Comes with casters! Sound Magic horizontal 2-tier rack. Uses 38mm diameter struts and high-compression, high-mass 19mm thick special MDF. A circular cut is applied to the back to make the cables easier to put together. There are scratches, repair marks, etc. There is a scratch on the shelf. ※Shipping costs will be estimated separately (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W1138 x H476 x D501 mm weight 28 kg load capacity 80 kg/shelf
This is an open rack made by Watanabe Woodlife, a manufacturer specializing in timber. The soft-colored wood seems to suit a variety of rooms. There are large sunburn marks on the top plate on the exterior. *Please do not install heavy amplifiers or the like as they are not strong enough (Mizusaki Ryo)
Accessories: none
Main specifications: W600 x H750 x D450 mm (including casters) shelf spacing 130/230/180 mm weight 10.3 kg (actual measurement)
with casters KP-40CT! The simple, edgy design and calm coloring seem to be compatible with a variety of room specifications and equipment. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: copy of the manual
Main specifications: top plate load capacity 100 kg or less, shelf board 50 kg or less, bottom plate 100 kg or less, total load capacity 200 kg W591 x H460 x D550 mm 24 kg
Popular 3-tier rack. The metal frame is sturdy. The size is a space-saving design with the outer dimensions cut down to the last minute and the inner dimensions extended to the last minute. The tight and accurate sound quality brings out the performance of the device. The exterior has dullness, scuffs, etc. ※The upper shelf board spike screws are missing (Hiroki Aso)
Accessories: spike holder
Main specifications: 3-tier rack, load capacity up to 50 kg, shelf spacing 140/310 mm, W540 x D484 x H655mm, 31 kg
It is a beautiful item with a special caster CS-120! ※The column length is 15 cm/20 cm/25 cm. 4-tier audio rack made by TAOC High density MDF material is used. It is in excellent condition. (Yamato Yuki)
Accessories: instruction manual felt hex wrench TAOC emblem
Main specifications: external dimensions W600 x H785 x D520 mm (including casters), weight 23 kg (both measured)
Hamilex audio rack It is a polyurethane resin coating finish with excellent water resistance, weather resistance, and color retention. There are repairs to the top corner of the bottom and others. Please contact us for shipping costs (Murakoshi Yoichi)
Accessories: none
Main specifications: W618 x H1000 x D560 mm 53 kg
The price has been reduced. 2024/3/10 sales price 98,000 yen*The center pole has been changed from SN-PL185B to SN-PL235B. ADK 4-tier rack The high-grade cherry wood and slit structure with good heat dissipation efficiency disperse vibrations from the device and can be expected to have the effect of suppressing resonance. The pole is SN-PL185B/SN-PL235B/SN-PL235B from above. Missing due to spikes (Takasaki Atsushi)
Accessories: spikes
Main specifications: measured W600 x D470 x H810 mm weight 14.5 kg load capacity 100 kg (top plate, middle plate, bottom plate)
Hi-Fi is in stock for the first time! The “Grand Magnesia” series 2-tier rack was improved based on the company's long-selling model “Magnesia.” The newly developed GMR spike realizes ultimate seismic control measures and measures against static electricity. The exterior includes line scratches and bumps. (FUJISAWA KOSHI)
Accessories: instruction manual, hex wrench, spike base
Main specifications: shelf board size W600 x H21 x D500 mm between shelves H230 mm (actual measurement) load capacity 100 kg (per tier)
6-tier specification with 1 SB-1 shelf board added. Popular all spike support structure rack. It has a sturdy construction with a metal frame. The size has been cut down to the last minute to the outer dimensions, and the internal dimensions have been expanded to the last minute in a space-saving design. It brings out the performance of the device with tight and accurate sound quality*Shipping costs are estimated separately (Oikawa Tetsuji)
Accessories: spike holder
Main specifications: cast iron frame W540×H1175×D483mm 62 kg
This is a set of 4 100mm poles (19mm diameter) from Quadrado Spire. Please use it to add shelves or extend poles for Q4, Q4D, etc. The exterior has scratches, dullness, etc. (Tamai Jun)
Accessories: none
The set of 4 19mm flat feet for quadraspires is a black color spike stand, so it can be easily installed. The exterior has a feeling of use such as dullness and small scratches (Jun Tamai)
Accessories: none
Main specifications: flat feet, 19 mm diameter/53 mm long
