Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Network players
- Integrated amplifiers
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Cables
- Insulators
- Racks
- Parts
- Tubes
- Manual
- Audio set
- Other audio
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other records
- Other soft
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- Maintained by the manufacturer in 2014. It is an open reel deck that is easy to handle and has excellent functionality and sound quality. The TEAC sound is clear and has good visibility, but the thickness is just right, so you can fully enjoy the analog feel. In addition to corrosion and paint deterioration on the exterior and plating part, characters disappear on part of the meter, there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi) Maintenance information: 2014.10.28 manufacturer maintenance completed (mechanical parts replacement, mechanical ASSY disassembly/cleaning/lubrication, implementation of each SW/VR, and jack contact correction, and other parts cleaning/inspection/adjustment) Accessories: No. 10 clamper Main specifications: 4 tracks, 2 channels, 6 heads (recording x 2, playback x 2, erase x 2), maximum use reel No. 10 tape speed 19/9.5 cm/sec W432 x H440 x D210 mm 20.0 kg
- description
- The price has been drastically reduced! 2023/12/17 sales price 198,000 yen Maintained. It is equipped with excellent mechanisms such as DBx and EE tape compatibility, and it is still a highly popular car. Compared to other models, the relatively high frequencies extend cleanly, and the sound quality has a strong core without becoming too soft. Of course, the tone is thick and has a calm finish. The exterior has rust, dullness, etc. appropriate for the model year (Oikawa Tetsuji) Maintenance information: 2023.12.17 Maintained (1) Clean dirt on the panel and replace due to power cord deterioration 2) Capstan motor drive power supply circuit control transistor (x2) and diode replacement (x1) 3) Flywheel cleaning, shaft oil application, and capstan belt replacement 4) Disassembly and cleaning of the pinch roller drive mechanism, grease application and pinch roller shaft oil application, pinch roller inspection and cleaning, left and right tension arm part release cleaning treatment, arm cushion replacement (x2) 5) Key operation panel tact switch replacement (x15) and REC mode display LED replacement (x1) 6) Disassembly and repair of the reel size changeover switch and speed changeover switch (due to damage to the switch) 7) Contact cleaning by detaching pitch control volume and switch, contact cleaning by detaching the REV/FWD mode changeover switch 8) Microcomputer circuit reset IC inspection and cleaning, connector check, and additional solder treatment 9) Winding tension adjustment during reel motor play (50g ± 10g), left reel stand height adjustment 10) Playback amplifier recording amplifier defect check and repair (contact cleaning by detaching the recording and playback switching multiple switch), capacitor inspection, playback level check adjustment, recording level check, recording bias check adjustment 11) Power supply unit 3 terminal regulator start prevention electrolyte capacitor replacement (x5), bias oscillator circuit part electrolytic capacitor replacement (x3) 12) Internal contact cleaning process by detaching and disassembling DBX switches, REC mode switches, TAPE selector switches, and TAPE monitor switches 13) Excellent timer operation test (PLAY operation and recording operation), good repeat sensing operation test 14) In addition, W&F (WTD) during self-recording and playback: 0.03% (however, 19cm/s), sound output test using the music source is good) Accessories: instruction manual Main specifications: 4 tracks, 2 channels, 6 head reels, 26 type, 17 type tape speed 19cm/s, 9.5cm/s frequency characteristics 19cm/s: 30Hz to 34kHz 9.5 cm/s: 30Hz to 24kHz headphones 8Ω power consumption 88W W432 x H452 x D262 mm 22 kg
- description
- A total of 134 deteriorated electrolytic capacitors have been replaced, and all other deteriorated parts have been reviewed and refreshed!! This is the pinnacle of open decks bringing together technics techniques that have been revived at enormous cost. The thickness and sharpness of the sound are completely different! Auto reverse open reel deck with a unique symmetrical head configuration. The symmetrical mechanism is utilized to ensure the same characteristics for both forward and reverse turns. Highly accurate round trip recording and playback is possible (Sasaki Shota) Maintenance information: 2023.11.4 maintained (capstan shaft cleaning, pinch roller drive mechanical grease and oil application, pinch roller cleaning and pinch roller shaft oil application, pinch roller adhesion deterioration correction, tension arm cleaning, and rust removal. Power cord replacement. Brake pad replacement and brake adjustment, counter belt replacement 2, counter mechanism disassembly and cleaning, counter character disappearance, partial handwriting correction, tension arm shutoff detection micro switch replacement x 2. Head block cleaning and tape guide cleaning, head azimuth angle adjustment. Replace partially deteriorated electrolytic capacitors in the power supply unit, key input control circuit, reel motor control circuit, and capstan motor control circuit. Reel motor torque adjustment, capstan motor PLL lock timing adjustment, TAKEUP and BACK tension adjustment during PLAY. Replace part of the electrolytic capacitor in the amplifier circuit board, adjust the playback level and playback equalizer, adjust the recording bias, and adjust the recording level. MONITOR SW/TAPE SELECTOR SW/REC MODE Contact cleaning by SW detachment/disassembly, pitch control switch and volume cleaning, speed changeover switch, auto reverse switch, timer switch detachment/disassembly cleaning. MIC volume/LINE volume/output volume contact cleaning treatment 9) Meter lamp replacement x 2, operation switch lamp replacement x 4, PLAY, FF, REW, STOP key contact disassembly cleaning treatment. Other self-recording and playback W&F (WTD): 0.02% (19 cm/s) (depending on the tape used), residual noise: −50 dB during self-recording and playback (however, at an OUTPUT volume scale of 8, it also depends on the tape used). (Auto reverse operation and timer operation confirmed, self-recording and playback tests with music sources are good) Accessories: none Main specifications: 4-track 2-channel tape speed 38/19/9.5 cm/sec automatic reversal tape position detection mechanism using timer recording and playback light detection method (transparent tape) W492 x H443 x D257 mm 26.5 kgW492 x H443 x D257 mm Weight approx. 26.5 kg
- description
