K's series premain amplifiers designed to play music by narrowing down the necessary functions to the minimum required. Equipped with a relay-type CD direct function so that you can listen to CDs with higher sound quality, it creates natural deep bass. The exterior has a feeling of use such as dullness and stickiness. Serial 40600005 (Asaina Satoshi method)
Maintenance information: 2023.10.12 sound output confirmed
Accessories: none
Main specifications: Rated output 40W+40W (8Ω) Rated power consumption 100W Maximum external dimensions 270 x 136 x 346 mm Weight 7.6 kg
The price has been reduced! 2023/10/9 sales price 10,000 yen K's series CD player with DAC7 introduced into the D/A converter section. A discrete buffer amplifier was added to the final stage of the audio circuit to enable low impedance output. The exterior has a feeling of use such as dullness, small scratches, and stickiness (Asaina Satoshi Law)
Maintenance information: 2023.10.9 sound output confirmed
Accessories: none ※remote control not included
Main specifications: rated power consumption 10 W, maximum external dimensions 270 x 98 x 316 mm, weight 4.6 kg
An aluminum alloy headshell attached to the KP-9010, KP-1100, etc. Recommended for those who use Kenwood players (Tetsuji Oikawa)
Accessories: none
Main specifications: Own weight approx. 11g
An aluminum alloy headshell attached to the KP-9010, KP-1100, etc. Recommended for those who use Kenwood players (Tetsuji Oikawa)
Accessories: none
Main specifications: Own weight approx. 11g
An aluminum alloy headshell attached to the KP-9010, KP-1100, etc. Recommended for those who use Kenwood players (Tetsuji Oikawa)
Accessories: none
Main specifications: Own weight approx. 11g
※Since it is inexpensive, it is currently sold. K's series parametric equalizer. A geeky product that can adjust frequency, level, and Q curve in each high, medium, and low frequency band. A Q curve is a unit representing the sharpness of an equalizing curve, and can be adjusted in both wide and narrow directions. The exterior has small scratches, dullness, etc., and a feeling of use. Serial 81100182 (Asaina Satoshi method)
Maintenance information: 2023.10.8 Operation confirmed
Accessories: instruction manual
Main specifications: parametric equalizer variable level 10 dB before and after (11 steps), adjustment center frequency/Low31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315 Hz Mid: 160, 200, 315, 400, 500, 630, 800, 1000, 1250, 1600 Hz High1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 , 12500, 16000 Hz Frequency Characteristics 10 to 70,000 Hz Input Impedance 47 kΩ Output Impedance 2.2 kΩ Rated Power Consumption 6 W Size W270 x H80 x D328 mm Weight 3.4 kg
※There is no problem with operation, but since there are places where the decorative board is shrunk, it is inexpensive, and it is left as is. A speaker developed in pursuit of a point sound source. The sound is sharp and clear. The sound is slightly tight, and it sounds well even in the low frequencies. A car that shines with its good cost performance. There are tape marks, stains, etc. (Oikawa Tetsuji)
Maintenance Information: 2023.9.9 Operation confirmed
Main specifications: 2 way, 2 speaker, bass reflex system, bookshelf type, antimagnetic design, frequency band 45 Hz to 30,000 Hz, 6 ohms, 85 dB, W216 x D326 x H352 mm, 8 kg
Full refreshment maintenance has been completed, including the creation of a new dust cover! Famous Kenwood machines known only to those in the know. It has excellent stability and operability supported by a sturdy die-cast aluminum frame, and is also equipped with an auto lift-up, making it extremely easy to use. The exterior is dull and there is a feeling of use (Hiura Katsuji)
Maintenance information: 2023.8.28 Maintenance (dust cover creation, motor bearings, arm lifter grease up. Disassemble the arm for cleaning and adjustment. Tact SW, electrolytic capacitor, rectifier diode replacement. Resolder the board. Tonearm shaft bearing replacement Dust cover hinge reinforcement bracket made. Check turntable rotation speed and arm needle pressure. Check the sound output. Simple exterior cleaning, comprehensive operation verification inspection.)
