The price has been reduced. 2026/1/28 sales price 250,000 yen Maintained! Tubular phono equalizer. A careful full-scale design that banishes sound turbidity due to an independent power supply unit. It has an enchanting tone with a sense of depth and depth, which brings out the appeal of cartridges. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.1.27 Maintenance completed (output part vacuum tube replacement, rotary switch, polishing, cleaning, protective agent coating, vacuum tube pin cleaning, power supply voltage check, cleaning, audio check for each input and output)
Accessories: none
Main specifications: tubular phono equalizer amplifier input impedance 2 mV/47 kΩ output impedance 250 mV/600 Ω gain 43 dB input conversion noise -121 dB main unit/W170 x H122 x D330 mm 6 kg power supply/W170 x H122 x D330 mm 7 kg
Maintained! A CP-Y cartridge is included. It is a head amplifier dedicated to electret condenser cartridges (CP-Y) for record playback, which was sold by the company in the 1970s. Since there is no need to move magnets or coils using a method different from MM and MC types, the vibration system is extremely lightweight. As a result, the sound starts up very fast, and it is characterized by a sound with a large amount of information that depicts even fine sound particles. Try it out with classical symphonies, etc. Please enter the input to the amplifier into LINE. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.5 maintained (battery, holder processing replacement chassis cleaning power supply, audio, changeover switch disassembly contact cleaning input/output voice check)
Accessories: CP-Y cartridge
Main specifications: Electret condenser cartridge head amplifier (equalizer) CP-Y exclusive output voltage 300mV (1kHz, when using CP-Y) DC9.6V/24V using rechargeable battery W83 x H106 x D306mm 2.1 kg
This model uses a non-feedback amplifier circuit with discrete components at all stages. High quality parts such as metal film resistors and high quality film capacitors are used in the RIAA circuit. The delicate expressiveness with a smooth, high level of SN typical of recent models is attractive. There is a light scuff on the top surface (Hiura Katsuji)
Maintenance information: 2026.1.15 sound output confirmed
Accessories: power cord
Main specifications: mm/MC compatible non-feedback equalizer amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg
Phase-up current phono equalizer. The essence of an advanced machine was incorporated into the company's long-run model EA-200, and the delicate expressive power with a smooth, high level of SN is alive and well, and spatial expression with a rich amount of information has been refined. The exterior is in good condition with no noticeable scratches (Murakoshi Yoichi)
Maintenance information: 2026.1.15 sound output confirmed
Accessories: power cable, instruction manual
Main specifications: mm/MC non-feedback phono amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg
Maintained! This is the first time in stock in 20 years. A model equipped with a phono equalizer on the GREAT AMERICAN SOUND “GAS” head amplifier and Goliath led by James Bongiorno. A bold American sound that lives up to the manufacturer's name. The gain can be adjusted in 5 levels. There are stains around the gain switch button, and there is a feeling of use appropriate for the entire age (Murakoshi Yoichi)
Maintenance information: 2026.1.13 maintained (internal check, transistor socket, IN/OUT pin jack replacement, both channel AMP output resistors, plastic fit replacement, push SW cleaning)
Accessories: none
Main specifications: MC dedicated phono equalizer, output voltage 2V, gain, 5 stage switching, W481 x H89 x D 248 mm, 4 kg
A phono equalizer that makes it easy to enjoy analog records. You can enjoy an analog record player even with a premain amplifier (preamp) that does not have a PHONO input. The sharp, unobtrusive playback sound is attractive. The exterior has a feeling of use such as the left corner of the top surface and small scratches. Serial 22090948 (Murakoshi Yoichi)
Maintenance information: 2026.1.12 sound output confirmed
Accessories: power cord
Main specifications: input sensitivity 2.5 mV (MM) /0.25 mV (MC) gain 46 dB (MM) /64 dB (MC) input load resistance 47 kΩ (MM) /2 to 47 Ω (MC) W60 × H100 × D230 mm 1 kg
This model uses a non-feedback amplifier circuit with discrete components at all stages. High quality parts such as metal film resistors and high quality film capacitors are used in the RIAA circuit. The smooth, high-SN, and delicate expressive power typical of recent models is attractive (Hiura Katsuji)
Maintenance information: 2026.1.12 sound output confirmed
Accessories: power cable original box
Main specifications: mm/MC compatible non-feedback equalizer amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg
*Currently sold. Tubular phono equalizer compatible with the MM type. Noise is reduced with a separate power supply configuration. The moist luster and warm sound quality are attractive. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2026.1.12 sound output confirmed
Accessories: power supply unit, power cord
Main specifications: MM compatible NF type total gain 36 dB S/N ratio 83 dB vacuum tube 12AX7A [ECC83] x 2, input impedance 47 kΩ output impedance 23 kΩ frequency characteristics 10 Hz to 20 kHz [main body] W100 x H100 x D110 mm 0.6 kg [power supply unit] W130 x H70 x D220 mm 1.8 kg
*Currently sold. A compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input.
