※The pedestal is missing, and the vibrating plate cover on one side is scratched. A popular Pioneer ribbon tweeter. A golden combination of beryllium diaphragms and alnico magnets. Of course, ultra-high frequency sound quality correction is expanded, and the wide sound field can be clearly experienced with classical sources (Oikawa Tetsuji)
Maintenance information: 2026.2.28 Operation confirmed
Accessories: screws, original box
Main specifications: input impedance 8 ohms playback frequency band 5,000 Hz to 120,000 Hz maximum input 100 W output sound pressure level 97.5 dB crossover frequency 5,000 Hz or more dimensions W134 x H89 x D 179 mm weight 2.6 kg
It is inexpensive because the frame is greatly bent. A model equipped with a large wave panel and a dedicated network. This is the CLT-5 value model. It is delicate and creates a sense of transparency and tightness. It is an easy-to-use unit that can be connected directly to the speaker. The exterior of the serial CLT-5S181 CLT-5S182 has curved frames and dents (Katsuji Hiura)
Maintenance information: 2026.2.26 sound output confirmed
Accessories: none
Main specifications: wave type flat panel speaker impedance 4 ohms, W162 x H170 x D 150 mm, weight 2.2 kg
The price has been drastically reduced. 2026/2/1 sales price 30,000 yen. *Currently sold. The shape of the frame is different on the left and right. Yamaha horn tweeter equipped with NS-370. If you've been looking for one, take this opportunity. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.1.25 Operation confirmed
Accessories: none
Main specifications: Onboard speaker, high frequency playback frequency band, 5 kHz to 20 kHz, 8 ohms, diameter 70 mm, total length: 85 mm, 1.0 kg
It is cheap because there is a scratch on the back. Fostex horn-shaped super tweeter. It has a built-in network circuit with an attenuator and is easy to use. The super tweeter unit uses an Alnico magnet machined from aluminum alloy to reproduce clear horn-like sounds. There is a feeling of use on the exterior, dents, large scratches on the sides, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.2.21 sound output confirmed
Accessories: none
Main specifications: impedance 8 ohms playback frequency band 7 kHz to 35 kHz output sound pressure level 102 dB built-in network 6 dB with continuously variable ATT W146 x H107 x D159 mm 1.7 kg
professional tweeter Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. The exterior is dull and has fine scratches (Wang Zhan)
Maintenance information: Sound check is OK with 2026.2.12 sweep.
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
Attached to a self-made wood cabinet, with a network! A neodymium dome tweeter that condenses know-how in high-frequency unit design. The lightweight, high-rigidity vibration system achieves a smooth response, and excels at smooth reproduction in the mid to high range. The rise of the high frequencies has no roughness or sense of emphasis, and since it naturally depicts fine nuances of harmonics, it honestly conveys the harmonics of acoustic instruments and vocals. This tweeter is suitable for those who want to smoothly connect the upper band of the system and users seeking the beauty of detailed sound (Wang Zhan)
Maintenance information: Operation confirmed during 2026.2.13 sweep
Accessories: none
Main specifications: type ribbon tweeter (horn/ribbon) impedance 7Ω rated input 12W (program 25W approximate) frequency characteristics 1100Hz to 30kHz current crossover 7000 Hz (12dB/oct) W160 x D170 x H190 mm weight approx. 1.96 kg (actual measurement)
volume, with network! It comes in a self-made cabinet. A classic tweeter used in JBL's successive speakers. Cymbals and wind instruments are vividly played back with a clear, dry sound (Wang Zhan)
Maintenance information: 2026.2.13 sound check OK with sweep
Accessories: none
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, current crossover frequency, 9000 Hz, allowable input, 20 W, W180 x D200 x H180 mm, 3.24 kg (actual measurement)
Currently sold. A super tweeter that can play up to 40kHz. I also recommend it as an introductory aircraft at an affordable price. The exterior is good with no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2026.2.17 Operation confirmed
Accessories: No accessories
Main specifications: hard dome tweeter ~ 40kHz 4Ω 86dB W80 × H79 × D64 mm 500 g
The price has been reduced. 2026/1/26 sales price 65,000 yen JBL professional tweeter. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.1.25 Operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg
The disposal price has been reduced. Member discounts are not applicable. 2026/1/15 sales price 54,800 yen It is a beautiful, unused item. A rare Sears soft dome tweeter. The sound quality is moist and soft, so you can enjoy a relaxed sound quality. (FUJISAWA KOSHI)
Maintenance information: 2026.1.12 Operation confirmed
Accessories: original box