Popular 4-tier audio rack. It is sturdy with a metal frame. A space-saving design with the outer dimensions cut down to the last minute and the internal dimensions extended to the last minute. It brings out the performance of the device with tight and accurate sound quality. The exterior has scuffs and rust all over (Wang Zhan)
Accessories: spikes, saucers
Main specifications: 4 tier rack cast iron frame W540×D484×H935mm 41kg
A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood with a sturdy structure and interior design. There is a small scratch ※Shipping fee will be estimated separately (Oikawa Tetsuji)
Main specifications: W1,230×H703×D563mm 52.0kg
Spike, spike holder included! Popular Quadraspires 4-tier rack. In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is subtly curved and cut so that vibration components gather at the four corners. There is a feeling of use such as scratches, dull insulator marks, etc. (Kanai Hidetsugu)
Accessories: spike, spike receiver
Main specifications: 4-tier rack, 180 mm between shelves, W600 x H690 x D475 mm, 13.3 kg
Set of 4 326mm poles for the Q4D and QAVM series racks. This length is useful when installing large power amplifiers. The exterior has a feeling of use such as dullness and small scratches (Jun Tamai)
Accessories: none
Main specifications: length 326 mm diameter 19 mm
ADK's classic 3-tier rack. The full body is made of solid natural wood and blends beautifully with the interior. The shelves can be adjusted up and down by removing the columns. There is a slight small wound (Oikawa Tetsuji)
Accessories: none
Main specifications: external dimensions W660 mm x D560 mm x H475 mm approx. 22 kg
Quadrado Spire 216mm pole set of 4 It is convenient when installing preamplifiers, etc. There is a feeling of use on the exterior such as small scratches and dullness (Tamai Jun)
Accessories: none
Main specifications: length 216 mm diameter 19 mm
HAMILEX audio rack. The dark brown look and the warmth of the wood create a calm atmosphere. Veneer peeling is scattered (Daiki Goto)
Accessories: instruction manual
Main specifications: W1050 x H479 x D480 mm weight 37 kg
Yamaha audio rack Yamaha's excellent woodworking technology and carefully selected materials provide a high-quality audio life. I also recommend it to Yamaha Party members. There are no noticeable scratches, but there is dirt and dullness similar to age (Daiki Goto)
Accessories: instruction manual, wrench, lid
Main specifications: W516 x H1008 x D440 mm weight 36 kg
※1 shelf board is missing. This model has an open form and is perfect for heat dissipation. This is a weight rack whose spacing can be changed with L-shaped brackets and screws. There are many dents and line marks on the exterior, top surface, and shelf boards, and dullness and a feeling of use can also be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: shelf board size W525 x D470 mm total load capacity approx. 250 kg W626 x D582 x H1122 mm 64 kg
Hamilex audio rack with glass door There are 4 shelves, so you can store 5 lightweight equipment. The exterior has dullness and small scratches (Satoshi Yonejima)
Accessories: instruction manual
Main specifications: total load capacity approx. 100 kg W560 x D480 x H900 mm 35 kg
A popular large rack. It is a model with adjustable storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W1,230×H703×D563mm 52.0kg
The price has been reduced. 2023/11/7 sales price 18,000 yen System upgrade type full body solid natural wood audio rack. Units can be piled up one after another as the number of AV devices increases. There are scratches and scratches on the exterior. There is a cag veil attached to the bottom. (Miura Kimiya)
Accessories: No accessories
Main specifications: 1-stage load capacity 100 kg (top plate) W1,109 x H320 x D500 mm 33 kg
The price has been drastically reduced. 2024/2/15 sales price 20,000 yen Hamilex (Hayami Kosan) glass AV rack with casters. It is also ideal for installing a flat screen LCD TV. Clear glass 12mm thick, silver pole. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: W1050 x H538 x D45 mm 40.2 kg (actual measurement) 220 mm under 160 between shelves, total load capacity approx. 120 kg
3-tier, 3-row MSR rack type. Dark grey metallic color 9 full-sized audio devices can be installed. The exterior, dullness, and a feeling of use such as small scratches can be seen, but they are generally good (Kobayashi Hitoshi)
Accessories: instruction manual, hex wrench
