Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Network players
- Integrated amplifiers
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Cables
- Insulators
- Racks
- Parts
- Tubes
- Manual
- Audio set
- Other audio
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other records
- Other soft
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
Manufacture:JBL
Original price: JPY 226,000
Price: JPY 152,727(pair)Sold Out
- description
- The disposal price has been reduced. Member discounts are not applicable. 2026/1/18 sales price 238,000 yen*Although maintenance has been completed, the paint has been greatly peeled off, so it is cheap. The input has been changed to a large terminal compatible with banana plugs. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2026.1.16 Maintained (pad dampener, screw replacement, vibrating plate installation adjustment) Accessories: mounting screws Main specifications: 2 inch driver frequency band 500 Hz to 10 kHz crossover 500 Hz or higher sound pressure level 108 dB impedance 16 Ω (measured 24342/9.2 Ω, 26006/9.0 Ω) diameter 180 x depth 130 mm weight 11.8 kg/book DCR (20202 7.2 Ω, no vibration plate scratches, 20812 7.7 Ω vibrating plate scratches)
Manufacture:JBL
Original price: JPY 238,000
Price: JPY 63,455(pair)Sold Out
- description
- The disposal price has been reduced! (Member prices are not applicable) 2025/11/20 sales price 99,800 yen Maintained! JBL professional 2 inch screwdriver. It is an item that continues to be used today in large horn systems, etc. With the quality unique to titanium diaphragms, the vocal breathing and drum hi-hat, the outstanding realism is appealing no matter which one you take. The exterior is dull and dirty. Serial 023492/023566 (Tamura Eiji) Maintenance information: 2025.11.20 Maintained (vibration plate installation adjustment, insulation bushing replacement. Vibrating plate mounting screw replacement. Ultrasonic cleaning of terminals. Pad dampener replacement. DCR (023492/7.4Ω vibrating plate no scratch) (023566/8.2 ohm vibrating plate no scratch) Accessories: No accessories Main specifications: 2 inch driver, slot diameter: 5 cm; allowable input: 100 W; sound pressure level: 111 dB; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/bottle
Manufacture:ALTEC
Original price: JPY 280,000
Price: JPY 86,182(pair)Sold Out
- description
- The price has been reduced. 2026/1/15 sales price 99,800 yen Altec 1.5-inch ferrite driver. A clear and powerful American sound. The wide-area characteristics unique to Altech resonate comfortably while being rounded and stretched quickly. Both diaphragms have a logo. The exterior is scratched and dull, and there is a feeling of use (Satoshi Yonejima) Maintenance information: 2025.12.18 sweep check is good Accessories: No accessories Main specifications: 1.5 inch coaxial unit, 8 ohms, playback frequency band, 500 to 15,000 Hz, maximum input, 100 W, 13.8 kg
Manufacture:ALTEC
Original price: JPY 90,000
Price: JPY 34,364(pair)Sold Out
- description
- The price has been reduced. 2025/12/22 sales price 39,800 yen ※Currently sold. Since the diaphragm is not original, it is cheap. A typical Altec 1-inch driver mounted on Valencia and A7. The fact that it blows up without a ceiling is an appeal like no other. The sensitivity is also very high, and the vivid production is a first-class product. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2025.12.20 Operation confirmed Accessories: none Main specifications: frequency characteristics, 500 Hz to 20 kHz, allowable input, 30 W, impedance, 8 ohms, output, sound pressure level: 107 dB, crossover frequency: 500 Hz or more, throat diameter: 25 mm, compatible horn: 511B, 811B, diameter 114 x D83 mm, 2.6 kg
Manufacture:JBL
Original price: JPY 238,000
Price: JPY 58,909(pair)Sold Out
- description
