The price has been reduced! 2025/2/9 sales price 148,000 yen A 2-way dedicated multi-channel divider with FB-300 loading. 2-way exclusive design with balanced input/output circuits. You can build a clear and fresh multi-system. There are no noticeable scratches on the exterior and it is in good condition. Serial D8Y287 (Fujisawa Yukishi)
Maintenance information: 2025.2.9 operation confirmed
Accessories: instruction manual, power cord
Main specifications: crossover 12.5 kHz W475 x H150 x D395 mm weight 10 kg
Maintained! A must-see channel divider for those who play JBL 4350 etc. with multiple amplifiers. It has a variable high pass level control. Can also be stored in a 1EIA standard rack. There is a strong feeling of use throughout. Serial No. 11567 (Murakoshi Yoichi)
Maintenance Information: 2025.1.9 Maintained (AC cable replacement 2P TAPE
C exchange in other boards, operation check)
Accessories: Standard jack → 6 RCA conversion plugs
Main specifications: Crossover 250 Hz, plug-in modular, signal ratio 90 dB or more, channel separation 70 dB or more, AC 100 to 120 V/200 to 240 V, 50 Hz/60 Hz, power consumption 6 W, W483 x H44 x D194, 1.8 kg
Comes with original box! An ultra-compact variable frequency channel divider. This is a product that allows you to easily enjoy multiple amps, and it is a must-see for those who want to try out multiple amps in the future. (FUJISAWA KOSHI)
Maintenance information: 2025.1.31 operation confirmed
Accessories: instruction manual, power cord, connection cord, original box
Main specifications: crossover frequency 1 kHz to 6 kHz continuously variable W109 x H28 x D60 mm approx. 240 g
The disposal price has been reduced. Member prices are not applicable. 2025/1/20 sales price 328,000 yen Accuphase analog channel divider. This is a 4-way specification equipped with 130 Hz, 1000 Hz, and 8000 Hz cross boards. It is also equipped with a subwoofer system with a mono output on the low frequency side, and is highly expandable and can be flexibly incorporated into the system. The exterior has scratches on the sides and front (Oikawa Tetsuji)
Maintenance information: 2025.1.20 Operation confirmed
Accessories: copy of instruction manual
Main specifications: 2 to 4 way channel divider slope characteristics -12 dB/oct -18 dB/oct -24 dB/oct level adjustment 1 dB step between 0 to -20 dB W475 x H170 x D380 mm 19.6 kg
Panasonic digital multiprocessor. Can be used in stereo with 2 mono channels. I was able to make sounds for each channel in a simple test. Recommended for those who want to touch various things in multiple ways. The exterior is generally dull, has small scratches, and there are footprints and touch repair marks on the top plate (Oikawa Tetsuji)
Maintenance information: 2025.1.14 Operation confirmed
Accessories: none
Main specifications: W480 mm x H88 mm x D350 mm 7.5 kg/1 unit
The price has been reduced. 2024/12/21 sales price 69,800 yen Maintained! JBL UREI standard channel divider. Recommended for those using JBL4345 or 4355 with 2 way/290 Hz specifications. A must have for multi-channel systems in 70s PA systems. ※The balance connection is No. 3 HOT. There is a feeling of use such as dullness and small scratches. Serial 02174 (Takasaki Atsushi)
Maintenance information: 2024.1.25 Maintained (CH2 IC replacement solder correction operation check)
Accessories: none
Key Specifications: Crossover 290 Hz W483 ✕ H44 ✕ D194 mm 1.8 kg
Genuine JBL 2 way channel divider. The frequency is variable, making it extremely easy to use. The low and high frequencies and input gain can be adjusted. Can be used with crossovers 180 to 2,000 Hz and 18 to 200 Hz (1/10 switch). All input/output terminals are XLR terminals. There is a feeling of use such as abrasions, tape marks, and dullness (Takasaki Atsushi)
Maintenance information: 2024.12.29 Operation confirmed
Accessories: Copy of the power cord instruction manual (English)
Main specifications: channel divider, 2 way stereo, 3 way mono, W480 x H45 x D150 mm, 2.5 kg
The price has been reduced. 2024/10/28 sales price 70,000 yen 7,000 Hz module for the rare LNC-2. It is a module that can be converted to 3 ways simply by attaching it to an LNC-2 system center board. Please make the 43 series 3-way or the original system (Sasaki Shota)
Maintenance information: 2023.12.21 storefront operation confirmed (operation confirmed by putting it in LNC-2. Adjust the volume with the trimmer inside the LNC-2. (Rotate backwards to max volume)
Accessories: none
Everything from disassembly and polishing of the volume and frequency selector has been thoroughly maintained! Nikko stereo 2-way/mono 3-way switchable channel divider. All stages have a FET configuration and a protection circuit when the power supply is opening/closing. There is slight dullness on the front and top plate (Daiki Goto)
