: 2025.2.5 continuity confirmed
Accessories: original box (foam only), connecting cable, armrest (without nuts)
Main specifications: A shell dedicated tone arm, dynamic balance type, needle pressure 0 to 7 g, overhang 11 mm, effective length 320 mm (from screw on pivot to needle tip)
The disposal price has been reduced. Member prices are not applicable. 2021.6.23 sales price 49,800 yen ※Continuity has been confirmed, but since the terminal has not been processed and the ground wire has been cut, it is currently sold. Tone arm for DECCA MARK 1/2/3 cartridges Simple structure using straight pipes. Since the needle pressure is a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain an optimal condition for the company's head (Murakoshi Yoichi)
Maintenance information: 2021.6.13 continuity confirmed
Accessories: armrest
Main specifications: static balance type, total length 303 mm, execution length 225 mm
Maintained! This is an A shell compatible version of the rare orthophone EMT930 RMA229 arm. Torrens TD-124 base is included, and an RCA terminal is attached, so you can use your favorite cable (Murakoshi Yoichi)
Maintenance information: 2025.1.29 maintenance (wiring correction, RCA terminal, GND terminal replacement, armboard board, RCA cable, etc. cleaning)
Main specifications: dynamic balance type needle pressure adjustment 0 to 7 g (0.5 g steps)
A lightweight needle pressure tone arm that is an improved model of the 3009S2. It specializes in light needle pressure, narrows down applications, and has sharpened sharp followability. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent ※The wood block in the photo is not included (Oikawa Tetsuji)
Maintenance information: 2025.1.28 Maintained (lifter internal dismantling cleaning)
Accessories: instruction manual, shell, template, original box
Main specifications: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g
Audio-Technica's commercial tone arm. We are proud of its simple structure and careful construction typical of the company. Operability such as zero balance and needle pressure adjustment is excellent. The firm, powerful, and extruded sound is appealing. Serial 4834 (Fujisawa Yukishi)
Maintenance information: 2025.1.15 continuity confirmed
Accessories: connection cord, armrest
Main specifications: execution length 254 mm overhang 15 mm needle pressure range 0 to 3.0 g 0.5 g step arm height 45 to 70 mm arm base hole 23 mm cartridge dead weight 8 to 28 g
The price has been reduced! 2025/1/7 sales price 59,800 yen high compliance tone arm. The light needle pressure cartridge can be controlled so that it can be used in the best condition. Also, although the headshell is integrated, each carrying arm can be replaced. The exterior is dull and dirty over time. (YONEJIMA Satoshi)
Maintenance information: 2025.1.7 operation confirmed
Accessories: connection cord
Main specifications: Static balance type fluid dump type titanium arm, effective length 229 mm, needle pressure 0 to 2.5 g, compatible cartridge weight up to 13.7 g
The price has been drastically reduced. 2024/12/27 Sales price 138,000 yen Maintained! Dynamic balance short arm The strong sound brings out the characteristics of the SPU-G shell type to the fullest. The exterior is dull (Murakoshi Yoichi)
Maintenance information: 2024.12.17 Maintained (broken shaft repair. Output cable RCA terminal deterioration replacement. continuity test)
Accessories: instruction manual, armrest, template, phono cable
Main specifications: Dynamic balance type, total length: 300 mm, execution length: 228 mm, overhang: 16 mm, needle pressure range: 0 to 7.5 g, needle pressure range: 0 to 7.5 g, direct reading arm, base hole, 22 mm, cartridge dead weight: 7 to 32 g
The price has been reduced! 2024/12/21 sales price 49,800 yen ※It is cheap because it is in poor condition. Also, the wiring is bare. Orthophone short arm. The gentle tracing ability unique to the static balance type, which is different from the dynamic balance type of the RMG system, is attractive. If the height is right, it can be installed as is, and it is easy to use. The exterior has a feeling of use such as dullness and scratches, and an external arm lifter is attached to the main body (Tamai Jun)
Maintenance information: 2024.12.21 continuity confirmed
Accessories: armrest
Main specifications: static balance type, total length: 300 mm, execution length: 212 mm, needle pressure range: 0 to 10 g (1 g step)
The disposal price has been reduced. Member discounts are not applicable. 2024/11/24 sales price 148,000 yen with fluid damper FD200! It is an arm that inherits the basic design of the 3012 and has increased versatility with all players through downsizing. It is also attractive that the 2-split main weight is compatible with lightweight cartridges as well as heavyweight cartridges such as SPUs. Due to the sharp followability of the knife edge, the clear and cohesive sound quality still boasts high performance. Oil shortage (Murakoshi Yoichi)
Maintenance information: 2024.11.24 Operation confirmed
Accessories: connection cable (external product), instruction manual (copy)
Main specifications: Static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), variable needle pressure range 0 to 5 g, 525 g
The disposal price has been reduced! Member prices are not applicable. 2024/11/12 sales price 168,000 yen phono cable is cheap because the original box is out of stock. It is an arm that inherits the basic design of the 3012 and has increased versatility with all players through downsizing. It is also attractive that the 2-split main weight is compatible with lightweight cartridges as well as heavyweight cartridges such as SPUs. Clear and strong sound quality due to the sharp followability of the knife edge still boasts high ability (Oikawa Tetsuji)
Maintenance information: 2024.11.12 continuity confirmed
Accessories: none
Main specifications: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) needle pressure variable range 0 to 5 g
The price has been reduced. 2024/12/6 sales price 99,800 yen Full of accessories such as 3 types of weights, 2 types of subweights, 3 types of arm pipes, etc. Oil dump system with static balance. There is no impression that arms are high in recent years, and they play well-balanced music in the mid to low range with a sense of stability, and there are speckled dullness and discoloration in places (Kojima Yosuke)