- The disposal price has been reduced. Member prices are not applicable. 2025/10/16 sales price 89,800 yen Maintained. JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and excellent reality no matter which one you take (Oikawa Tetsuji) Maintenance information: 2025.10.16 Maintained (vibration plate installation adjustment, insulation bushing deterioration replacement vibration plate, terminal cleaning Pad dampener replacement DCR (23523 7.7 ohm vibrating plate scratch) (23567 7.9 ohm vibration plate scratch free) Accessories: none Main specifications: 2 inch driver, slot diameter: 5 cm; allowable input: 100 W; sound pressure level: 111 dB; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/bottle
Manufacture:CORAL
Original price: JPY 104,000
Price: JPY 36,182(pair)Sold Out
- description
- * Since there is no hexagon compatible with the screw, the lid cannot be opened, and the diaphragm cannot be checked, it is inexpensive and is currently sold. Coral mid-range and treble drivers are deeply popular. Please enjoy the delicate sound that is made in Japan. Also, it can be attached to a JBL 1-inch horn without using an adapter. There are small scratches overall (Oikawa Tetsuji) Maintenance information: 2025.12.28 Operation confirmed Accessories: none Main specifications: throat diameter 25.4 mm (1 inch) playback frequency band 500 to 18,000 Hz impedance 8 ohms maximum input 150 W sound pressure 105 dB W116 x H116 x D104 mm 4.2 kg
Manufacture:ALTEC
Original price: JPY 140,000
Price: JPY 81,636(pair)Sold Out
- description
- The price has been drastically reduced! 2025/12/18 sales price 99,800 yen Altec 1.5-inch ferrite driver. A clear and powerful American sound. The wide-area characteristics unique to Altech resonate comfortably while being rounded and stretched quickly. Both diaphragms have a logo. The exterior is scratched and dull, and there is a feeling of use (Yonejima Satoshi) Maintenance information: 2025.12.18 sweep check is good Accessories: No accessories Main specifications: 1.5 inch coaxial unit, 8 ohms, playback frequency band, 500 to 15,000 Hz, maximum input, 100 W, 13.8 kg
Manufacture:ALTEC
Price: JPY 331,818(pair)Sold Out
- description
- The disposal price has been reduced. Member discounts are not applicable. 2025/12/14 sales price 450,000 yen Vintage 1950s Altec driver. While it has a very strong sense of energy, it is also uniquely easy to hear. If you have an Altec system from Yonematsu's early days, please take this opportunity! You can see the exterior, paint peeling, dullness, scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2025.11.14 Maintained (the phosphor bronze plate on the outer drawer part was broken from the root → additional lead wires were soldered and connected. Distortion was confirmed in the sound output, so repair, stop the coil noise, and adjust centering) Accessories: none Main specifications: frequency characteristics 500 Hz to 12,000 Hz impedance 24 ohms sensitivity 115.2 dB allowable input 40 W recommended network N-500-C recommended crossover 500 Hz recommended horn H150/H804/1005B W165 D142 mm weight 9 kg
Manufacture:ALTEC
Original price: JPY 99,600
Price: JPY 43,455(pair)Sold Out
- description
- The price has been reduced. 2025/12/22 sales price 49,800 yen ※Currently sold. Since the age of the diaphragm is different on the left and right, it is inexpensive. Driver unit used in the ALTEC A7-8, etc. A Symbiotech diaphragm is used, and wideband playback is possible by combining it with an 811B sectional horn. A feeling of use can be seen on the exterior, dullness, rust, scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2025.12.21 Operation confirmed Accessories: none Main specifications: 1 inch impedance, 8 ohms, frequency characteristics, 800 Hz to 20 kHz, allowable input, 50 W, depth: 83 mm, approx. 2.7 kg
Manufacture:CORAL
Original price: JPY 104,000
Price: JPY 40,727(pair)Sold Out
- description