- The price has been drastically reduced. 2023/7/18 sales price 198,000 yen The whole body has been thoroughly maintained, with thorough attention to everything from head polishing adjustments to disassembling and cleaning the pinch roller drive mechanism! It is equipped with excellent mechanisms such as DBX and EE tape support, and it is one that still boasts high popularity. Compared to other models, the relatively high frequencies extend beautifully, and the sound quality is firm and core without becoming too soft. Of course, it has a thick, solid tone, and is finished with a calm sound. There is a feeling of use, such as scratches, dullness, etc. appropriate for the model year. Serial 6150 (Murakoshi Yoichi) Maintenance information: 2023.7.16 maintenance (pinch roller drive mechanism disassembly, cleaning and grease up, oil application procedures. Pinch roller shaft cleaning, oil application, roller condition check, cleaning treatment. Capstan belt replacement, flywheel shaft cleaning, oil application, capstan motor internal inspection cleaning, motor speed check. Tension arm cleaning, oil application, tension arm cushion replacement. Playback and recording head surface polishing correction treatment. Adjust the playback level and recording level to the specified values. Cleaning treatment for each operation volume, contact cleaning by detaching and disassembling DBX, REC, TAPE selectors, MONITOR, and speed changeover switches. MUTE, recording changeover relay replacement Reel drive torque check adjustment (PLAT_TAKEUP; 50 g ± 10 g, FF torque; 110 g ± 10 g). Recording/Playback, DBX Recording/Playback Test Good, TIME Operation Test Confirmed, Auto Reverse Test Confirmed.) Accessories: clamper, instruction manual (copy) Main specifications: 4 tracks, 2 channels, 6 head reel, type 26, type 17, tape speed 19 cm/s, 19 cm/s: 30 Hz to 34 kHz 9.5 cm/s: 30 Hz to 24 kHz headphone 8 ohms, power consumption 88 W W432 x H452 x D262 mm 22 kg
- description
- Maintained! This is the X-2000R, the highest model in the X series. It boasts performance that surpasses the X-1000R, such as the CA (cobalt amorphous) head and newly designed equalizer amplifier, etc., and you can hear damped sound with little noise due to the DBX installation. ※No clampers. There is a feeling of use, such as paint peeling off the switch slightly and white stains on the power cord. Serial 315084 (Takasaki Atsushi) Maintenance information: 2023.7.8 Maintained (pinch roller drive mechanism disassembly cleaning and oil application, pinch roller shaft cleaning and oil application. Capstan belt replacement and flywheel shaft cleaning and oil application, pinch roller shaft cleaning and roller check and cleaning treatment. PLAY operation key knob detachment repair treatment. Right reel motor internal cleaning repair and drive current control circuit part repair (transistor replacement, resistor replacement). Tension arm shaft cleaning, guide roller part cleaning, oil application, and tension arm joint replacement. Contact point cleaning treatment for FWD, REV playback and recording circuit switching operation switches and slide switches. Operation volume contact cleaning treatment. Head azimuth angle check and adjustment, FWD/REV playback level and recording level, recording bias check and adjustment, capstan motor speed check adjustment (within ± 0.5%). (Other than that, connector terminal solder reinforcement treatment, timer operation, DBX recording and playback operation tests are excellent.) Accessories: manual copy ※ no clamper Main specifications: 4 track, 2 channel stereo format W432 x H456 x D268 mm 21.0 kg
- description
- Disposal prices have been reduced! (Member discounts are not applicable) 2023/5/16 Sales price 198,000 yen Current sales item! 60Hz specification (can be changed to 50Hz specification) Akai's 4-track open reel deck with reverse. The sharp electronic control logic operates comfortably. You can re-record with thick, clear sound quality. The meter lamp shines when the power is turned on. Overall, the exterior has small scratches, dullness, etc., and a feeling of wear over time. Serial 60410-12357 (Asaine Tomonori) Maintenance Information: 2023.5.16 Operation confirmed Accessories: instruction manual copy clamper dust cover Main specifications: 4 tracks 2 channels reversible tape speed 19/9.5 cm/sec frequency characteristics 30 to 25,000 Hz tape selector 2 stage switching (wide range/low noise) W440 x H483 x D256mm 21 kg
- description
- The price has been reduced. 2023/5/15 sales price 150,000 yen I was able to record and play back with a simple test. Clampers are missing. The OUTPUT VOL knob is broken, but it is currently sold. 60Hz specification. 4-track open reel deck with Akai reverse. It is equipped with the company's proud GX head with a special glass coating applied to the ferrite head. The sharp electronic control logic operates comfortably. You can record again with thick, clear sound quality. There is a strong feeling of use such as dullness and dirt (Murakoshi Yoichi) Maintenance information: 2023.5.9 operation confirmed Accessories: none Main Specifications: 4 Track 2 Channel Reversible Tape Speed 19/9.5 cm/sec Frequency Characteristics 30 to 25,000 Hz Tape Selector 2 Stage Switching (Wide Range/Low Noise) W440 x H483 x D256 mm 21 kg
- description
- Disposal prices have been reduced! (Member discounts are not applicable) 2023/3/9 sales price 198,000 yen Compatible with various uses from 2 track 19/38 cm re-recording to 4 track 19/9.5 cm playback. A popular model that uses Technics's unique isolated loop system. Stable driving performance is achieved with unique mechanisms such as single capstan and double pinch rollers. The rich sound that is satisfying to listen to is unique to open decks. The exterior has rust, bumps, and scratches. Serial RF707635 (Tamura Eiji) Maintenance information: 2023.3.9 Maintained (counter mechanism disassembled, shaft oil applied and intermediate pulley shaft oil applied. The two capstan motor control circuit capacitors were replaced, and the contacts were cleaned by adjusting the PLL timing and detaching and disassembling the speed changeover switch. Head tilt (azimuth) is adjusted, playback level checks, recording bias LH (1), LH (2), LH (3) readjustment, recording level adjustment, and recording and playback tests using various tapes are good. LINE REC Level Adjustment Volume Cleaning Treatment and Oil Application) 2020.10.21 Maintained (AC plug replaced. Brake pad replacement/adjustment. The left tension arm detector microswitch was replaced due to poor contact. Capstan motor lock timing readjusted.) Head dirt and cleaning treatment around the pinch roller) 2018.12.5 maintenance completed (· head height regulation, head azimuth adjustment. Semi-fixed VR is replaced, and playback levels and frequency characteristics are checked and adjusted using reference tape. Print pattern repair procedure. headphone jack cleaning procedure. Playback level regulation adjustment/recording level regulation adjustment. (Brake adjustment treatment by making and replacing brake pads) Accessories: copy of instruction manual Main specifications: 2 tracks, 2 channels (recording/playback), 4 tracks, 2 channels (playback), maximum use reel 10, tape speed/9.5/19/38 cm, isolated loop mechanism, capstan direct drive by quartz PLL system, W456 x H443 x D257 mm, 23 kg
- description