Main specifications: 25mm soft dome tweeter playback frequency 2,000 Hz to 25,000 Hz recommended cutoff frequency: 2,000 Hz or more impedance 6 ohms sound pressure level 89 dB weight 0.36 kg
JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2026.2.7 operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg
A dome-shaped super tweeter that shines with the beauty of solid walnut wood. It is equipped with a high pass filter. It demonstrates the best performance in combination with Prestige series such as Westminster Royal and Canterbury. The exterior is dull. Serial 8000 1320110215497434 (Satoshi Yonejima)
Maintenance information: 2026.2.4 maintained (remove the joint screw and reinstall due to loose SP terminals)
Accessories: instruction manual, pedestal, plug
Main specifications: efficiency 95dB 8Ω cutoff frequency 14kHz/16kHz/18kHz cutoff frequency to 100kHz W150 x H100 x D162 mm (3-point support base included) Weight 1.2 kg per bottle (3-point support base included)
A consumer model tweeter unit that was used in the L300. Compared to the 2405 aluminum diffuser, this model of acrylic diffuser has a sweet and clear JBL sound. It is a character that blends in naturally without compromising the taste of the company's system. The exterior has paint peeling and corrosion due to aging (Oikawa Tetsuji)
Maintenance information: 2026.1.29 Operation confirmed
Accessories: none
Main specifications: Alnico magnet, 8 ohms, allowable input, 20 W, frequency characteristics, 6,500 Hz to 21,500 Hz, crossover, 6,500 Hz, sound pressure level, 105 dB, diameter: 98 mm, depth: 83 mm, 2.3 kg/unit
A frame using high specific gravity resin is used for the strong ferrite low distortion magnetic circuit. The tuning adds a sense of naturalness and transparency to add vividness to the vocals. There are no visible scratches on the exterior, etc., and it is good with just the degree of dullness (Kobayashi Hitoshi)
Maintenance information: 2026.1.25 Operation confirmed
Accessories: none
Main specifications: Playback frequency 900 Hz to 50 kHz 8 ohm 90 dB/W baffle opening diameter 93 mm screw pitch 115 mm W130 x D 90 mm 2.6 kg
※Unused item. I opened it for a photo shoot. A high-performance ribbon tweeter with an authentic design with a ribbon size of 12 x 60 mm. High efficiency of 94 dB, clear sound quality with low distortion ratio, and sharp sound with strong neodymium magnets. (FUJISAWA KOSHI)
Maintenance information: 2026.1.20 Operation confirmed
Accessories: original box
Main Specifications: Ribbon Tweeter 8Ω Playback Frequency Band 1400Hz to 40,000 Hz W69.5 x H113 x D85 mm
The price has been reduced! 2025/1/12 sales price 54,800 yen It is a beautiful, unused item. A rare Sears soft dome tweeter. The sound quality is moist and soft, so you can enjoy a relaxed sound quality. (FUJISAWA KOSHI)
Maintenance information: 2026.1.12 Operation confirmed
Accessories: original box
Main specifications: 25mm soft dome tweeter playback frequency 2,000 Hz to 25,000 Hz recommended cutoff frequency: 2,000 Hz or more impedance 6 ohms sound pressure level 89 dB weight 0.36 kg
Comes with the original box and stand, and is beautiful without feeling of use. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It stretches well and expands the high range cleanly (Oikawa Tetsuji)
Maintenance information: 2026.1.19 Operation confirmed
Accessories: pedestal, original box, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
Comes with the original box and stand, so it's a beautiful item without feeling used! FOSTEX horn tweeter This version uses an Alnico magnetic circuit and an aluminum alloy thick cylindrical horn. It is delicate yet deep, and you can experience the high frequency and sharpness that stretches well (Oikawa Tetsuji)
Maintenance information: 2026.1.19 Operation confirmed
Accessories: stand, instruction manual, original box
Main specifications: Playback frequency band 5 kHz to 40 kHz 8Ω 108 dB cutoff frequency 3.5 kHz recommended crossover frequency 6.0 kHz (-12 dB/oct) or higher W85 x H85 x D107 mm 2 kg/book
Murata Manufacturing's ceramic super tweeter improved based on ES103. The natural resonance frequency is set higher than the playback band using spherical piezoelectric ceramics, and high tracking of the diaphragm with respect to input signals is achieved. Excellent transient characteristics make it possible to reproduce sound that is both delicate and full of realism. It is compatible with a wide range of speakers, and the expansion of aftertaste and spatial expression is remarkable. You can see a feeling of use, such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.1.18 Operation confirmed
Accessories: instruction manual, carrying case, original box
Main specifications: Playback frequency band 15 kHz to 100 kHz sound pressure level 90 dB impedance 8 ohms maximum allowable input 50 W (pink noise input) diameter 65 x D110 mm weight 1.1 kg