- The disposal price has been reduced. Member prices are not applicable. 2025/10/28 sales price 59,800 yen Maintained including diaphragm (16 ohms) replacement. Coral mid-range and treble drivers are deeply popular. Please enjoy the delicate sound that is made in Japan. Also, it can be attached to a JBL 1-inch horn without using an adapter. There are small scratches, paint peeling, etc. (Oikawa Tetsuji) Maintenance information: 2025.10.9 maintained (diaphragm replacement, installation adjustment, impedance matching 16 ohm DCR (9965 10.8 ohm diaphragm small scratches) (9966 10.9 ohm diaphragm small scratches) Accessories: none Main specifications: Throat diameter 25.4 mm (1 inch) playback frequency band 500 to 18,000 Hz impedance 16 ohms maximum input 150 W sound pressure 105 dB W116 x H116 x D104 mm 4.2 kg
Manufacture:ALTEC
Original price: JPY 420,000
Price: JPY 98,182(pair)Sold Out
- description
- ※There are slight dents and wrinkles on the diaphragm, so it is inexpensive. This is a 2 inch screwdriver used on late A5. The overwhelming sense of energy is attractive. The exterior has peeling paint and rust spots on screws, etc. Serial 01366/01400 (Tamura Eiji) Maintenance information: 2025.12.12 maintained (disconnection repair → phosphor bronze plate folding repair. Magnetic circuit slit anti-corrosion, complete diaphragm maintenance) Accessories: No accessories Main specifications: ferrite magnet playback frequency band 500 to 15,000 Hz recommended crossover frequency 500 Hz impedance 16 Ω output sound pressure level 112 dB 13.8 kg/book
Manufacture:ALTEC
Original price: JPY 90,000
Price: JPY 54,364(pair)Sold Out
- description
- The disposal price has been reduced! (Member prices are not applicable) 2025/10/27 sales price 79,800 yen Maintained! A typical Altec 1-inch driver mounted on Valencia and A7. The fact that it blows up without a ceiling is an appeal like no other. The sensitivity is also very high, and the vivid production is a first-class product. The exterior is dull and oxidized. Serial 07690, 11088 (Fujisawa Yukishi) Maintenance information: 2025.10.27 Maintained (vibration plate installation adjustment, operation confirmed) Accessories: No accessories Main specifications: frequency characteristics, 500 Hz to 20 kHz, allowable input, 30 W, impedance, 8 ohms, output, sound pressure level: 107 dB, crossover frequency: 500 Hz or more, throat diameter: 25 mm, compatible horn: 511B, 811B, diameter 114 x D83 mm, 2.6 kg
Manufacture:ALTEC
Price: JPY 49,818(pair)Sold Out
- description
- The price has been reduced. 2025/10/26 sales price 59,800 yen Maintained! Altec mid to high range drivers. The subtlety and expressiveness are truly ALTEC. It is a 1 inch driver that is easy to match with other manufacturers and is extremely easy to integrate. Ferrite magnet and tangerine phase plug adopted (Sasaki Shota) Maintenance information: 2025.10.26 Maintained (diaphragm installation adjustment) Accessories: none Main specifications: playback frequency band 500 to 20,000 Hz, recommended crossover, 500 Hz, impedance 16 ohms (measured 11.8 ohms/12.2 ohms), diaphragm: aluminum throat diameter 25.4 mm, weight 2.9 kg
Manufacture:YAMAHA
Original price: JPY 120,000
Price: JPY 54,364 Sold Out
- description
- Yamaha's professional series mid-range driver unit with high input resistance. The diaphragm is made of a 66mm special aluminum alloy. Also, 0.15 mm beryllium copper etched on the edge is used to prevent damage due to fatigue. The exterior has threads and is dull (Sasaki Shota) Maintenance information: 2025.11.16 Operation confirmed Accessories: none Main specifications: impedance 8 ohms, playback frequency band, 300 Hz to 12 kHz, recommended usage band, 500 Hz or more, 107 dB/Wm diaphragm, dome-shaped, aluminum alloy compatible horn, H-1230 (AD-3500 required), D-2230, outer diameter: 165 mm x height: 6.75 kg
Manufacture:JBL
Original price: JPY 332,000
Price: JPY 81,636(pair)Sold Out
- description