- Maintained! Equipped with excellent mechanisms such as DBX and EE tape compatibility, it is one that still boasts high popularity. Compared to other models, the relatively high frequencies are stretched cleanly, and the sound quality is firm and solid without being too soft. Of course, the sound is thick, and the sound is calm. There is a feeling of use such as scattered scratches and dullness. It comes with a cover, but the tape marks and the claw that caught it are broken on one side. Serial 10898 (Takasaki Atsushi) Maintenance information: 2023.3.5 Maintained (capstan belt replacement, flywheel cleaning and bearing cleaning grease applied, capstan shaft cleaning oil applied. Pinch roller drive mechanism grease removal and cleaning oil application, pinch roller shaft cleaning and oil application. Tension arm and impedance roller detachment cleaning and oil application. Detach the REV and FWD multiple changeover switches and disassemble for cleaning. Playback equalizer section, recording amplifier section electrolytic capacitor inspection check. Power supply unit anti-oscillation electrolytic capacitor 1uF/50V replacement (x3). SW disassembly and cleaning due to defective contacts on the DBX changeover switch and tape monitor switch. Volume cleaning procedure, input terminal cleaning, and solder deterioration addition treatment. Adjust the head angle, check and adjust the playback level and recording level. The recording and playback test for the music source is good. Auto reverse operation confirmed. (Timer play and confirm recording operation.) Accessories: clamper, cover Main specifications: 4 tracks, 2 channels, 6 head reel, 26 type, 17 tape speed 19 cm/s, 9.5 cm/s frequency characteristics 19 cm/s: 30 Hz to 34 kHz 9.5 cm/s: 30 Hz to 24 kHz headphone 8 ohms power consumption 88 W 432 x H452 x D262 mm 22 kg
- description
- Restored product that replaced 28 internal deteriorated electrolytic capacitors, etc.! It is a model equipped with DBX Type1 on the famous GX-747. It is also equipped with an auto reverse function that allows you to specify the reverse position in seconds, making it one that will go down in history in terms of both functionality and sound quality. The core and taut tone have an excellent balance. There are small scratches and dullness on the exterior ※It is currently set to 60 Hz, so when using it in the 50 Hz region, please switch the internal cycle change slide switch to the 50 Hz side before use (Sasaki Shota) Maintenance information: 2022.12.31 Maintained (pinch roller drive mechanical cleaning and grease up, tension arm partial disassembly cleaning and oil application. Auto reverse contact part contact resistance measurement repair. Regeneration equalizer unit repair (6 resistors replaced) regeneration characteristics check adjustment. Recording amplifier condenser and relay replacement, multiple switch detachments, disassembly and repair. Playback equalizer amplifier, Line amplifier, MIC input amplifier, recording equalizer amplifier section electrolytic capacitor replacement (28 pieces), print pattern damage correction treatment. Additional soldering treatment. Head tilt check and adjust playback level and recording level (bias trap, recording equalizer adjustment, recording bias adjustment). This unit is adjusted based on 200 nwb/m. When the level meter is displayed at 0 VU, the maximum front output volume is -5 dB (approx. 440 mV) as LINE output. DBX circuit section comprehensive adjustment and board cleaning procedure. Excellent recording and playback operation and sensory checks using the music source. I have confirmed that the auto reverse works properly. LINE volume cleaning, pitch control VR cleaning, tape spade adjustment, semi-fixed VR replacement adjustment. Reference value Self-Recording/Playback W&F (WTD): 0.035% (However, 19cm/s, depends on the tape used. Residual noise during blank tape playback: -53 dB (linear measurement, however) is excellent. Primary current during PLAY: 0.6 A (approx. 60 W power consumption) checked) Accessories: manual copy Main specifications: 4 track tape speed 19 cm/sec, 9.5 cm/sec dimensions W440 x H493 x D256 mm weight 23.2 kg
- description
- Maintained. 4 track, 2 channel, 19/38 cm specification, the technology from that time was generously introduced to improve performance, make it possible to push out low frequencies and clear sound quality, and you can also feel the analog feel. Please enjoy the model that enables high-quality recording and re-recording unique to Lvox. There is a feeling of use on the exterior due to dirt, rust, small scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2022.12.14 maintained (motor drive block capacitor replacement 3 pieces, reel motor drive logic circuit repair, counter mechanism cleaning and belt replacement, 50 deteriorated electrolytic capacitors and 17 semi-fixed volume exchanges, capstan motor speed adjustment and running speed confirmation with test tape, mother board selector switch pattern and slide multiple switch contacts Cleaning, input level volume, headphone volume, LINEOUT volume contact cleaning, headphone relay contact detachment cleaning, head azimuth angle adjustment, playback level and recording level and recording bias adjustment, and playback level are adjusted 257 nWB/m as 0 VU. The level of LINE OUT at 0VU is 0.775V at 0DM. The peak indicator on this unit is adjusted so that it lights up at +6 dB. Good recording and playback tests and MIC amplifier tests. 10-inch reel adapter repair, self-recording and playback W&F (WTD) 0.02%, residual noise erased during normal tape recording - 48dB (linear measurement)) Accessories: 2 clampers, empty reel Main specifications: W452 x H414 x D207 mm 17 kg
- description
- It was maintained by TEAC in 2015. 4 tiger 2CH open deck. Comes with a #10 reel adapter. Currently, there is a gully in the LINE level knob, but there were no problems with recording and playback, and it played back well. Since maintenance is currently not possible, sales will be made as is without warranty (Fujisawa Yukishi) Maintenance Information: 2015.4.15 Manufacturer Maintained (Capstan Motor Replacement. The following other parts have been replaced. Capstan belt, semi-fixed resistor 100KB) Accessories: copy of instruction manual, clampers Main specifications: 4 tracks, 2 channels, 6 heads (recording x 2, playback x 2, erasing x 2) maximum usage reel 10 tape speed 19/9.5 cm/sec W432 x H440 x D210 mm 20.0 kg
- description
- The price has been drastically reduced! 2022 10/26 selling price 178,000 yen with 10 inch reel clamper! Maintained! It is equipped with excellent mechanisms such as DBX and EE tape compatible, and it is one that still boasts high popularity. Compared to other models, the high frequencies extend relatively cleanly, and the sound quality is firm without being too soft. Of course, the sound is thick and firm, and the sound is calm. Small injuries and dark spots over time can be seen (Fujisawa Yukishi) Maintenance Information: 2022.10.26 Maintained (left and right pinch rollers and roller caps attached, tape path check and adjustment. Fly wheel, capstan shaft, and pinch roller shaft cleaning and oil application. Right reel stand height adjustment, LR tension roller and sensor cleaning and oil application, tension arm movement replacement, left impedance roller internal spring deformation and abnormal noise repair. Power supply unit +15V circuit electrolytic capacitor replacement and microcomputer circuit reset IC cleaning procedure. Tape running check, head tilt adjustment and playback level adjustment, recording level adjustment, dbx encoder, decoder level check and adjustment procedure, head block detachable cleaning treatment have been performed. Replacement procedure for replacement of RCA input and output terminals due to deterioration of RCA input and output terminals. Replacement installation procedure for missing legs on the bottom of the main unit. Recording/Playback Amplifier Board Multiple Slide Switch Detachable Disassembly Contact Cleaning Procedure, DBXOnOff Switch Disassembly Cleaning Procedure, Tape Speed Check Adjustment Other than that, the recording and playback test is good. (Auto reverse operation normal, timer operation test normal.) Accessories: 10" reel clamper Main specifications: 4 tracks, 2 channels, 6 head reels, type 26, type 17 tape speed 19 cm/s, 9.5 cm/s, frequency characteristics 19 cm/s: 30 Hz to 34 kHz 9.5 cm/s: 30 Hz 24kHz headphones 8Ω power consumption 88W W432 x H452 x D262 mm weight 22 kg