Accessories: instruction manual
Main Specifications: Quartz Rock Direct Drive Static Balance Type Tone Arm Auto Lift Up Mechanism Dimensions W490 x H182 x D410 mm Weight 13.7 kg
The price has been reduced. 2022/6/25 Sales price 19,800 yen ※Since it is cheap, it is currently sold. K's series parametric equalizer. A geeky product that can adjust frequency, level, and Q curve in each high, medium, and low frequency band. A Q curve is a unit representing the sharpness of an equalizing curve, and can be adjusted in both wide and narrow directions. There are bumps, abrasions, etc. (Daiki Goto)
Maintenance information: 2023.6.25 Operation confirmed
Accessories: none
Main Specifications: Parametric Equalizer Variable Levels: Front and Rear 10dB (11 steps) Adjustment Center Frequency/Low: 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315 Hz Mid: 160, 200, 315, 400, 500, 630, 800, 1000, 1250, 1600 Hz High: 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, 8000, 10000, 12500, 16000 Hz Frequency Characteristics: 10 to 70,000 Hz Input Impedance 47 kΩ Output Impedance 2.2 kΩ Rated Power Consumption 6 W Size W270 x H80 x D328 mm Weight 3.4 kg
※The lead wire is missing. This is a genuine shell for Kenwood's KP-9010 record player. Since it is a universal type, it can also be used with other record players. Shells are rarely sold separately, so if you are a KP-9010 user, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance Information: 2023.8.20 Conductivity Confirmed
Accessories: none ※lead wire missing
Main specifications: Self-weight 11.2 g (actual measurement)
※Shipping service. No. 62 Special Feature = Japanese Sound · Japanese Speaker Listen to its Appeal/Professional Sound Creation · Uesugi Yoshiro /Death of a Person Who Draws Sounds = Remembering Fuyuki Segawa/Professional Sound Creation = Yoshiro Uesugi/Published 1982.4.15. Posted models: MCINTOSH/C33 DENON/PRA-6000 THORENS/TD226+TP16W/ESOS+SME3012R W/LIFT, TDP226+SME3009R W/LIFT+TP997 W/ESOS ACOUSTAT/MODEL THREE COUNTER POINT/SA-1 DENON/DL-1000 VICTOR/MC-L10 KENWOOD/L- 02A, L-02T DYNAVECTOR/DV/KARAT 17D TECHNOICS/305MC MK2 STAX/ELS-81F JENSEN/SYSTEM-B PRO MONITOR WHAFEDALE VICTOR/A-X77 YAMAHA/A-7A ESPRIT/TA-E901 STAX/DA-50M MICHAELSON&AUSTIN/TVP-X LUXMAN/ PD310 NAKAMICHI/TX-1000 MICRO/BL-81 SAE/P101, T101, E101, A1001, A501, A201 PIONEER/PT-R7_3 S57.4.15 was issued. The photograph is a sample, so the actual product may be broken, or there may be markings etc.