- ※It is inexpensive because it is in poor condition such as rust and paint peeling. Maintained! Phenol resin impregnated diaphragms are used. Below is a calming sound that can be used from 300 Hz. The exterior has paint peeling, rust, and oxidation. Serial 14307/unknown (Tamura Eiji) Maintenance information: 2025.11.13 Maintained (vibration plate installation adjustment, pad dampener and insulation bushing deterioration replacement. Replace the mounting screws. DCR (14037/10.3 ohm vibrating plate, no scratches) (serial No. unknown/8.6ohm vibrating plate scratch)) Accessories: screws Main specifications: impedance 16 ohms (measured 10.3/8.6 Ω) sound pressure level 118 dB frequency characteristics 300 Hz or more diameter 178 x depth 136 mm 11.3 kg
Manufacture:ALTEC
Original price: JPY 194,000
Price: JPY 72,545(pair)Sold Out
- description
- The disposal price has been reduced. Member discounts are not applicable. 2025/9/25 sales price 99,800 yen Altec green 1 inch driver 806A. It is a driver installed on famous aircraft such as Flamenco and Valencia. You can enjoy the extended mid-high range by combining it with the 811 horn and 511 horn. There is a feeling of use such as a small dent on one side of the diaphragm, paint peeling, etc. Serial 7387/7020 (Takasaki Atsushi) Maintenance information: 2025.9.25 sound output confirmed Accessories: none Main specifications: Playback frequency band 500 to 20,000 Hz 16 ohms output sound pressure level 105 dB 2.68 kg/piece
Manufacture:JBL
Original price: JPY 114,000
Price: JPY 54,364(pair)Sold Out
- description
- The price has been drastically reduced. 2025/5/2 sales price 69,800 yen Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are attractive for slight input (Wang Zhan) Maintenance information: 2025.5.2 maintained (vibration plate installation adjustment, pad dampener and mounting screws replaced. Insulating bushing replacement. Dispensing terminal contact part cleaning, vibration plate terminal contact part cleaning) Accessories: none Main specifications: 1 inch driver 500 to 20,000 Hz 8 ohms (DCR 40757/5.7 ohm 46314/5.8 ohm) W145 x D97 mm 5.1 kg/book
Manufacture:Electro Voice
Price: JPY 22,727(pair)Sold Out
- description
- The price has been reduced. 2025/10/28 sales price 30,000 yen*Currently sold. Electro-Voice 1" Screwdriver It is compatible with the company's ADH-1, etc. There are many scratches and stains (Oikawa Tetsuji) Maintenance information: 2025.10.28 Operation confirmed Accessories: none Main specifications: Playback frequency band 500 to 20,000 Hz, recommended crossover, 800 Hz, 8 ohms, 114 dB, diameter: 155 mm x depth: 99 mm, 4.8 kg (actual measurement)
Manufacture:JBL
Original price: JPY 238,000
Price: JPY 68,000(pair)Sold Out
- description
- The disposal price has been reduced. Member discounts are not applicable. 2025/7/24 sales price 99,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. There is dullness and partial paint peeling. Serial 82979/78248 (Kanai Hidetsugu) Maintenance information: 2025.7.24 maintained (diaphragm installation adjustment pad dampener replacement, terminal ultrasonic cleaning DCR (82979 7.7 ohm diaphragm scratch, 78248 8.oohm diaphragm scratch not) Accessories: Throat mounting screws Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
Manufacture:JBL
Original price: JPY 146,200
Price: JPY 90,727(pair)Sold Out
- description
- Maintained! A popular set of LE175 and HL87. An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a small paint chip on the exterior, and there is a small scratch on the diaphragm (Takahashi Nobuyuki) Maintenance information: vibration plate installation adjustment, pad dampener and insulation bushing deterioration replacement mounting screws rust replacement vibration plate stain cleaning DCR (37839 6.2 ohm vibrating plate without scratches) (37947 6.3 ohm vibrating plate small scratches) Accessories: none Main specifications: LE175 1 inch driver impedance 8 ohm crossover 500 Hz 108 dB diameter 114 x 98 mm weight 4.1 kg HL87 2 kg for 1 inch crossover frequency 1200 Hz or more directivity 60° (cone) honeycomb W145 x H145 x D 173 mm
Manufacture:JBL
Original price: JPY 380,000
Price: JPY 90,727(pair)Sold Out