- description
- Maintained! It is a model equipped with DBXType1 on the famous GX-747. It is also equipped with an auto reverse function that allows you to specify the reverse position in seconds, and it is one that remains in history in terms of both function and sound quality. The balance between the core and the taut tone is excellent. The exterior has small scratches and dullness (Sasaki Shota) Maintenance Information: 2022.10.7 Maintained (MUT relay drive circuit repaired due to unsoldering. Tension arm oil was applied, capstan motor shaft oil was applied, and the tape running speed was adjusted within the specified deviation (1000 Hz ± 0.8%). It has also been checked on 3000Hz standard tape. Playback head and recording head azimuth angles have been adjusted, and playback level and recording level have been adjusted to standard values. If you set the LINE output volume to the maximum with the 0VU instruction at 1kHz200nWB/m at a playback level of 1kHz200nWB/m, it will be -5.5 dB (approx. 400 mV). If you set the LINE output volume scale to 5, the level will drop by about 6 dB, so the LINE output will be about 200mV. Please refer to the level above and set it to a level that is easy to use. Power cord replacement. Power ON timer operation circuit (microcomputer circuit) repair procedure due to a broken pattern, repair due to damage to the same circuit connector attachment solderland. Auto reverse operation has been confirmed (normal operation has been checked for both playback and recording) The dbx switch has been disassembled and repaired, and the dbx level setting has been performed, and the recording and playback operation test is good. Reference value: W&F (WTD) 0.04% (19cm/s) However, during self-recording and playback, it also depends on the tape used) Accessories: manual copy Main specifications: 4 track tape speed 19cm/sec, 9.5cm/sec dimensions W440 x H493 x D256 mm weight 23.2 kg
- description
- Maintained! Open deck dedicated to reel 7. It is a product with an ingenious design that keeps the size to a minimum. The tape position also has a mechanism called lambda loading that runs in the shape of a. You can experience thick sound that you can never enjoy digitally. The exterior has dullness and small scratches over time. Serial 60810-16049 (Miura Kimiya) Maintenance Information: 2022.9.23 Maintained (Capstan Motor Internal Coil Rewinding Repair Procedure (Due to Difficulty Obtaining Replacement Parts), Capstan Belt Replacement, Flywheel Axle Cleaning Oil application, fine adjustment of flywheel thrust Tape loading mechanism part spring hook repair It has been confirmed that 700gr of loading tension crimping force is secured. Bias oscillator circuit electrolytic capacitor replacement, board cleaning, FWD/REV circuit switching multiple slide switch contact disassembly cleaning treatment, recording level variable volume contact cleaning, headphones Level variable volume contact cleaning, monitor switch, tape selector switch disassembly cleaning, tape speed changeover switch disassembly cleaning, headphone jack cleaning procedure Head cleaning, head angle adjustment, playback level, recording level check adjustment, level meter indicator value check (200nwb/m) 0 dB is indicated during playback. At this time, when the OUT PUT volume is set to the maximum, LINE output is 0.775V. If you set the output volume to scale 5, it will drop by about 6 dB. The level at this time is about 380 mV. Pinch roller shaft cleaning and oil application, tape guide removal for dirt fixation. Back tension check adjustment during play, fast forward rewind status check. Tape speed check adjustment (within ± 0.3% for 3kHz standard tape), timer recording and playback operation confirmed. (Good recording and playback test with music source) Accessories: instruction manual Main specifications: reverse recording, reopened deck, 4 tracks, 2 channels, size W440 x H244 x D227 mm, weight 17.0 kg
- description
- Maintenance has been completed! Open deck dedicated to reel 7. It is a product that keeps the minimum size with an ingenious design. The tape position is also a mechanism called λ loading that runs in the shape of λ. You can experience a thick sound that you can never taste digitally. The exterior has blue rust on thread scratches and some SW. The front cover is out of stock. Serial 61210-12179 (Eiji Tamura) Maintenance Information: 2022.8.17 Maintained (Replaced due to motor power system+19V line power fuse blown. Replacement due to capstan belt deterioration, fly wheel detachment cleaning, oil application to fly wheel shaft part, tape running speed adjustment. Pinch roller inspection & cleaning & pinch roller shaft cleaning-lubricating treatment. Tape-loading detection switch contact cleaning and spring hook damaged part repair repair Partial replacement of electrolytic capacitors (bias oscillation circuit part electrolytic capacitor, +19V line electrolytic capacitor). FWD/REV switching multiple slide switch detachment contact cleaning treatment. Volume contact cleaning. Playback recording level check and adjustment. Back tension mechanical adjustment during tape playback (back tension during playback), fast forward, and rewind operation (FF/REW) inspections are good. Timer start operation is normal. Tape auto reverse operation is normal. The auto reverse operation during recording was also done normally. Reference value: Self-recording playback W&F (WTD): 0.035% (19cm/s) However, it depends on the tape used. (The recording and playback test with the music source is good.) Accessories: copy of instruction manual, original box Main specifications: Reverse recording reopen deck 4 tracks 2 channels size W440 × H244 × D227 mm Weight 17.0 kg
- description