*Currently sold. An affordable digital FM/AM tuner. A model that improved reception performance at low frequencies, which was a weak point of synthesizer tuners, with a direct linear reception circuit. It is also equipped with a memory function, and it is a car that also has functionality. There is a feeling of use, such as scratches on the display panel and line scratches on the top plate. Serial 10400013 (Itsuro Mizushima)
Maintenance Information: 2023.8.1 Operation confirmed
Accessories: none
Main specifications: FM/AM tuner W440 x H98 x D318 mm 4.3 kg
*Currently sold. Compact CD/MD receiver An all-in-one model that includes a CD player, MD recorder, and FM/AM tuner. It also has external analog/digital input terminals, so you can enjoy straightforward sound that feels good to the ear. The exterior has dark spots and small scratches. Serial 70500060 (Yonejima Satoshi)
Maintenance information: 2023.7.31 Operation confirmed
Accessories: remote control
Main specifications: frequency characteristics 20 Hz to 20 kHz renewable disc MD, CD, CD-R, CD-R, CD-RW FM reception frequency 76 to 90 MHz AM reception frequency 531 to 1629 kHz W270 x H126 x D368 mm 6.1 kg
An aluminum alloy headshell that was attached to the KP-9010, KP-1100, etc. Recommended for those who use Kenwood players. (TAMURA Eiji)
Maintenance Information: 2023.7.19 Continuity Confirmed
Accessories: There are no accessories
Main specifications: dead weight 11g
*Currently sold. The remote control is missing. K's series premain amplifier. Despite its compact size, it has solid driving power and is recommended for subsystems, etc. This is a very cost effective premain amplifier (Fujisawa Yukishi)
Maintenance Information: 2023.6.28 Operation confirmed
2013.4.12 Maintained (main amplifier circuit relay replacement and transistor solder correction, each input/output inspection, volume, SW cleaning, etc. operation inspection)
Accessories: none
Main Specifications: 40W+40W (6Ω) Dimensions W270 x H143 x D345 mm Weight 7.1 kg
Although it is a speaker for components, you can fully enjoy the smooth, natural sound quality. The overall balance between the tight low frequencies and the overall balance is good, making this speaker easy to use. The wood-like design also comes in handy as a small interior decoration. The exterior has a feeling of use, and the sticker on the back is about to peel off (Sasaki Shota)
Maintenance information: 2023.6.22 Sound output tested
Accessories: none
Main specifications: W164 x H284 x D242 mm Weight 4.2 kg
An easy-to-use synthesizer-type FM/AM tuner. The clear sound quality makes it easy to listen to, and there are no problems with reception sensitivity or stereo reception. The exterior rubs against the top plate, and there is an overall feeling of use, but there are no major scratches. ※The LCD display is slightly dark (Kobayashi Hitoshi)
Maintenance Information: 2023.6.19 Operation confirmed
Accessories: none
Main specifications: stereo synthesizer FM/AM tuner FM reception frequency range 76 MHz to 90 MHz AM reception frequency 531 kHz to 1602 kHz rated power consumption 15 W size W440 x H97 x D331 mm weight 4.5 kg
An aluminum alloy headshell that was attached to the KP-9010, KP-1100, etc. It's well-made and seems to match other companies' arms. There is a slight dullness and a feeling of use (Murakoshi Yoichi)
Maintenance Information: 2023.6.18 Continuity Confirmed
Accessories: none
Main specifications: dead weight 11g
※There is no problem with operation, but since it is inexpensive, it will be handed over as is. 11cm 2-way speaker system. Although it is compact, it is attractive that it is well built for more than the price. You can easily use it for TV audio, subsystems, etc. (Sasaki Shota)
Maintenance information: 2023.6.22 sound output operation confirmed
Accessories: none
Main specifications: speakers used: 11cm cone type woofer, 2.5cm concave dome tweeter, bass reflex system input, 30W, W150 x H275 x D277 mm, 3.9 kg
The price has been reduced. 2023/5/21 sales price 34,800 yen*Since digital input circuit modules cannot be repaired, they are inexpensive. Kenwood premain amplifiers. It plays the clear, transparent mid to high frequencies and low frequencies with a firm sense of power typical of Kenwood in a well-balanced manner. The exterior is dull and scratched. Serial 48K10089 (Tamura Eiji)
Maintenance information: 2023.5.21 Maintained (indicator lamp replaced. Switch and volume contact correction. (*The digital circuit module is faulty, but digital cannot be used because it is unobtainable)
Accessories: no accessories
Main specifications: 150W+150W (8Ω) phonomc/mm equipped damping factor 1000 (50 Hz) W476 x H170 x D424 mm weight 19.7 kg
Maintained! Create a new dust cover. The KP-1100 boasted the best cost performance among record players under 100,000 yen at the time. An X-shaped die-cast frame in which the arm and motor are integrated with a strong frame is used. It is an easy-to-use car equipped with an auto lift-up function (Murakoshi Yoichi)
Maintenance information: 2023.5.30 maintenance (removal of motor parts, cleaning and lubrication of shafts and bearings. Tact SW on the operation unit, electrolytic capacitors on the internal board, and rectifier diodes were replaced with new products. Resolder the board. Remove the area around the arm, disassemble, clean each part, replace the shaft bearing, inspect the internal lead wire, and reassemble. Dust Cover Hinge Reinforcement Brackets Created Exterior cleaning, speed check, operation test of each part, sound output test.)