Maintenance Information: 2024.12.18 Maintained (Action: Panel Switch and Volume Disassembly Contact Polishing. I/O pin jack polish. (Long time sound output operation check)
Accessories: none
Main specifications: 2 way/3 way specification, each crossover frequency adjustable W48.2 x H6.3 x D33.0 cm 5 kg variable frequency between LOW/ MID 125/160/200/250/320/400/500/630/800/1000/1250 Hz (×1) 1250/1600/2000/2500/3200/4000/5000/6300/8,000/10000/12500 Hz (×10) MID/ High 125/160/200/250/320/400/500/630/800/1000/1250Hz (×1) 1250/1600/2000/2500/3200/4000/5000/6300/8,000/10000/12500Hz (×10)
A multi-channel divider that has completely remodeled the DF-55! Equipped with a high-speed, high-precision DSP, it achieves higher filter characteristics with even fewer errors. Also, with a monophonic mode that enables parallel driving of D/A converters, the DF-65 can be fully utilized to further improve performance. There are no noticeable scratches on the exterior. Serial H2Y273 (Tamura Eiji)
Maintenance information: 2024.12.15 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: cutoff frequency 31.5 Hz to 22.4 kHz (-30 dB, 59 points) attenuation characteristics 6 dB/octave, 12/octave, 18/octave, 24/octave, 48/octave, 96/octave level control, each band +45.0 dB to 40.0 dB (0.1 dB steps), time alignment in 0.5 cm units, setting up to 3000 cm, memory function 1 to 5 analog inputs 2 systems (RCA, XLR), 3 digital inputs (coaxial, optical, HS-LINK), 1 digital audio output (HS-LINK), pre-out: 4 systems (RCA/XLR x 4)
W465×H151×D396mm 15.1kg
Complete with all 0/1/2/3/4 units including optional modules S and S3 sold separately! Currently, units 2, 3, and 4 are equipped. Very easy to use channel divider. The ease of use of being able to freely change from 2 to 4 ways, including switching the crossover frequency, shines through. There are no noticeable scratches on the exterior, but there is dullness on the top plate (Sasaki Shota)
Maintenance information: 2024.12.13 Sound output operation confirmed
Accessories: instruction manual, crossover unit 0/1/2/3/4/S/S3
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg
※500 Hz Maintained, 3 pairs of RCA adapters included! A 2-way channel divider for an era that is rough, aggressive, and lively. The low range is fully open, and volume control is possible only for the mid and high frequencies. There is a feeling of use such as scratches and dirt. 120V specification (Takasaki Atsushi)
Maintenance information: 2024.12.3 maintained (deteriorated C replacement, crossover board IN/OUT pin polishing, Volgari → both CH cleaning, replacement of other stage coupling C, power supply filter C, etc., RCA adapter creation)
Accessories: 3 pairs of RCA adapters
Main specifications: crossover 500 Hz W483 × H44 × D194 mm 1.8 kg
A 4-way digital multi-channel divider that realizes full digital signal processing. It is one of the few models that can digitally input SACD data by connecting via HS-Link. All 4 system outputs have both RCA/XLR connections, and each channel is equipped with independent left and right digital attenuators. The 59-point cutoff frequency, higher slope characteristics, phase, level control, etc. can be adjusted arbitrarily. There are multiple scratches on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.11.26 Operation confirmed
Accessories: power cable, copy of instruction manual
Main specifications: 4-way divider unit standard equipment [analog input] RCA x 1, XLR x 1 [digital input] optical x 1, coaxial x 1, HS-LINK x 1 [analog output] XLR x 1, RCA x 1 [digital output] coaxial x 1 W465 x H150.6 x D395.8 mm 14.1 kg
Maintained! A channel divider with variable frequency. It has 4 built-in 18 dB/oct filters, and 2 way, 3 way, mono 4 way, and 5 way can be selected with a switch. Transformers are used for all input and output, which increases the freshness of the sound quality itself, and cuts and graininess are greatly improved. I have the impression that the sound is coming close like a fist. There are a lot of scratches overall. *When switching between x1 and ×10 on the crossover switch, narrow down the output volume to the left before proceeding. There are scratches, scratches, and dirt on the exterior. Serial 3687 (Fujisawa Yukishi)
Maintenance information: 2024.11.22 Maintained (crossover x 1, switching SW exchange x 4 x 10. Replace the fuse box and replace it with the default fuse capacity (now compatible with mini fuses). 3-terminal regulator section electrolytic capacitor replacement x 3 Crossover frequency variable volume contact cleaning and sound output tests are excellent.)