- The price has been reduced! 2022/8/5 selling price 198,000 yen Maintained! It is an open deck with a reputation for excellent sound quality. An electronic governor and AC servo motor are used for the drive part. Excellent characteristics are obtained regardless of variations in power supply voltage or differences in power supply frequency. In particular, the mid-range sound reproduces a precise, thick, and powerful sound. Clampers are not included. As for the exterior, there are unevenness in the kusumi and the top plate. Serial S014586 (Eiji Tamura) Maintenance Information: 2022.8.5 Maintained (Regeneration (Equalizer) Amplifier Oscillates, Phase Correction Capacitor Additional Treatment, Right Reel Motor Drive Part C Relay Circuit Time Constant Electrolytic Capacitor Capacity adjustment, Main volume selector damaged part resin repair strengthening treatment, pinch roller disassembly cleaning, counter belt replacement, head tilt check and adjustment, playback and recording level check and adjustment, Level meter indication value calibration (When 0VU is indicated by the AUX signal on the output volume scale 7, the output terminal is 0.775V (0dBm). Note that the indicated value of the level meter during playback is different from the position of the input volume in AUX. Generally, the 0VU instruction for playback comes near the maximum input volume. Level meter readings are for reference only. Capstan motor motor speed adjustment (19cm/sec and 38cm/sec) within ± 0.3%, headphone jack cleaning, internal electrical circuit deterioration corrosion wiring code, printed pattern Due to the risk of damage and electric leakage, some parts have been replaced, for reference: W &F (WTD) for self-recording playback: 0.016% (38 cm·s) 0.03% (19 cm·s) W&F depends on the tape. Residual noise (during blank tape playback); -58dB (However, linear measurement when 400Hz0dB is the playback standard level: no auditory correction), and other tape end detection operation tests are normal. If the leader tape is transparent, stop halfway without winding it to the end. (If you want to wind it up to the end, you can wind it up by pressing and holding the PLAY button) Accessories: power cord Main specifications: 2 track stereotype speed 19/38 cm W413 × H359 × D215 mm 15.4 kg
- description
- Maintenance has been completed! A full-fledged, high-performance open deck developed for audiophiles. The warm, thick sound quality with a texture is attractive. 2 tracks 19/38 cm speed, 4 tracks 2 channels can be used for playback only. The amplifier part and the mechanical part are separate types, and the motor part can be used even when laid down, so it is easy to use like a desktop type for business use. The appearance is dull and oxidized. Serial 120446 (Satoshi Yonejima) Maintenance information: 2022.7.16 Maintained (mechanical part control circuit deterioration transistor replacement, Zener diode short replacement, fuse replacement. Tape tension arm cleaning oil application, capstan shaft oil application. Tape speed adjustment is checked with an internal frequency generator (FG) and a reference tape. Since the 2TR glass head is difficult to obtain, the 2TR regeneration head is a TEAC NOS product and can be installed as a substitute. →The frequency characteristics are maintained without changing the playback EQ. Compatible with 2TR head NOS products for TEAC decks. Head tilt check and adjustment, playback level and recording level check and adjustment, and recording playback test with music source are good. Other tape detection sensor lamp and REC mode indicator lamp replacement. (For reference: W&F (WTD) during self-recording playback; 0.05%, but it depends on the tape used) Accessories: clamper Main specifications: 3 motors, 2 speeds, stereo tape deck, 2 tracks, 2 channels, recording/playback, 4 tracks, 2 channels, playback, comprehensive frequency characteristics: 38cm/30Hz to 30kHz, 19cm20Hz ~ 20kHz Mechanical Part W505 × H402 × D310 mm 27 kg Amplifier Part W490 × H180 × D330 mm 8.5 kg
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2022/6/7 sales price 198,000 yen maintenance completed! Supports a variety of applications, from 2-track 19/38cm recording and re-recording to 4-track 19/9.5cm playback. A popular model that employs a unique isolate loop method by Technics. The unique mechanism of single capstan and double pinch roller achieves stable driving performance. The rich sound that responds to hearing is unique to open decks. The appearance has a feeling of use such as dullness, scratches, rust, etc. Serial RD869987 (Nobuyuki Takahashi) Maintenance Information: 2022.6.7 Maintained (1 Reel clamper shaft replacement, spring added holding force 1kg, motor shaft and bearing oil/grease applied, reel height adjustment 2 Power cord replacement and replacement of 3 fuses for deterioration 3 counter belt replacement (x2), counter mechanical cleaning and shaft oil replenishment, character addition treatment for character disappearance 4 reel tension arm Bearing grease up and cleaning treatment, micro switch replacement (×1) 5 reel base brake pad replacement (×4) and brake adjustment, reel stand height adjusted, reel motor at PLAY Winding and back tension torque adjustment 6 Operation panel lamp replacement (×3) and tact switch disassembly cleaning treatment, key operation knob cushion pad replacement 7 Pinch roller and axis Clean and apply oil to pinch roller shaft 8 Replace many deteriorated electrolytic capacitors (power supply board part (×13), playback amplifier board part (×11), recording amplifier board part (×26), bias Amplifier board part (×2), reel control unit (×14), control logic part (×9), lineAMP etc. (×23) total 108 pieces) 9 head block section cleaning and head changeover switch disassembly Cleaning Procedure 10 Capstan Motor Servo Circuit PLL Lock Timing Adjustment & Speed Changeover Switch Disassembly Cleaning & Pitch Control Volume Cleaning Treatment 11 Input Volume (LINE, MIC) and output volume cleaning treatment, lever switch disassembly cleaning treatment (Monitor SW × 2, Tape Select SW × 2, Rec Mode SW×2 12 Head tilt adjustment (azimuth adjustment), playback level adjustment (200nWb/m0dB), equalizer adjustment, recording level and bias adjustment, bias trap adjustment, meter level indication Adjustment 13 meter panel for decolorization of scale bar scale part red only correction 14 Others, substrate cleaning and solder check and additional soldering treatment, input and output terminal cleaning, sensory by music source Inspection was carried out and the results were good. 15 Reference value; Self-recording playback W&F (WTD) 0.025%, WOW (0.017%), Flutter (0.05%) and good. However, it depends on the tape used. 16 Precautions for use; When using a back coating type tape with a closed loop type, W&F may deteriorate because the tape slippage becomes worse due to the closed-loop running mechanism. (This is caused by the deterioration of the mechanism and backcoat tape slippage, and can only be improved by replacing the tape.) Accessories: None Main specifications: 2 tracks 2 channels (recording/playback) 4 tracks 2 channels (playback) maximum use Reel No. 10 tape speed/9.5/19/38 cm Isolated loop mechanism Quartz Capstan direct drive by PLL method W456 × H443 × D257mm 23kg
- description
