A USHER speaker stand with a marble bottom that can be adjusted in height. It's the perfect size for a small bookshelf. There is dullness and small scratches. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: top plate W200 x D280 mm bottom marble W330 x D 330 mm height 55 cm weight 17.7 kg
Target Audio speaker stand High rigidity due to complete welding and by putting metal fillers such as dry sand or atacama into the struts, the sense of energy and S/N in the mid to low range has been greatly improved. Recommended for LS3/5A, B&W707 series users, etc. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: spikes
Main specifications: top plate W150 x D210 mm W250 x H600 (excluding spikes) x D305 mm 9.5 kg
The price has been reduced. 2026/8/26 sales price 25,000 yen. Arm base compatible with SME 3009, 3010R, etc. compatible with the micro 1500/3000/5000/8000 series. The exterior has strong threads, dullness, and discoloration (Murakoshi Yoichi)
Accessories: none
Main specifications: brass arm base, compatible with SME 3009S2/3009S3, 645 g (actual measurement)
PSE certified product. 4-prong tap with a sturdy steel body. Various functions are built-in, such as a batch switch with a built-in safety breaker and a lightning surge guard function. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.9.8 continuity confirmed
Accessories: none
Main specifications: AC 4 mouth steel tap W110 x D143 x H43 mm 735 g
Comes with original box Audio-Technica's classic disc stabilizer. There is some dullness and rubbing (Murakoshi Yoichi)
Accessories: instruction manual, original box
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
Large signal selector in the System Selector series. Connect to the company's AS-20/AS-20C to switch between power amplifiers and speakers. *Please note that it cannot be used alone (Ryo Mizusaki)
Maintenance information: 2026.9.12 Operation confirmed
Accessories: connection cable
Main specifications: W357xH70xD80mm
The price has been drastically reduced. 2026/9/2 sales price 66,000 yen This is an audio-only router built for network audio. Electrical noise generated by network audio devices due to network load is suppressed, and sound quality is improved and stable operation is achieved. It's a product that pushes your home network system up a notch. In addition to the exterior, 1 OPT AP rubber foot is missing, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2026.9.2 operation confirmed
Accessories: power cable, original box
Main specifications: input/output: LAN (RJ45) terminal, 5 ports, 3 ports for audio, 1 port for wireless AP, 1 port for higher-level routers Communication standards: auto-negotiation 1000Mbps/100Mbps/10Mbps Full input power: 12V/1A, 2.1mm/5.5mm center plus (AC adapter included) W128 x D86 x H34 mm weight 243 g
Power strip 2-port type cable length 5.0 m PSE certified product. This power strip features a heavyweight steel body boasting a thickness of 3.2 mm. You can enjoy clear sound quality with high shielding. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.9.5 continuity confirmed
Accessories: none
Main specifications: W75 x H48 x D160 mm 1.8 kg (actual measurement)
It is inexpensive considering the extent to which knobs are external products, emblems have disappeared, etc. Attenuator for Tokyo Sound Productions. It is a high quality attenuator with detailed and neat sound quality, equipped with the volume of Tokyo Hikone radio waves (Murakoshi Yoichi)
Maintenance information: 2026.9/11 sound output confirmed
Accessories: none
Main specifications: 4 input systems W190 x H78 x D110 mm approx. 1.4 kg
The price has been reduced. 2025/7/16 sales price is 5,000 yen. Oversized stone boards. It looks like granite, but details are unknown. Not beveled or mirrored (Oikawa Tetsuji)
Main specifications: W500 x H30 x D755 mm 33.1 kg (actual measurement)
A record cleaner for Nagaoka. The high-density velvet fits the sound groove of the record board and removes dirt. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Main specifications: body dimensions W115 x D42 x H35 mm 40 g (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2025/3/15 sales price 2,500 yen DENON speaker bracket for ceiling hanging/wall hanging. The speakers are fixed with 2 M5 screws. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: instruction manual
Main specifications: Mountable load up to 5 kg, dimensions between speaker mounting screws (M5) 60 mm, W100 x H146 x D100 mm, 440 g
Unopened item. This is an adhesive record cleaner, rolling cleaner spare for the CL-152. *Please note that quality cannot be guaranteed because it is an old product (Matsumoto Tsuyoshi)
Accessories: none
ONKYO D-500 stand This stand is heavy enough and stable, making it the perfect stand for small bookshelves. There are dullness, threads, and scratches. (TAMURA Eiji)
Accessories: none
Main specifications: top plate W250 x D260 mm W320 x H492 x D340 mm 8.5 kg
PSE certified product. It is a power strip unique to FURMAN equipped with an EMI/RFI noise filter and circuit breaker that reduces noise caused by electromagnetic waves and radio waves. Equipped with 6 3-pin AC outlets (Murakoshi Yoichi)
Maintenance information: 2026.9.8 continuity confirmed