- description
- The disposal price has been reduced! Member discounts are not applicable. 2025/10/16 sales price 158,000 yen Maintained. A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. There is a small scratch on one side of the diaphragm (Oikawa Tetsuji) Maintenance information: 2025.10.16 Maintained (vibration plate installation adjustment, pad dampener deterioration replacement, mounting screw rust, replacement insulation bushing, deterioration replacement terminal part, vibration plate dirt cleaning DCR (25960 7.6ohm vibrating plate small scratch ant) (25874 7.6ohm vibrating plate scratch pear) Accessories: none Main specifications: frequency characteristics 500 to 18 kHz crossover 500 Hz 16 ohm actual measurement 8.5 ohm/8.1 ohm diameter 175 mm height 145 mm approx. 11.8 kg/bottle
Manufacture:JBL
Original price: JPY 240,000
Price: JPY 90,727(pair)Sold Out
- description
- The disposal price has been reduced! (Member prices are not applicable) 2025/10/11 sales price 158,000 yen ※The exterior is not good, but the diaphragm is relatively clean. Maintained! 2 inch throat driver 375 professional specifications Like the 375, this is a driver where you can fully enjoy the thick mid-range with rolled edges. In addition to small scratches on the diaphragm, there is a feeling of use such as scratches and dullness. Serial 21866/21866 (Jun Tamai) Maintenance information: 2025.10.11 maintained (vibrating plate disconnection replacement and installation adjustment pad dampener mounting screw rust replacement terminal contact part cleaning insulation bushing deterioration replacement DCR 21861 8.4 ohm vibrating plate small scratch ant 20606 8.6ohm vibrating plate small scratch ant) Accessories: none Main specifications: 2 inch driver, Alnico magnet, 16 ohms, 500 Hz to 18,000 Hz, recommended crossover frequency: 500 Hz, diameter: 178 x depth: 137 mm, weight: 11.3 kg
Manufacture:ALTEC
Original price: JPY 420,000
Price: JPY 90,727(pair)Sold Out
- description
- The disposal price has been reduced. Member prices are not applicable. 2025/10/15 sales price 128,000 yen Maintained! * The body description is 288-8K, but the 16 ohm seal is attached, and the measured DCR is 13.2/12.4 ohms, so it seems that the diaphragm has been changed to 16 ohms. A 2 inch driver used in A5 systems, etc. A highly cost-effective gem with a full sense of density and volume in the midrange that cannot be experienced with a 1-inch driver. It is also recommended as an introduction to 2-inch drivers. There are seal marks, dullness, scratches, paint discoloration, etc. (Oikawa Tetsuji) Maintenance information: 2025.10.15 maintained (vibration plate installation adjustment, one-side equalizer partial adhesive repair terminal bushing replacement terminal, vibration plate cleaning) Accessories: none Main specifications: 2 inch driver ferrite magnet voice coil diameter 2.8 inch impedance 13.2/12.4 Ω (measured) output sound pressure level 111 dB/w/m frequency band 500 Hz to 15,000 Hz maximum input 15 W 40 W (peak) recommended horn MR94/MR64 size 193 φ×D147 mm weight 13.8 kg recommended network N500F
Manufacture:CORAL
Original price: JPY 104,000
Price: JPY 54,364(pair)Sold Out
- description
- Maintained! Coral mid-range and treble drivers are deeply popular. Please enjoy the delicate sound that is made in Japan. Also, it can be attached to a JBL 1-inch horn without using an adapter. There are scratches and paint peeling (Sasaki Shota) Maintenance information: 2025.10.18 Maintained (vibration plate replacement adjustment pad dampener replacement. Screw rust replacement) Accessories: none Main specifications: Throat diameter 25.4 mm (1 inch) playback frequency band 500 to 18,000 Hz impedance 8 ohms maximum input 150 W sound pressure 105 dB W116 x H116 x D104 mm 4.2 kg
Manufacture:JBL
Price: JPY 72,545(pair)Sold Out
- description