- The price has been drastically reduced. 2022/6/3 selling price 198,000 yen. *No. 10 reel clamper is out of stock. It's been maintained! Akai 4-track open reel deck with reverse The crisp electronic control logic works comfortably. You can rerecord with thick, clear sound quality. When the power is turned on, the light of the meter lamp shines (Yoichi Murakoshi) Maintenance Information: 2022.6.2 Maintenance (REC, Output Volume, Counter Mechanical Disassembly Cleaning. Regeneration equalizer comprehensive adjustment, playhead base demagnetization treatment, internal cleaning and board cleaning treatment, power cord replacement and power supply fuse inspection and terminal cleaning treatment, pinch roller drive mechanical cleaning And grease application, pinch roller shaft cleaning and oil application, capstan shaft shaft oil lubrication, bearing part grease application, counter mechanical cleaning and oil application, tension arm mechanical decomposition Cleaning and oil application, cleaning treatment of multiple slide switch contacts for FWD/REV playback and recording switching, playback equalizer part (x10), recording amplifier section x12), LINE input amplifier section ( x12), replacement of coupling and decoupling capacitors for BIAS oscillation circuit electrolytic capacitor replacement (x2) (36 total). LINE amplifier transistor low-noise product replacement treatment (x8), REC volume and output volume contact cleaning treatment, meter lamp replacement and lamp voltage adjustment, tape path adjustment and Head tilt height check and fine adjustment, then head tilt adjustment, playback level and playback equalizer constant fine adjustment, recording head tilt adjustment, recording level and recording vice adjustment, recording playback by music source Sensory tests. Playback crosstalk checked.) Accessories: None Main specifications: 4-track, 2-channel, reversible tape speed 19/9.5cm/sec Frequency characteristic 30-25,000 Hz tape selector 2-stage switching (wide range/low noise) W440 × H483 × D256mm 21kg
- description
- 2 Tiger 19/38cm Open Reel Deck X-1000m Equipped with a dream noise reduction DBX boasting a SN ratio of 100dB/dynamic range of 115dB. I was once again impressed by the high ability of recording and playback. The difference between the source and the playback sound in the audible band cannot be heard, probably because the noise floor is low and the recording is high accuracy. There is noticeable damage to the wood part on the exterior. Serial 490081 (Satoshi Yonejima) Maintenance information: 2022.5.23 operation confirmed. 2011.12.3Manufacturer maintained (cleaning/inspection/adjustment of pinch roller replacement mechanism and consumable parts replacement operation, recording/playback, adjustment test) Accessories: wired remote Main specifications: Playback frequency 30 Hz to 36,000 Hz Playback only 4 tracks possible Closed loop dual capstan mechanism EE tape compatible W472 × H486 × D262 mm 26 kg
- description
- Maintained! Compatible with a variety of applications, from 2-track 19/38cm recording and playback to 4-track 19/9.5cm playback. A popular model that employs Technics's own isolated loop method. The unique mechanism of single capstan and double pinch roller achieves stable driving performance. The rich sound that responds to hearing is unique to an open deck. The appearance may be dull or paint loss. Serial RG810445 (Satoshi Yonejima) Maintenance information: 2022.4.17 Maintained (power supply board, 13 electrolytic capacitors replaced. Reel servo board, 11 electrolytic capacitors are replaced. Replace 10 capstan servo board electrolytic capacitors Replaced 3 electrolytic capacitors on the control board. Replaced 50 pieces of playback recording amplifier board bias circuit part electrolytic capacitor Lever switch contact cleaning, deformation correction, and knob replacement. REC level volume and output level volume cleaning treatment. Operation key lamp replacement procedure. Counter mechanism cleaning treatment, belt replacement. Tension roller cleaning, reversing roller disassembly cleaning. Head block cleaning and head changeover switch disassembly cleaning. Signal level check and adjustment for playback system and recording system. Each playback recording head cleaning, polishing treatment. Head housing part connector and harness replacement. (Self-recording and playback W &F (WTD) 0.02%) Accessories: clamper Main Specifications: 2 Tracks 2 Channels (Recording/Playback) 4 Tracks 2 Channels (Playback) Maximum Usage Reel No. 10 Tape Speed/9.5/19/38cm Isolated Loop Mechanism Quartz Capstan direct drive by PLL method W456 × H443 × D257 mm 23 kg
- description
- * Recording and playback tests have been performed, but there is a luster in the volume. Since it cannot be maintained in the future, we will sell it as it is. 2 tiger 38 cm open reel deck Time counter with gapless punch in punch out function and 5 point locating function. A model equipped with various editing functions such as edit queuing. The appearance has a feeling of use corresponding to the year (Fujisawa Yukishi) Maintenance Information: 2022.2.17 Recording/Playback Tested There is a gulp in the volume. Accessories: Instruction manual Main specifications: 2 tracks 38cm specification W483 × H444 × D180mm 28kg
- description
- Currently, both recording and playback are good. It has been maintained in 2019, but it does not turn the counter, and since there is a gully in the REC volume, it is currently sold cheaply. 2-track 38/19cm specification Denon's separate open reel deck It is a full-fledged model where you can enjoy solid sound quality with little coloring as a whole, not to mention the sense of stability of the model for business use (Fujisawa Yukishi) Maintenance information: 2022.2.2 operation confirmed (recording and playback OK. The counter doesn't turn. There is gulling in the REC volume. (Since it can be used as it is, it is sold as it is) 2019.5.15Maintained (replace transistor, relay, etc. (Speed, driving system, recording readjustment) Accessories: Copy of instruction manual Main specifications: 2 tracks 38/19cm specification mechanism part W470 × H385 × D270mm 20kg Amplifier part W460 × H180 × D235mm 6.5kg
- description
- The price has been reduced! 2022/2/2 sales price 198,000 yen Maintained in 2018! Denon's open deck flagship machine that utilizes the technology for business use cultivated in NHK and studios. Recording and playback are only 2 tracks, but 4 tracks and 2 channels can be played back by switching the switch. A high-class open final model that generously incorporates the company's technology, such as a proprietary Sendust alloy head and a direct drive 2 capstan. The straightforward and bony sound is attractive (Fujisawa Yukishi) Maintenance information: 2022.2.2 operation confirmed (2 tiger 19/38 cm recording/playback OK. (The feel of the 2T/4T switching button on the head is a little hard, but it is possible to switch.) 2028.3.21 Maintained (Transistor, Capacitor Replaced. Sensor lamp installation Head polishing. (Driving system, recording, playback adjustment) Accessories: Copy of instruction manual Main specifications: 2 tracks 19/38 cm speed direct drive frequency characteristics [38 cm] 30 Hz to 30 kHz [19 cm] 20 Hz to 20 kHz mechanical part W505 × H420 × D310mm 27kg Amplifier W490×H180×D330mm 8.5kg
- description