Accessories: none
Main specifications: high rigidity unified frame direct drive DL motor, 90dB SNR, aluminum die-cast turntable, 1.9 kg, needle pressure 0 to 3 g, W490 x H182 x D410 mm, weight 14.5 kg
※It is cheap because it is in poor condition. There is no problem with the sound output, but there is a slight gap in ATT. KENWOOD 4-WAY 4 SPEAKERS There are many abrasions on the exterior and top plate, scratches on the corners, corrosion and discoloration on the unit frame, etc., and there is a feeling of use
Maintenance information: 2023.5.26 operation confirmed (sweep test OK, ATT has a slight gap)
Accessories: saran net
Main specifications: 4-way, 4 speakers, bass reflex system, bookshelf type, anti-magnetic design, low range: 27 cm cone type mid to low range: 10 cm cone type mid to high range: 5 cm semi-dome type high range: horn type playback frequency band 28 Hz to 47 kHz
Maximum input 170 (EIAJ) impedance 6 ohms output sound pressure level 91 dB/W/m crossover frequency 600 Hz, 4 kHz, 8 kHz W315 x H530 x D332 mm 16 kg
Disposal prices have been reduced. Member discounts do not apply. 2023/1/8 sales price 1,500 yen. *Currently on sale. Kenwood tweeter double magnet construction Cone type tweeter The exterior is torn, dull, etc., and there is a feeling of use (Katsutsugu Hiura)
Maintenance information: 2023.1.8 sound output confirmed
Accessories: grill
Main specifications: impedance 4 ohms (actual measurement) W122H122D690mm screw pitch (diagonal) 125 mm weight 0.45 kg
An aluminum alloy head shell that came with the KP-9010, KP-1100, etc. It is well-made and seems to match arms from other companies (Murakoshi Yoichi)
Maintenance information: 2023.5.14 sound output confirmed
Accessories: none
Main specifications: own weight 11g
The price has been reduced. 2023/4/23 sales price 59,800 yen Maintenance completed! A mono amplifier that produces extremely smooth, straight sound. There are few quirks and it's reasonable, so it's a model I definitely want domestic speaker users to listen to. The exterior has scratches scattered on the front and sides, and you can feel the overall feeling of use (Murakoshi Yoichi)
Maintenance information: 2023.4.22 maintenance (speaker relay, 16 transistor replacement transistors replacement, idling, DC balance adjustment, sound output confirmation test. The same parts were replaced and repaired on both cars.)