- The price has been drastically reduced! 2025/9/26 sales price 89,800 yen 2435 HPL, which is rare in Japan, has arrived. It seems to be the equivalent of the 435Be used in the S9800. A beryllium diaphragm is used. It is a driver that reproduces high-speed sound images and a rich sense of sound field. Serial 42U-JBF, 42V-JBF (Fujisawa Yukishi) Maintenance information: 2025.9.26 operation confirmed Accessories: No accessories Main specifications: 75mm diameter pure berylum compression driver impedance 8Ω playback frequency band 500Hz to 15kHz output sound pressure level 110dB recommended crossover frequency 800Hz outer diameter 110mm x depth 60mm
Manufacture:ALTEC
Original price: JPY 138,000
Price: JPY 86,182(pair)Sold Out
- description
- The price has been reduced. 2025/10/6 sales price 99,800 yen Driver unit used for A7 etc. Wideband playback is possible by combining it with a 511B horn and an 811B horn. If you are aiming for a clear and firm sound, this is a model you can't miss. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2025.10.5 operation confirmed Accessories: none Main specifications: Playback frequency band 500 to 20 kHz impedance 8 ohms crossover frequency 500 Hz sound pressure level 110 dB weight 3.2 kg
Manufacture:ALTEC
Original price: JPY 420,000
Price: JPY 116,364(pair)Sold Out
- description
- Although it is expressed as 32 ohms, it seems that the diaphragm contains a 16K one. In addition to the overwhelming energy, the plumpness typical of late ferrite models is also attractive. There are scratches, seal marks, etc. (Daiki Goto) Maintenance information: 2025.10.9 operation confirmed Accessories: none Main specifications: 32 ohms (01027 side 25.5 ohm actual measurement/01072 side 26 Ω actual measurement) ferrite magnet playback frequency band 500 to 15,000 Hz recommended crossover frequency 500 Hz output sound pressure level 112 dB 13.8 kg/book
Manufacture:ALTEC
Original price: JPY 210,000
Price: JPY 54,364(only one piece)Sold Out
- description
- ※1 bottle only. Although it is expressed as 32 ohms, it seems that the diaphragm contains a 16K one. In addition to the overwhelming sense of energy, the plumpness typical of late ferrite models is also attractive. There are scratches, seal marks, etc. (Oikawa Tetsuji) Maintenance information: 2025.10.9 operation confirmed Accessories: none Main specifications: 32 ohms (measured 13 ohms) ferrite magnet playback frequency band 500 to 15,000 Hz recommended crossover frequency 500 Hz output sound pressure level 112 dB 13.8 kg/book
Manufacture:JBL
Original price: JPY 135,000
Price: JPY 58,909(pair)Sold Out
- description
- The price has been reduced. 2025/4/17 sales price 69,800 yen 2021 maintenance completed. An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, the sound is natural and has a sense of depth (Daiki Goto) Maintenance information: 2021.11.2 Maintained (diaphragm installation adjustment. Insulating washers, screws, and pad dampeners replaced. DCR (15295/6.2 ohm diaphragm undamaged) DCR (15304/6.2 ohm diaphragm undamaged) Accessories: none Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
Manufacture:ALTEC
Original price: JPY 195,000
Price: JPY 27,091(only one piece)Sold Out
- description
- ※1 bottle only. A 2 inch driver used in A5 systems, etc. Although it is an 8 ohm specification, the actual measurement is 18.4 ohms. A highly cost-effective gem with a full sense of density and volume in the midrange that cannot be experienced with a 1-inch driver. It is also recommended as an introduction to 2-inch drivers. There is a feeling of use on the exterior, such as paint peeling and sticker marks (Mizusaki Ryo) Maintenance information: 2025.10.5 sound output confirmed Accessories: none Main specifications: 2 inch driver ferrite magnet voice coil diameter 2.8 inch impedance 18.4 Ω (measured) output sound pressure level 111 dB/w/m frequency band 500 Hz to 15,000 Hz maximum input 15 W 40 W (peak) recommended horn MR94/MR64 size 193 φ×D147 mm weight 13.8 kg recommended network N500F
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