- * The current operation is stable, but because it is for business use, it is the status quo without warranty. It is an open reel deck with high sound quality that was only made for broadcasters. Adopts a high-precision, sturdy aluminum cast deck plate. Can be used with 5/7/10.5 inch reels Built-in monitor speaker, equipped with line output key. Output level +4 dB and -20 dB can be switched. There is a crack in the left meter window (Fujisawa Yukishi) Maintenance information: 2022.2.2 operation confirmed (2 tiger 19/38/76 cm recording/playback OK. (Monitor OK, there is a slight drop in the high range) Accessories: Copy of instruction manual, power cord, connection cord Main specifications: CUE switch convenient for 2-track stereo recording/playback cueing etc. W634xH1040xD759mm 90kg
- description
- Nagra 4.2 has arrived for the first time in a long time! Full track mono recording and playback is possible. This is a portable open deck that was also used to record audio at movies and broadcasters. When playing vocal music, you can hear a thick and glossy sound. It is powered by 12 single dry batteries. The appearance is dull over time. Serial 106984 (Satoshi Yoneshima) Maintenance information: 2021.12.11 operation confirmed (recording/playback, basic operation check OK) Accessories: 12 single batteries Main specifications: 1 track usable Reel size: No. 5, No. 7 reel track method: high frequency bias full track head: recording/playing/erasing input: microphone × 2 (200Ω balanced) line (100KΩ Unbalanced) mixer (9kΩ · 5600mV) tape speed: 9.5, 19, 38cm W333 × H113 × D242mm 5.25kg
- description
- Maintenance has been completed! 4-track open reel deck with Akai reverse The crunchy electronic control logic works comfortably. You can record with thick, clear sound quality. When the power is turned on, the light of the meter lamp shines. Appearance has small scratches and dullness. Serial 40212-00533 (Satoshi Yoneshima) Maintenance information: 2021.12.5 Maintained (cleaning and grease up of pinch roller drive mechanism, pinch roller shaft cleaning and oil application. Capstan motor bearing hard ball replacement and grease up treatment, pitch control switching relay contact cleaning treatment and tape speed adjustment, tension arm mechanical disassembly check and oil on rotating shaft Application, tape sensing mechanism check (auto reverse operation check normal) Check reel motor driving force check at PLAY, contact cleaning treatment by detachment and disassembly of multiple switches for switching. Dirt removal and cleaning procedures for playback equalizers, recording amplifiers, and LINE amplifier substrates. Replaced the front panel REC mode switch. LINE amplifier, MIC amplifier part Replacement with transistor LowNoise and R11 constant change (Line-TRX4, MIC-TRX2, Rec-x1)) coupling of regenerative equalizer amplifier circuit Replacing the coupling capacitor in and. Recording amplifier coupling and decoupling capacitor replacement+22V line power supply control unit transistor replacement, bias oscillation circuit part electrolytic capacitor replacement, head cleaning and azimuth angle adjustment Check and adjust playback level, recording level, recording frequency characteristics. Color addition procedure because the red line of the right level meter scale has decolorization. MIC, LINE input volume cleaning, OUTPUT volume, pitch control volume cleaning. Capstan motor servo circuit signal processing transistor replacement, and electrolytic capacitor replacement, recording and playback sensory test by music source is good. (Other: residual noise - 55dB, recording and playback: W&F (WTD) 0.05%, Flutter (0.08%) However, it depends on the tape used) Accessories: clamper, cover Main specifications: 4 tracks 2 channels reversible tape speed 19/9.5 cm/sec Frequency characteristics 30 ~ 25,000 Hz tape selector 2-stage switching (wide range/low noise) W440 × H483 × D256mm 21kg
- description
- Maintenance has been completed! Equipped with excellent mechanisms such as DBX and EE tape support, it is one that still boasts high popularity. Compared to other models, the relatively high range extends neatly, and the sound quality is too soft and has a soft core. Of course, the sound is solid and has a calm sound. Small scratches and kusumi of age can be seen (Yoichi Murakoshi) Maintenance information: 2021.11.20 Maintenance (flyhole, capstan shaft cleaning and oil application, flywheel bearing part grease application, capstan belt replacement, capstan Motor rotation speed adjustment within ± 0.5% Cleaning and grease up of pinch roller driven mechs Tension arm disassembly cleaning, oil application and arm cushion installation Rev-Play rewinding torque 50g±10g readjustment. TAPE-MONITOR, TAPE-SELECTOR, Dbx Switch Detachment Cleaning Substrate REV/FWD-PLAY/REC switching multiple switch detachment cleaning and playback, recording circuit part electrolytic capacitor inspection and partial replacement treatment, bias strap adjustment. Head surface polishing treatment. Detachment cleaning for IC pins in microcomputer substrate and IC products in DBX substrate. Head tilt azimuth adjustment, playback level/playback equalizer adjustment, recording level adjustment and recording bias adjustment, good sensory inspection in music source, good Dbx recording operation.) Accessories: Instruction manual Main specifications: 4 track · 2 channel 6 head reel 26 type · 17 shape tape speed 19 cm/s · 9.5 cm/s Frequency characteristics 19 cm/s: 30 Hz ~ 34 kHz 9.5 cm/s: 30 Hz ~ 24kHz Headphones 8Ω Power Consumption 88W W432 × H452 × D262mm Weight 22kg
- description
- Maintained! 4-Track Open Reel Deck with Akai Reverse The crunchy electronic control logic is really pleasant. You can record again with a sharp and clear sound. When the power is turned on, the light of the meter lamp shines. The appearance has scratches, dullness, and rust floats. Serial 60710-20920 (Satoshi Yonejima) Maintenance information: 2021.10.30 Maintained (Pinch roller drive mechanism cleaning and grease up treatment and oil application around the shaft. Capstan motor part due to bearing ball defect, grease up and motor shaft oil lubrication, capstan motor control semi-fixed volume cleaning, motor rotation speed with reference tape ± Adjustments were made within 0.5%. Tension arm cleaning and oil application to shaft, micro switch contact cleaning of left tension arm. Reel motor shaft oil lubrication and brake band cleaning. Removal due to adhesion of dirt on the substrate surface, replacement of jumper wires for defective jumper elements in the recording amplifier board, cleaning contacts of FWD/REV switching slide switches and contacts of operation volume ( LINE volume, MIC volume, pitch control volume, output level volume) AC cable replacement and power switch contacts deterioration check and cleaning, fuse board Cleaning and fuse inspection and terminal cleaning. Deckup ring and coupling capacitor exchange and semi-fixed volume exchange of playback equalizer amplifier and recording amplifier part, playback and recording head angle azimuth adjustment, playback level and recording level adjustment; Good recording and playback test by music source, reverse mode and timer start operation normal. The 10" reel clamper was disassembled and cleaned and applied with a small amount of oil as it did not move hard. Fixed the disappearance of counter characters. Reference value: W&F (WTD) 0.055% (However, it depends on the tape used.) Accessories: cover, clamper, copy of instruction manual Main specifications: 4 tracks 2 channels reversible tape speed 19/9.5 cm/sec Frequency characteristic 30 ~ 25,000 Hz tape selector 2 stage switching (wide range/low noise) W440 × H483×D256mm 21kg