Maintenance information: 2025.12.30 Operation confirmed
Accessories: power adapter
Main specifications: W70 x H30 x D92 mm 160 g
*Since the power adapter is not genuine, it is cheap and is currently sold. Audio-Technica's MM/MC compatible phono equalizer. Although it is affordable, it is MM/MC compatible (Oikawa Tetsuji)
Maintenance information: 2026.1.6 operation confirmed
Accessories: Power adapter (non-genuine)
Main specifications: input impedance mm47kΩ/mc100Ω W44 x H105 x D135 mm approx. 460 g
This is a SOULNOTE 10th anniversary model phono equalizer amplifier. The fact that it follows the basic circuit of Ph1.0 while keeping the price down and making it easier to buy is also well received. Vibration countermeasures have also been taken with 3-point support spikes. The freshness is high, and you can enjoy a sense of dynamism and powerful sound. The exterior is dull. 170120015 (Fujisawa Yukishi)
Maintenance information: 2025.12.27 operation confirmed
Accessories: instruction manual, power cord, spikes, tools, original box
Main specifications: input sensitivity MC0.5mV, mm5mV input impedance MC3Ω, 10Ω, 30Ω, 100Ω, 300Ω, 1kΩ/mm7kΩ gain MC70dB, Lmm50dB dimensions W430 × H109 × D409 mm weight 9.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/12/12 sales price 378,000 yen This is the best phono equalizer amplifier developed with the aim of reproducing the deep appeal of analog discs by combining analog technology up until now. The front panel is easy to handle, and can perform everything from impedance adjustment to GAIN adjustment and MM/MC switching, and is finished to create a bold and supple sound. The top plate is rubbed, and there is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2025.12.9 sound output confirmed
Accessories: power cord, instruction manual (copy)
Main specifications: MM/MC compatible phono equalizer independent amplifier configuration dedicated to MM/MC input impedance mm1kΩ, 47kΩ, 100kΩ/mc3Ω, 10Ω, 30Ω, 100Ω, 300Ω, 1KΩ, W465 × H121 × D405 mm 14.5 mm
Phono equalizer compatible with MM/MC type cartridges. How about for an introduction? The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: AC adapter
Main specifications: W95 x D146 x H43 mm weight 450 g
MM/MC compatible A tubular phono equalizer developed with the aim of better analog reproduction. You can enjoy a warm, natural sound using a vacuum tube non-feedback amplifier and a CR-type equalizer. The impedance can be switched according to the cartridge. (TERASHIMA Yuya)
Maintenance information: 2025.12.21 operation confirmed
Accessories: manual, power cable, original box
Main specifications: MM/MC compatible 12AX7 (ECC83) x 2 W300 x H100 x D260 mm 4.8 kg
※ There is no operation problem, but it is currently sold because it is cheap. MM phono equalizer made by Hirakawa Acoustics. The specs and details are unknown, but there are no habits and the sound is straight (Daiki Goto)
Maintenance information: 2025.12.17 operation confirmed
Accessories: none
Main specifications: W150 ✕ H50 ✕ D265 mm weight 1.8 kg
A current phono equalizer amplifier equipped with a balanced input terminal dedicated to MC cartridges and has a fully balanced configuration from input to output. Low-noise bipolar transistors for MC cartridges and low-noise JFETs for MM cartridges are used. It is compatible with various cartridges with a wide variety of MC6 and MM3 load impedances, gain switching, etc. Serial J1Y326 (Murakoshi Yoichi)
Maintenance information: 2025.12.9 sound output confirmed
Accessories: power cord, instruction manual (copy)