Main specifications: lower stage 250 mm, upper stage 150 mm external dimensions W1670 x H490 x D470 mm weight 38.4 kg
Popular 4-tier audio rack. Sturdy construction with a metal frame. A space-saving design with the outer dimensions cut down to the last minute and the internal dimensions extended to the last minute. It brings out the performance of the device with tight and accurate sound quality. The exterior has scuffs and rust all over (Wang Zhan)
Main specifications: 4 tier rack cast iron frame W540×D484×H935mm 41kg
The 5-tier rack is internally sized to hold a thin audio device. Lightweight amplifiers, AV recorders, etc. can be installed smartly ※Please do not install heavy amplifiers or the like as they lack strength (Kojima Yosuke)
Accessories: none
Main specifications: outer dimensions W605 x H1015 x D400 mm shelf board inner dimensions W480 x D380 mm each tier height 180 mm 10.7 kg
An audio rack with an integrated tuning board and rack that eliminates the need for the part that is twice as complicated as before, where an audio board is placed inside the audio rack for tuning. Also, the top and bottom of the rack are each equipped with 2 mm deep grooves that can be perfectly attached to the same company's D-PROP mini, so you can enjoy upgrading. The exterior has line scratches and threads on the top plate, scratches and chips on the metal part (Mizusaki Ryo)
Accessories: none
Main specifications: outer dimensions W520 x H245 x D420 mm inner dimensions W490 x H195 x D418 mm 13.5 kg
An audio rack with an integrated tuning board and rack that eliminates the need for the part that is twice as complicated as before, where an audio board is placed inside the audio rack for tuning. Also, the top and bottom of the rack are each equipped with 2 mm deep grooves that can be perfectly attached to the same company's D-PROP mini, so you can enjoy upgrading. The exterior has line scratches and threads on the top plate, scratches and chips on the metal part (Mizusaki Ryo)
Accessories: none
Main specifications: outer dimensions W520 x H195 x D420 mm inner dimensions W490 x H146 x D418 mm 12.8 kg
※It is inexpensive because there are holes in the shelves and supports on the back. Large ADK audio rack with SW-01100 stacked on SW-211800. The position of the shelf board can be adjusted in 3 levels with a pitch of 3 mm. On the exterior, there are holes in the shelves and back supports. Also, there are chips, creases, and cracks on the sides. Shipping costs will be estimated separately (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: W1,180 x H832 x D559 mm (actual measurement) estimated 80 kg or more
Comes with casters Hayami's 5-tier vertical audio rack shelf can be changed to a 16mm pitch. The 4-way open structure also has excellent heat dissipation. Sound countermeasures are also good with heavy weight MDF+particle board. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 4 shelves, load: top plate/bottom plate 150 kg, adjustable shelf 50 kg W604H992 x D580 mm weight 58 kg
5 tier rack with glass doors by Denon The shelf can be changed depending on the dowel position. There is a scratch on Kusumi from time to time (Sasaki Shota)
Accessories: none
Main specifications: outer dimensions W580 x H1010 x D470 mm inner dimensions W533 x H866 x D450 mm 36 kg
Denon 3-tier rack with glass doors The shelf can be changed and moved according to the dowel position. There is a dull and small wound (Sasaki Shota)
Accessories: none
Main specifications: outer dimensions W580 x H540 x D470 mm inner dimensions W530 x H415 x D430 mm 12.2 kg (all measured, caster shelves are crowded)
It is a custom-made 4-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 450 mm x 3 shelf board size W280 x 350 mm pole 60 mm square W400 x H1590 x D440 mm 32.8 kg (actual measurement)
※ It is inexpensive because it has scuffs and dents. Comes with casters! Popular 5-tier rack with all spike support structure. It is sturdy with a metal frame. The size has been cut down to the last minute to the outer dimensions, and the internal dimensions have been expanded to the last minute in a space-saving design. It brings out the performance of the device with tight and accurate sound quality. There are abrasions and dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: 4 tier rack cast iron frame height adjustable (pitch 60 mm) W540 x H1175 x D483 mm approx. 48 kg
ADK 4-tier rack Uses highly designed natural wood and essential aluminum materials. The main body frame and inner plate are prevented from vibrating with special material spacers. The struts are interchangeable. The exterior has a slight feeling of use (Kanai Hidetsugu)