- description
- * If the level difference between the left and right channels of the level meter comes out from around -10dB, and if the volume is set to 12:00 or higher when the LINE/MIC input changeover switch is operated, noise will occur, but performance It will be a limit. Fully maintained! 4 track specifications The technology of the time is generously introduced to improve performance, enable low-frequency extrusion and clear sound quality, and feel analog-like. Please enjoy the model that made it possible to reproduce high-quality recordings unique to Lubox (Yoichi Murakoshi) Maintenance information: 2021.10.16 Maintenance (scale plate adhesion procedure for floating inside the right meter panel. Exterior surface cleaning. Timing belt installation and counter belt deterioration replacement Changeover switch contact cleaning Cleaning the pinch roller shaft and capstan shaft and applying oil to the shaft. Motor drive block capacitor replacement x3, motor control part electrolytic capacitor and semi-fixed VR replacement, capstan motor rotation speed adjustment. Replace electrolytic capacitors and coupling capacitors, decoupling electrolytic capacitors, power supply fuses, reel motors and capstan motors in each substrate, bias adjustment. Semi-fixed VR exchange, first stage transistor low noise product. Multiple slide switches detachable for cleaning and contact grease application. REC level volume and input selector and REC switch contacts cleaning. Input switching SW noise check, adjustment by semi-fixed volume exchange of regeneration amplifier, monitor amplifier, bias circuit board, operation test. Head surface rust surface removal polishing, head angle (azimuth) adjustment, playback level, recording level and bias adjustment.) Accessories: Power cable (non-genuine) Main specifications: 4 tracks 2 channels 9.5/19cm W452 × H414 × D207mm 17kg
- description
- MAINTENANCE! Equipped with excellent mechanisms such as dbx and EE tape support, it is still one that boasts high popularity. Compared to other models, it has a relatively high range that stretches cleanly and is not too soft and has a sound quality with a strong core. Of course, it has a thick, solid sound for a calming sound. You can see old small scratches, Kusumi. Serial 4257 (Yuki Yamato) Maintenance information: 2021.6.14 Maintained (flywheel cleaning and capstan belt replacement capstan shaft oil applied pinch roller drive mechanical base disassembly Cleaning and grease & oil application Microcomputer part reset IC replacement power supply unit and playback recording amplifier part electrolytic capacitor 7 replacement adjustment operation volume cleaning procedures (MICVR, LINEVR, OUTPUTVR) push switch contacts desorption cleaning procedures (DBX SW, RECMODE SW, TAPESELECTOR SW, TAPE MONITOR SW, TAPE MONITOR SW Switch Cleaning) Recording and Playback Amplifier Switching Multi-Link Switch Contacts Disassembly Cleaning Treatment Playback Picture Equalizer Part 3 Semi-Fixed VR Replacement FWD, REV Recording Head Bias Switching Relay Replacement Replacing two semi-fixed volumes of capstan motor servo parts, motor speed adjustment, tension arm cushion replacement and reel drive torque inspection adjustment TAKEUP: 50g ±10g, Back Check tension 50g operation button operation check and tact switch part replacement x1 other operation switch Contact status confirmed Head angle adjustment, playback level adjustment, recording bias and recording level adjustment did. The dbx recording encoder & playback decoder level is adjusted and the operation is normalized, viewing normal operation is confirmed, and the recording playback operation and the reverse recording operation are also good. For reference: W&F (WTD) with self-recorded playback: 0.02% (but depends on the tape used) Accessories: Manual copy Main specifications: 4 tracks, 2 channels, 6 head reels 26, 17 tape speed 19cm/s · 9.5cm/s Frequency characteristics 19cm/s: 30Hz to 34kHz 9.5cm/s: 30Hz 9.5cm/s: 30Hz 24KHz Headphone 8Ω Power Consumption 88W W432 x H452 x D262mm Weight 22kg
- description
- Significantly reduced price! 2021/2/27 Selling price 148,000 yen Maintenance! Equipped with excellent mechanisms such as DBX and EE tape support, it is one that still boasts high popularity. Compared to other models, the relatively high range stretches beautifully and becomes too soft, so it is a sound quality with a firm core. Of course, it is finished in a calm sound with a solid sound of thickness. There is a feeling of use corresponding to the age, Kusumi. Serial 600197 (Makoto Kono) Maintenance information: 2021.2.27 Maintenance (Internal cleaning by desorption of head-driven mechanics and cleaning of grease coating tape guide pins, head parts, pinch rollers, etc. REV <—>Desorption and disassembly of multi-series slide switches for FWD regeneration and PB-REC switching Internal cleaning flywheel cleaning and oil application on shaft and capstan belt replacement pinch roller For cleaning and impedance roller disassembly cleaning and left reel stand height misalignment pinch roller plunger stroke adjustment crimping force 1.5kg Capstan motor control part half Electrolytic capacitor exchange reel for fixed volume exchange motor speed adjustment playback recording board part and reel motor drive control unit pattern repair, soldering and decoupling circuit of recording amplifier Drive Torque Left and Right Adjustment TapeMonitor TapeSelector RecModesW and DBX Operation Switch Disassembly Cleaning Playhead Height Adjustment and Head Azimuth Adjustment Playback Level Recording Level Adjustment and Operation Aging Music Source Recording Test DBX Recording Playback Test FwdPlay Takeup Tension (50g) Back-Tension (50g) RevPlay Takeup Tension (50g) Back-Tension (50g) FF/REW: 110g REC & PLAY) Accessories: Instruction manual copy Main specifications: 4 tracks, 2 channels, 6 headreels 26, 17 tape speed 19cm/s, 9.5 cm/s Frequency characteristics 19cm/s: 30Hz to 34kHz 9.5 cm/s: 30Hz 24kHz Headphone 8Ω Power Consumption 88W W432 x H452 x D262 mm Weight 22kg
- description
- Deterioration capacitor 11 pieces, volume total 5 pieces, other lamps and belts, all pin jacks etc. Replace with new items and complete maintenance of the whole body! 2 track open deck of rubox A superb fulfilling sound that can never be heard on digital devices has been revived brilliantly. I auditioned at the store, but with the thick sound of STUDER handed over, you can enjoy a thick sound that is better than the sound source before recording. Appearance has scar repair marks on the side (Sasaki Shota) Maintenance information: 2021.2.24 Maintenance (replacement of mechanical consumable parts such as counter belts, precision polishing of heads, degraded capacitors, semi-fixed volumes, etc., replacement of all pin jacks, etc. (Operation inspection adjustment, recording readjustment.) Accessories: 2 x No. 10 clampers, 1 DIN to RCA cable Main specifications: 2 tracks 2 channels 38/19/9.5cm 3 motor use reel max 10 W483 × H462×D207mm 23.3kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