Accessories: none
Main specifications: circuit breaker with PSE mark, ON/OFF switch with built-in light, EMI/RFI noise filter, W235 x H45 x D85 mm, weight 1.25 kg
The price has been drastically reduced! 2026/9/6 sales price 2,800 yen set of 8. Technica hybrid insulators. Special anti-vibration rubber on the top and bottom “Honeynight” uses machined brass as the base material to effectively suppress unnecessary vibrations. The safety design prevents slipping even on light devices. The exterior has a feeling of use over time, and one rubber has been removed (Matsumoto Tsuyoshi)
Accessories: none
Main specifications: 3-layer hybrid structure (hannenite/brass/honeyite) diameter 20 x 11 mm, mass approx. 25 g (per piece), load capacity 5 kg (per piece)
This is a dedicated audio board to maximize the sound quality of SOULNOTE A-0, A-1, A-2, E-1, E-1, and C-1. A depression is created by determining the position of the spike. The spike receiver prevents damage to the installation surface, and can be installed up and down. You can see a feeling of use on the exterior, tape marks, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: 3 spike receptors+3 spike holders sold separately
Main specifications: material/birch wood W460 x H20 x D440 mm 2.7 kg
NAGAOKA stylus cleaner. This is a standard cartridge cleaner product and an easy to use and convenient item. It is a volatile and safe cleaner. The remaining tank is generally full (Tomoho Asaine)
Accessories: none
granite board. The size is suitable for small equipment. It contributes to damping vibrations and tightening the sound. Dullness, scratches, and silicon adhesion can be seen on the exterior (Matsumoto Tsuyoshi)
Accessories: none
Main specifications: outer dimensions W700 x H28 x D400 mm, actual weight measurement 20.3 kg (per sheet)
A heavyweight turntable seat with a unique usage structure. Use by holding down the center with the included stabilizer. It is a turntable sheet that aims to improve the sense of SN and resolution, and the expansion of the amount of information is remarkable. There are fine scratches and dullness on the exterior (Takasaki Atsushi)
Accessories: stabilizer
Main specifications: diameter: 300 mm thickness: 9 mm (maximum part) weight: approx. 1.7 kg accessories: brass stabilizer (150 g)
Ultrasonic cleaner for analog records. Clean the dirt in the grooves with the power of small bursts caused by ultrasonic waves in water. Research has been conducted on ultrasonic waves that can perform more accurate cleaning, and cleaning that can be said to be perfect has been achieved. One of the major attractions of this product is that a total of 4 sheets can be washed simultaneously: 2 12-inch sheets, 1 10-inch sheet, and 1 7-inch sheet. The exterior has a feeling of use such as limescale and dullness (Murakoshi Yoichi)
Maintenance information: 2026.9.11 operation confirmed
Accessories: instruction manual, power cable, dry stand
Main specifications: dimensions W545 x H280 x D320 mm size 9.4 kg
Unspecified conversion throat. The previous owner used it for Altec's 2-inch horn and 1-inch driver joints. There is writing on the 2 inch side mounting surface (Murakoshi Yoichi)
Accessories: none
Main specifications: opening 2 inch side 36mm/1 inch side 26mm W121 x H33 mm
※The wiping sheet is out of stock. Balance washer trial set. This is a set of liquid A for removing dirt and liquid B for protection and antistatic electricity*Please note that quality cannot be guaranteed (Oikawa Tetsuji)
Accessories: none
This is an acrylic overhang gauge for LP records that is convenient for positioning cartridges. (Matsumoto Tsuyoshi)
Accessories: magnifying glass card
Main specifications: size 190 x 40 mm thickness 2 mm
Beautiful item with original box. 3 pcs in 1 set High response quartz insulators. The band balance shifts upward, and it changes to a sound with good S/N that comes out bright and beautiful (Matsumoto Tsuyoshi)
Accessories: original box
Main specifications: straight line 20 mm height 10 mm specific gravity 2.2 g/cm3
Label protector for cleaning records. This product prevents labels from getting wet when cleaning records. By washing with water, it is possible to remove very small dust, etc. that cannot be removed with a cleaner solution (Asaine Tomoho)
Accessories: original box
Main specifications: diameter: 118 mm, thickness: 5.7 mm, weight: 175 g
Beautiful item with original box. 3 pcs in 1 set High response quartz insulators. The band balance shifts upward, and it changes to a sound with good S/N that comes out bright and beautiful (Matsumoto Tsuyoshi)
Accessories: original box
Main specifications: straight line 20 mm height 10 mm specific gravity 2.2 g/cm3
*Spikes are out of stock. This is a steel speaker stand for small to medium speakers. The heavy weight gives it a sense of stability. The exterior is dull and dirty. (TAMURA Eiji)
Accessories: none
Main specifications: W304 x D304 x H388 mm pedestal W279 x D279 mm weight 13.5 kg
Audio-Technica Shell Keeper, commonly known as Tri-Capsule. 3 bottles can be stored with the headshell attached. The exterior has a feeling of use such as dullness and scratches (Asaine Tomoho)
Accessories: none
Main specifications: W152 x H88 x D50 mm 120 g