Accessories: copy of instruction manual (English characters), power cord
Main specifications: 2 way/3 way (stereo) 4 way/5 way (mono), each crossover frequency can be adjusted steplessly W483 x H89 x D248 mm 4.5 kg
The price has been reduced. 2024/11/16 sales price 478,000 yen balance line input board AI2-B1 included! 4-way specification with 2 DN-35 units added to the base housing. The high-sampling 192 kHz/24 bit compatible digital channel divider enables accurate phase control unique to this unit. There is dullness (Sasaki Shota)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: manual, power cable, original box
Main specifications: crossover frequency, 54 points, 7 types of attenuation characteristics; digital input: coaxial (RCA), 1 system; size: W475 x H171 x D405 mm; weight: 18 kg
The price has been reduced! 2024/11/8 sales price 89,800 yen with box! LOW type (80 to 2000 Hz) specification. A popular Lux 2-way channel divider model that can be switched between 11 levels of crossover. The operability is good and the crossover can be switched in detail and smoothly. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Asaine Tomoho)
Maintenance information: 2024.11.8 Operation confirmed
Accessories: original box power cable (general purpose)
Main specifications: 2 way channel divider HIGH/LOW independent level control 11 stages (80 150 290 380 500 660 800 1000 1280 1700 2000Hz) RCA-BAL input/output W126 × H182 × D422mm 7.0 kg
The price has been reduced! 2024/10/30 sales price 64,800 yen AccuPhase 2way/3-way channel divider. 500Hz/2 way board included! You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. As for the exterior, there are scratches and dirt on the top plate. Serial I8X071 (Yonejima Satoshi)
Maintenance information: 2023.12.15 Maintained (phase correction capacitor and coupling capacitor replacement. Solder correction. Added 2 missing screws. Card edge contact cleaning. The RCA jack plate is loosened and tightened. (Voice check for each input/output)
Accessories: copy of instruction manual, power cable
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
Maintained! Mark Levinson's famous channel divider. 2-way 500Hz specification. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. The power supply unit is PLS-153L. The exterior is a beautiful individual for its age (Wang Zhan)
Maintenance information: 2024.11.7 maintained (both left and right sides will be replaced due to poor contact with HIGH adjustment volume, LOW adjustment volume contact cleaning, specification inspection, and inspection of each operation)
Accessories: power supply unit, power cable, 6 Remo Pins ✕, connection cable, instruction manual
Main specifications: main body W483 x H51 x D156 mm weight 3.9 kg power supply unit W101 x H101 x D256 mm weight 2.2 kg
The disposal price has been reduced. Member prices are not applicable. 2024/10/28 sales price 198,000 yen The module unit comes with 1, 2, and 4. Maintained! This channel divider is very easy to use. The ease of use of being able to freely change from 2 to 4 ways, including switching the crossover frequency, shines through. There are scratches and scratches on the exterior. Serial 201087 (Sasaki Shota)
Maintenance information: 2024.8.2 Maintained (power indicator lamp, 8 mute relays, micro switch, resistor replacement. Poly slider washers added because they are out of stock. Switch cleaning. Solder correction. Crossover characteristics check. (The interior and exterior have been cleaned.)
Accessories: copy of the manual
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg
This is an Accuphase channel divider for 2way/3way. 800Hz (CB800) and a 2-way board are included. You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while leaving a good analog feel. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2010.8.12 maintenance (coupling capacitor - replacement, power supply electrolytic capacitor - replacement, cleaning of each switch volume contact, solder check, input/output terminal polishing and cleaning, input/output operation check, internal cleaning, etc.)