Main specifications: input impedance, switching 10Ω, 30Ω, 100Ω, 300Ω, 1kΩ at 1kΩ mm, 1kΩ, 1kΩ size W46 ✕ H114 ✕ D407mm weight 14.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2025/11/29 sales price 278,000 yen It is a phono amplifier that conveys all the information engraved on an analog disc. It consists of 3 circuits: an MC head amplifier, a RIAA amplifier, and an output buffer amplifier, and the all-discrete configuration provides plenty of room for transmission with a high signal-to-noise ratio. You can enjoy modern sound that is clear, has a wide range, and high resolution. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.11.29 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: output impedance 80Ω maximum output level 18V rated output level 500mV gain mm/40dB mC/66dB rated input level input sensitivity mm/5mV mC/0.25mV maximum input level mm/180mV mC/9mV input terminal 2 systems/INPUT1MC/INPUT2MC/MM output terminal 1 system W442 × H103.5 × D364.4 mm approx. 10.5 kg
An authentic phono equalizer amplifier with independent left and right symmetry made in Japan. The warm and relaxing sound typical of analog is compatible with a wide range of cartridges. There is a feeling of use such as dullness on the exterior (Murakoshi Yoichi)
Maintenance information: 2025.12.1 sound output confirmed
Accessories: instruction manual (copy), power cord
Main specifications: mm/MC compatible phono equalizer gain 38 dB (mm) 65 dB (MC) channel separation 100 dB or more, full stage symmetry, no feedback type, rated output voltage 200 mV (1 kHz) W310 x H86 x D316 mm 5 kg
The disposal price has been reduced. Member prices are not applicable. 2025/11/26 sales price 378,000 yen with original box. The best phono equalizer amplifier developed with the aim of reproducing the deep appeal of analog discs by bringing together analog technology up until now. The front panel is easy to handle, and can perform everything from impedance adjustment to GAIN adjustment and MM/MC switching, and is finished to create a bold and supple sound. There is slight friction on the top plate (Oikawa Tetsuji)
Maintenance information: 2025.11.26 Operation confirmed
Accessories: instruction manual, power cable, connection cable, original box
Main specifications: MM/MC compatible phono equalizer independent amplifier configuration dedicated to MM/MC input impedance mm1kΩ, 47kΩ, 100kΩ/mc3Ω, 10Ω, 30Ω, 100Ω, 300Ω, 1KΩ, W465 × H121 × D405 mm 14.5 mm
MM/MC compatible phono equalizer. The characteristics of MC are matched to low impedance. It is mild, has a strong sense of sound, and has a supple tone. The exterior has a feeling of use such as dullness and threads (Mizusaki Ryo)
Maintenance information: 2025.11.23 Operation confirmed
Accessories: instruction manual, power adapter
Main specifications: MC/250 μV/47 ohm mm/2.5 mV/47 kΩ MM/1 system/MC/1 system output voltage 250 mV/300 Ω W123 x H65 x D140 mm weight 1.06 kg
The price has been reduced! 2025/11/18 Sales Price 79,800 yen Luxman's blockbuster MM/MC phono equalizer amplifier boasting high popularity. Clean sound with a good S/N ratio with a 3-circuit all-discrete configuration of MC head amplifiers, RIAA amplifiers, and output buffer amplifiers. You can enjoy a supple and relaxed sound. The exterior has a feeling of use such as dullness and small scratches. Serial 41050104 (Takahashi Nobuyuki)
Maintenance information: 2025.11.20 Operation confirmed
Accessories: none
Main specifications: mm/MC independent NF type equalizer gain mm36dB MC62dB input sensitivity mm4mV/MC0.2mV compatible impedance mm10kohm or less/MC40Ω or less input impedance mm50kΩ/mc200Ω w126 × H183 × D421 mm 6.8 kg
*Currently sold. A basic model of the project's best-selling phono equalizer series PHONO BOX. Although it is inexpensive, it is also possible to switch between MM/MC. The compact chassis is not bulky even when placed next to the player, and the high sound quality is attractive (Tetsuji Oikawa)
Maintenance information: 2025.11.16 Operation confirmed
Accessories: power adapter
Main specifications: input impedance MC100Ω, mm47kΩ input gain mm40dB, MC60dB W103×H36×D104 mm 570g
*Currently sold. Comes with original box Audio Alchemy's compact phono equalizer. MM/MC and load resistance can be switched internally. It is currently set to MC. It sounds pretty good (Oikawa Tetsuji)
Maintenance information: 2025.11.12 Operation confirmed
Accessories: power adapter, instruction manual, original box