Maintenance information: 2024.12.6 continuity, movable part operation confirmed
Accessories: instruction manual, 3 weights, 2 sub-weights, 3 arm pipes (1 S-shaped arm/2 straight arms), template, cartridge fixing screws, phono cable
Main specifications: static balance type, total length 333 mm, effective length 237 mm, overhang 15 mm, needle pressure adjustment 0 to 5 g (0.25 g steps), compatible cartridge, dead weight, 14 to 33 g, arm base, mounting hole diameter 40 mm
※It is inexpensive because the arm pipe attachment part is sagging. This is a carbon fiber arm type for Stax's hit tone arm UA-7, which is in stock with the original box. An inside force canceller is used, making it an easy to use arm. The exterior is dull (Yamato Yuki)
Accessories: instruction manual phono cable shell subweight position outlet pipe original box
Main specifications: Statically balanced carbon fiber arm pipe total length 340 mm overhang 13 mm needle pressure range 0 to 3 g (0.1 g steps) arm height adjustment 30 to 63 mm cartridge dead weight 2 to 16 g
This is an arm pipe for STAX UA-7. It's difficult to obtain it alone, so how about using it as a sub or stock? There is a feeling of use such as dullness over time (Yamato Yuki)
Maintenance information: 2024.12.22 continuity confirmed
Accessories: none
The price has been reduced! 2024/12/17 sales price 138,000 yen Maintained! Dynamic balance short arm The strong sound brings out the characteristics of the SPU-G shell type to the fullest. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.12.17 Maintained (broken shaft repair. Output cable RCA terminal deterioration replacement. Continuity test)
Accessories: connection cord
Main specifications: Dynamic balance type, total length: 300 mm, execution length: 228 mm, overhang: 16 mm, needle pressure range: 0 to 7.5 g, needle pressure range: 0 to 7.5 g, direct reading arm, base hole, 22 mm, cartridge dead weight: 7 to 32 g
SAEC tone arms have a reputation for their mechanical design. It has a hard ruby W knife-edge structure and features a clear, well-contoured sound. It is an arm that clearly conveys the advantages of cartridges due to its high tracing ability. On the exterior, there is oxidation and dirt on the cable. Serial 25516 (Yonejima Satoshi)
Maintenance information: 2024.12.20 continuity confirmed
Accessories: connection cord
Main specifications: double knife edge, static balance type, total length 329 mm, effective length 240 mm, cartridge usage range: 23.5 g to 33.5 g needle pressure adjustment range: 0 to 4 g, mounting hole diameter 30 mm
*Phono cable is missing. AS-212 reprinted improved model. Statically balanced short tone arm. It's simple, easy to handle, and has well-balanced sound quality. ※The phono cable is out of stock. There is a feeling of use such as dullness over time (Yamato Yuki)
Maintenance Information: 2024.12.15 Operation confirmed
Accessories: overhang gauge, hex wrench
Main specifications: total length 305 mm, effective length 228 mm, effective length: 212 mm, overhang: 23 mm, allowable cartridge weight (when normal): 18 to 28 g, needle pressure, effective operation range: 2 g to 7 g, height adjustment range: 35-63 mm
The disposal price has been reduced. Member prices are not applicable. 2024/12/1 sales price 138,000 yen*Inside Force tegs are cheap because they are self-made. It is an arm that inherits the basic design of the 3012 and has increased versatility with all players through downsizing. It is also attractive that the 2-split main weight is compatible with lightweight cartridges as well as heavyweight cartridges such as SPUs. Clear and strong sound quality due to the sharp followability of the knife edge still boasts high ability (Oikawa Tetsuji)
Maintenance information: same as 2024.12.1, operation confirmed
Accessories: instruction manual, earth cable
Main specifications: Static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), variable needle pressure range 0 to 5 g, 525 g
The price has been drastically reduced! 2024/12/10 sales price 198,000 yen A masterpiece arm made in Japan made in Japan made with a high level of stainless steel and workmanship accuracy. The clear tone that does not make you feel incidental sounds, the breadth and ease of settings, and excellent tracing ability in the dynamic balance type are excellent. (FUJISAWA KOSHI)
Maintenance Information: 2024.12.10 Operation confirmed
Accessories: phono cable (external product)
Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm
The price has been reduced! 2024/11/30 sales price 79,800 yen SAEC tone arm with a reputation for its mechanical design. It has a hard ruby W knife-edge structure and features a clear, well-contoured sound. It is an arm that clearly conveys the advantages of cartridges due to its high tracing ability. There is some dullness and dirt on the exterior. Serial 27768 (Yonejima Satoshi)
Maintenance information: 2024.11.30 Continuity confirmed
Accessories: connection cord
Main specifications: double knife edge, static balance type, total length 329 mm, effective length 240 mm, cartridge usage range: 23.5 g to 33.5 g needle pressure adjustment range: 0 to 4 g, mounting hole diameter 30 mm
Stax's popular long arm. A staple Stax arm with an attractive slim and sophisticated design. The firm, supple sound is attractive. Recommended for those who use lightweight cartridges and are looking for a long arm (Murakoshi Yoichi)
Maintenance information: 2024.12.6 continuity confirmed
Accessories: instruction manual, phono cable, armrest
Main specifications: static balance type, effective length 312 mm, needle pressure 0 to 3 g, compatible cartridge weight 2 to 16 g
Based on the idea of no resonance, it is a tone arm born from the experience of PS-X9 development, and it is an arm with a very tight structure. The cost performance is high. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.12.1 continuity confirmed
Accessories: instruction manual, weight, shell, tool, phono cable, original box
Main specifications: total length 330 mm, effective length 235 mm, needle pressure adjustment range 0 to 2.5 g