※1 bottle only. Horn tweeter with unknown manufacturer and model number. The sound came out without distortion on the 8000 Hz network. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.12.13 Operation confirmed
Accessories: none
Main specifications: W152 x H127 x D112 mm 1.37 kg (actual measurement)
*Currently sold. A horn super tweeter equipped with a high-performance magnetic circuit using an Alnico magnet. There is a sense of transparency, and it makes you listen to sharp high frequencies in a relaxed manner. The exterior is dull, and a feeling of use can be seen (Ryo Mizusaki)
Maintenance information: 2026.1.13 sound output confirmed
Main specifications: Alnico 8 ohm 4 kHz to 33 kHz output sound pressure level 100dB/W input 50W cutoff frequency 3.9 kHz recommended crossover frequency 8 kHz or more baffle aperture diameter 61 mm weight 600 g
A classic tweeter used in JBL's successive speakers. Cymbals and wind instruments are vividly played back with a clear, dry sound. There is a lot of feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.12.20 Operation confirmed
Accessories: none
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg
Currently sold. Very easy to use FOSTEX horn tweeter. The frequency band is also wide, and you can enjoy sharp sound quality typical of a horn tweeter. There are scratches and scuffs on the front panel (Kojima Yosuke)
Accessories: none
Main specifications: horn type tweeter playback frequency 5,000 to 50,000 Hz cutoff frequency 2,600 kHz recommended crossover 5,000 Hz or more 8 ohms output sound pressure level 98.5 dB diameter 87 x H49.5 mm weight 340 g
*Currently sold. This is a rare item! Sansui's tweeter with unknown details. I tested it with a 7000 Hz crossover and it works fine. How about those in the self-made school (Oikawa Tetsuji)
Maintenance information: 2026.1.7 operation confirmed
Accessories: none
Main specifications: impedance 8 ohms diameter 92 x depth 62 mm 1.2 kg (actual measurement)
*Currently sold. This is a rare item! Sansui's tweeter with unknown details. I tested it with a 7000 Hz crossover and it works fine. How about those in the self-made school (Oikawa Tetsuji)
Maintenance information: 2026.1.7 operation confirmed
Accessories: none
Main specifications: impedance 8 ohms diameter 92 x depth 62 mm 1.2 kg (actual measurement)
This is PIONEER's classic super tweeter. Among ribbon-type tweeters, this is a gem that is highly regarded for its ease of use and good sound quality. Recommended for those who don't have enough high frequencies or want to improve the overall quality of the sound. The exterior is dull and there is surface oxidation (Yonejima Satoshi)
Maintenance information: 2026.1.4 oscillator check OK
Accessories: No accessories
Main specifications: Playback frequency band 4.5 kHz to 100 kHz impedance 8 ohms recommended crossover 4.5 kHz output sound pressure level 95 dB maximum input 40 W rated input 20 W weight 2.8 kg
This is a 1" textile soft dome tweeter used in Bang & Olufsen's Beovox series, etc. If you've been looking for one, take this opportunity. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.1.2 operation confirmed
Accessories: none
Main specifications: 8 ohm dome aperture 1 inch (approx. 25 mm) dome material: textile (cloth) allowable input 50 W playback frequency band 2,000 Hz to 22,000 Hz output sound pressure level 92 dB crossover 2,000 Hz diameter 94 mm height 30 mm (square flange) mounting hole diameter approx. 75 mm 533 g
※1 bottle only. Dayton's tweeter. It is a model with exactly the same structure as a high-class tweeter, using a 1 inch titanium diaphragm and cooling the aluminum voice coil with ferrofluid. If you are a self-made person, please give it a try. (FUJISAWA KOSHI)
Maintenance information: 2026.1.7 operation confirmed
Accessories: original box, instruction manual
Main specifications: impedance 8 ohms output 50 W efficiency 93 dB frequency band 3,000 to 20,000 Hz
The price has been reduced. 2025/12/30 sales price 15,000 yen. Comes with a self-made stand. Very easy to use FOSTEX horn tweeter. The frequency band is also wide, and you can enjoy sharp sound quality typical of a horn tweeter.
Maintenance information: 2025.12.26 sound output confirmed
Accessories: none
Main specifications: horn type tweeter playback frequency 5,000 to 50,000 Hz cutoff frequency 2,600 kHz recommended crossover 5,000 Hz or more 8 ohms output sound pressure level 98.5 dB W171 x H136 x D168 mm 0.9 kg
Pioneer's popular ribbon tweeter. Using lightweight and highly rigid beryllium diaphragms and Alnico magnets, the delicate, high-quality high range is still an attractive gem. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.1.2 operation confirmed
Accessories: base
Main specifications: ribbon tweeter with fuse protection circuit, playback frequency 5,000 Hz to 120,000 Hz 8 ohms sound pressure 97.5 dB maximum input 100 W rated input 50 W (both 5 kHz to -12 dB/when using an OCT network) W134 x H89 x D179 mm 2.6 kg