Main specifications: mm/MC compatible phono equalizer gain mm32dB MC50/60dB W140 x H35 x D109 mm 0.7 kg
REGA phono equalizer for MM. It is the successor to the Fono MM, which was described as “perfect,” and the MM's circuit configuration and sound quality have been further improved. Uses high-quality polypropylene capacitors for audio. A muse op amp with a high sound quality evaluation is used in the RIAA circuit, and the RIAA curve is drawn correctly. (TAMURA Eiji)
Maintenance information: 2025.11.7 operation confirmed
Accessories: instruction manual, original box, AC adapter
Main specifications: input sensitivity 1.7 V input load 47 kΩ maximum input level 60 mV gain 41.4 dB minimum output load resistance (recommended) 5K frequency characteristics 13 Hz to 100 kHz W180 ✕ H50 ✕ D155 mm
Fidelix MM/MC compatible phono equalizer. The amplifier section uses an all-FET NFB type. The equalizer curve is variable, and it is possible to switch between 5 levels of low frequency characteristics of 50 Hz or less and high frequency of 2 kHz or more, respectively. In addition to RIAA, it is compatible with SP, NAB, AES, FFRR, old RCA, and COLUMBIA, and is equipped with a total of 25 types. In addition to slight discoloration on the exterior and upper part of the power supply unit, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2025.11.3 operation confirmed
Accessories: instruction manual (copy), power supply unit, ground banana plug, 2 short pins
Main specifications: input impedance MC · 1 gΩ or 330 Ω/mm · 47 kΩ output impedance RCA 100Ω/XLR · 200Ω gain MC · 65dB/mm40dB main unit W150 x H50 x D250 mm approx. 1.2 kg power supply approx. W65 x H50 x D130 mm weight approx. 0.6 kg
Comes with power supply PLS-226. Official MC version of Harman International. Easy-to-use specifications with late-model RCA input/output. The overwhelming amount of information that feels amazing is truly a masterpiece. This discrete combination creates a sharp, deep tone unique to Levinson. There is a small line scratch on the top plate on the exterior. Serial 1812/4647 (Takahashi Nobuyuki)
Maintenance information: 2025.11.3 operation confirmed
Accessories: power cable
Main specifications: Herman International regular imported product MC version late model RCA input/output specification dimensions W193 x H78 x D 333 mm weight 3.0 kg
Genuine Stellar product, MM/MC specification, early model with handle. Goldmund's rare phono equalizer. It has a beautiful sound like thin, clear air, and an exquisite sense of echo is impressive. You can listen to the lively and glossy sound of Goldmund. The exterior is dull and has a feeling of use. Serial 28-12-00 (Takahashi Nobuyuki)
Maintenance information: 2025.11.3 sound output confirmed
Accessories: power cable
Main specifications: mm/MC dimensions W483 x H44 x D335 mm weight 5 kg
*Currently sold. Tubular phono equalizer compatible with the MM type. Noise is reduced with a separate power supply configuration. The moist luster and warm sound quality are attractive. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2025.11.1 operation confirmed
Accessories: power supply unit
Main specifications: MM compatible NF type total gain 36 dB S/N ratio 83 dB vacuum tube 12AX7A [ECC83] x 2, input impedance 47 kΩ output impedance 23 kΩ frequency characteristics 10 Hz to 20 kHz [main body] W100 x H100 x D110 mm 0.6 kg [power supply unit] W130 x H70 x D220 mm 1.8 kg
※Since the top plate is corroded, it is inexpensive. An authentic phono equalizer amplifier with independent left and right symmetry made in Japan. The warm and relaxing sound typical of analog is compatible with a wide range of cartridges. There is dullness etc. on the front panel and top plate (Oikawa Tetsuji)
Maintenance information: 2025.10.30 Operation confirmed
Accessories: power cable
Main specifications: mm/MC compatible phono equalizer gain 38 dB (mm) 65 dB (MC) channel separation 100 dB or more, full stage symmetry, no feedback type, rated output voltage 200 mV (1 kHz) W310 x H86 x D316 mm 5 kg