Accessories: none
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
Default 2-way specification. Precise balance adjustments and crossover frequencies can be arbitrarily changed by independent left and right level control from 0 to -40 dB, and it has a time alignment function, which is the greatest appeal (Sasaki Shota)
Maintenance information: 2024.10.19 Operation confirmed
Accessories: manual, power cable
Main specifications: 2 way specification D/A converter 24 bit MDS system frequency characteristics 0.5 to 50,000 Hz SN116 dB dynamic range 112 dB power consumption 25 W size W475 x H171 x D405 mm mass 18 kg
3-way specification! Precise balance adjustments and crossover frequencies can be arbitrarily changed by independent left and right level control from 0 to -40 dB, and it has a time alignment function, which is the greatest appeal. There is a small scratch on the front (Sasaki Shota)
Maintenance information: 2024.10.19 Operation confirmed
Accessories: manual, power cable
Main specifications: 2 way specification D/A converter 24 bit MDS system frequency characteristics 0.5 to 50,000 Hz SN116 dB dynamic range 112 dB power consumption 25 W size W475 x H171 x D405 mm mass 18 kg
The price has been reduced. 2024/8/29 sales price 69,800 yen Maintained! The crossover board is 250 Hz. A must-see channel divider for those who play the JBL 4350 or 4343 with multiple amplifiers. It has a variable high pass level control. Can also be stored in a 1EIA standard rack. The exterior has line marks on the top plate, and there are abrasions, small scratches, and dullness over time as a whole (Mizusaki Ryo)
Maintenance information: 2024.8.29 maintained (left and right level difference → variations in capacitor capacity within the board → replacement, distortion → poor connector contact, burn → cleaning, VOL cleaning, operation check, cannot be handled if dedicated parts are defective in the future)
Accessories: none
Main specifications: plug-in modular signal-to-noise ratio of 90 dB or more, channel separation 70 dB or more, AC 100 to 120 V/200 to 240 V, 50 Hz/60 Hz, power consumption 6 W, W483 x H44 x D194, 1.8 kg
The price has been drastically reduced. 2024/10/2 sales price 198,000 yen Maintained! We have everything from modular units 0 to 4. Very easy to use channel divider. It is possible to switch from 2 way to 4 way with a single switch, including switching the crossover frequency. A feeling of use can be seen, such as slight abrasions (Kobayashi Hitoshi)
Maintenance information: 2024.10.1 maintenance (all level controller disassembly, sliding brush, stator base cleaning, anti-oxidation treatment. Full frequency changeover switch disassembly, sliding contact cleaning and polishing, anti-oxidation treatment. DC offset adjustment for all channels)
Accessories: module units 0-4, instruction manual (copy)
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg
2/3-way commercial mono channel divider. The time alignment (phase axis) of each speaker unit can be adjusted by delaying the sound with a delay. Can be used for stereo with 2 units. The biggest appeal is that the crossover can be set arbitrarily, so you can create a sound that matches the characteristics of the unit you use and your preferences. It also has professional-like push strength. There are small scratches and dullness on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.9.29 Operation confirmed
2018.12.6 Maintained (operation part, switch, volume disassembly contact cleaning. Power supply parts and other soldering corrections for each print pattern have been reworked. Retighten the transformer and other fixing screws. I checked the filters. Clean the input/output terminals. Operation and output tests are good)
Accessories: copy of instruction manual, power cable
Main specifications: crossover low/80/125/160/250/500/800Hz high/500/1250/1600/5000/8000 Hz W483 x H44 x D 178 mm 4.1 kg/unit
The price has been drastically reduced. 2024/9/21 sales price 198,000 yen All knobs have been maintained, including disassembly and cleaning! Module units 1, 3, and 4 are included. This channel divider is very easy to use. The ease of use of being able to freely change from 2 to 4 ways, including switching the crossover frequency, shines through. The exterior is dull and has small scratches (Wang Zhan)
Maintenance information: 2024.9.19 Maintained (All level controllers have been disassembled, the sliding brush and stator base have been cleaned, and anti-oxidation treatment has been applied. All frequency changeover switches were disassembled, and the sliding contacts were cleaned, polished, and treated to prevent oxidation. The sliding contacts were cleaned after disassembling the low boost rotary switch. (The DC offset for all channels has been adjusted)
Accessories: copy of instruction manual
Main specifications: 2/3/4 way crossover variable frequency Bessel function filter W480 x H80 x D 400 mm 8.5 kg
Maintenance has been completed, including disassembly and cleaning of all knobs. We have all 1 to 4 crossover units! A channel divider that can be configured with multiple amplifiers from 2 way to 4 way. It has good operability, is simple and easy to handle. The sound is clear and sharp. The exterior is dull and has small scratches (Wang Zhan)
Maintenance information: 2024.9.17 Maintained (The power lamp was replaced, all level controllers were disassembled, and the sliding brush and stator base were cleaned and treated to prevent oxidation. After disassembling all frequency changeover switches, the sliding contacts were cleaned, polished, and treated to prevent oxidation. (The DC offset for all channels has been adjusted)
Accessories: instruction manual, crossover units 1 to 4
Main specifications: 2 to 4 way DC unit amplifier configuration Vessel filter level control 0 to -30 dB (1 dB step) output impedance 100 Ω SNR 110 dB W 480 x H80 x D365 mm 7.4 kg