Accessories: spike, spike receiver
Main specifications: load capacity 100 kg (top plate/middle plate/bottom plate) shelf board thickness 23 mm 1st tier 230 mm 2nd tier 180 mm 3rd tier 180 mm W600 x H725 (excluding spikes) x D450 mm 16.5 kg
※Cello Audio Palette and Duet 350 were included. It is a custom-made 6-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 390 mm x 1 170 mm x 3 230 mm x 1 shelf board size W600 x 530 mm pole 60 mm square W695 x H1470 x D655 mm 70.9 kg (actual measurement)
※The GOLDMUND TELOS 600 was on board. It is a custom-made 5-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 320 mm shelf board size W600 x 530 mm pole 60 mm square W695 x H1595 x D655 mm 62.3 kg (actual measurement)
※The GOLDMUND TELOS 600 was on board. It is a custom-made 5-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 320 mm shelf board size W600 x 530 mm pole 60 mm square W695 x H1595 x D655 mm 62.3 kg (actual measurement)
The price has been drastically reduced. 2024/1/15 sales price 128,000 yen medium size model. Exclusive rack system for Choral series products. Components machined from aluminum blocks are used to ensure high rigidity and mass. It is a model with a structure that makes the product tilt when installed, and emphasizes visibility, operability, and design that can be used stylishly. The exterior is dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W500 x H125 x D270 mm Weight 6.3 kg
The price has been drastically reduced. 2024/1/15 sales price 128,000 yen small size model. A rack system dedicated to Choral series products. Components machined from aluminum blocks are used to ensure high rigidity and mass. It is a model with a structure that makes the product tilt when installed, and emphasizes visibility, operability, and design that can be used stylishly. There are parts of the exterior where the legs are discolored (Oikawa Tetsuji)
Accessories: none
Main specifications: W500 x H75 x D270 mm Weight 4.7 kg
※The GOLDMUND MIMESIS 28 was on board. It is a custom-made 5-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 320 mm shelf board size W600 x 530 mm pole 60 mm square W695 x H1595 x D655 mm 62.3 kg (actual measurement)
※There was a VIOLA BRAVO 4BOX on it. It is a custom-made 5-tier rack with a sturdy construction and beautiful white wood grain. ※The height of the shelf board cannot be adjusted. There is a feeling of use on the exterior due to dents, dirt, stains, etc. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: shelf board spacing 320 mm shelf board size W780 x 530 mm pole 60 mm square W875 x H1595 x D655 mm 71.7 kg (actual measurement)
Wooden 4-tier rack with casters from unknown manufacturer. The weight is light, and the shelves inside can also be adjusted with dowels, so it seems easy to use. On the exterior, you can see scratches, dullness, etc., feeling of use, installation marks, etc. (Mizusaki Ryo)
Accessories: casters
Main specifications: W580 x H1100 x D470 mm weight 16.5 kg (actual measurement)
Wooden 4-tier rack from unknown manufacturer. The weight is light, and the shelves inside can also be adjusted with dowels, so it seems easy to use. On the exterior, you can see scratches, dullness, etc., feeling of use, installation marks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: W580 x H1100 x D470 mm weight 16.5 kg (actual measurement)
※The exterior is in poor condition, and the top plate screws are not genuine, so they are cheap. A sturdy 5-tier taowk rack. It has a calm color and seems to fit right in with the room. Overall, there is quite a feeling of use such as line scratches, dents, tape marks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: load capacity 100 kg/1 tier shelf spacing 180 mm (top 3 tiers) 230 mm (bottom 1 tier) dimensions W600 x D550 x H943 mm weight 37 kg
This is a special rack for micro players. It is a combination of the F-8000 leg frame and the B-8000, which combines a glass board (G-8000) and a wooden board. Perfect for stabilizing larger record players. There are many stains, scratches, and stains on the exterior. ※Shipping costs will be estimated separately (Takimoto Yutaka)
Accessories: none
Main specifications: external dimensions W900xH485xD580mm upper glass surface dimensions W860xD540mm lower storage W800xH350xD500 mm 48.3 kg (actual measurement)
Rectany replacement needle rack How about for displays, etc. There are cracks and stains in places (Takasaki Atsushi)
Accessories: none
Main specifications: W396×H560×D130mm