Accessories: manual copy
Main specifications: 120W (8Ω) W200×H165×D400mm 8.7 kg/unit
*Currently on sale. Details of Kenwood's full-range unit pair characteristics are unknown, but I was able to sweep and make sounds. The exterior is slightly dull (Hiura Katsutsugu)
Maintenance information:2023.2.5 sound output confirmed
Accessories: none
Main specifications: W130 x H130 x D62 mm (actual measurement) screw pitch (diagonal) 137 mm weight 664 kg
A Kenwood 3-way bookshelf that evokes the good times. The lively sound makes a good impression. As an introductory machine, how about using it as a sub machine? There is a screw hole on the top surface, and there is a lot of feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2023.4.28 sound output confirmed
Accessories: saran net
Main specifications: 3-way, 3-speaker, bass reflex system, bookshelf type, anti-magnetic design, playback frequency band, 30 Hz to 40 kHz, impedance 6 ohms, output sound pressure level, 91 dB, crossover frequency 600 Hz, 5 kHz, W315 x H530 x D277 mm, weight 13 kg
Maintained! Sigma cable included! Kenwood's last varicon-type analog tuner developed by utilizing the know-how of the L-02T. The full, vivid sound quality in the mid-range typical of the L series is attractive. The reception sensitivity is astonishingly Kenwood. There are scratches, fading, etc. on the top plate (Oikawa Tetsuji)
Maintenance information: 2023.4.19 Maintained (Bearing cleaning contact grease was applied due to varicon noise. The RF tracking has been adjusted. The separation has been adjusted. The panel stains have been cleaned. I checked the switch and volume. I attached it because it doesn't have legs)
Accessories: copy of instruction manual, Sigma cable
Main specifications: non-spectrum IF method reception frequency 76 MHz to 90 MHz antenna impedance 75 ohms (unbalanced) multipath output W440 x H111 x D337 mm 5.4 kg
Kenwood speaker stand. Exquisitely designed to be short for bookshelves. The dimensions are perfect for those who want to sit and listen in a Japanese-style room (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate 190 x 190 mm W280 x H261 x D297 mm 3.4 kg
※There is no problem with operation, but since it is inexpensive, it will be handed over as is. An FM/AM tuner that incorporates many of the company's unique technologies in synthesizer tuners to achieve more stable reception and higher sound quality. The fact that it comes with a dial that allows you to enjoy the feeling of a varicon is also attractive. The exterior has dullness and line marks. Serial 58K10307 (Kimiya Miura)
Maintenance information: 2023.3.24 operation confirmed
Accessories: copy of instruction manual
Main specifications: FM/AM tuner reception frequency range 76 MHz to 90 MHz antenna impedance 75 ohm unbalanced W440 x H88 x D331 mm 4.5 kg
Maintained! Kenwood's L-01T is still popular! This is an FM tuner that uses a non-magnetic housing. It has a soft, enveloping sound that is characteristic of varicones. The luxurious construction aimed at excellent performance as a communication device and improved sound quality as an audio device is truly remarkable. The exterior has small scratches and dullness over time. Serial 0080574 (Satoshi Yonejima)
Maintenance information: 2023.3.16 Maintained (AF circuit electrolytic capacitor replacement. RF tracking adjustment. Separation adjustment. Internal cleaning. Switch contact cleaning. Reception operation check.)
Accessories: copy of instruction manual
Main specifications: FM dedicated tuner reception frequency range 76 MHz to 90 MHz antenna impedance 75 ohms unbalanced W440 x H136 x D452 mm 9.1 kg
Maintained! Kenwood's L-01T is still popular! This is an FM tuner that uses a non-magnetic housing. It has a soft, enveloping sound that is characteristic of varicones. The luxurious construction aimed at excellent performance as a communication device and improved sound quality as an audio device is truly remarkable. There are small scars and dullness over time (Oikawa Tetsuji)
Maintenance information: 2023.3.2 Maintained (The power cord has been replaced. The electrolytic capacitor was replaced. RF tracking adjustments, detection transformer adjustments, and separation adjustments were made. (I checked the reception operation)
Accessories: instruction manual
Main specifications: FM dedicated tuner reception frequency range 76 MHz to 90 MHz antenna impedance 75 ohms unbalanced W440 x H136 x D452 mm 9.1 kg
There is no problem with the sweep test, but since the condition is poor, such as a dent in the saran net on one side, it is currently sold. A compact speaker from KENWOOD. In addition to the exterior and above, a feeling of use can be seen, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.11.13 operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker, bass reflex system, 10 cm, full range speaker equipped with allowable input, 40 W impedance, 8 ohms, output sound pressure level, 89 dB, W230 x H150 x D166 mm, 1.6 kg
※There is no problem with operation, but since it is inexpensive, it will be handed over as is. Small bass reflex 2-way speaker It has a coherent sound quality unique to 2-way, and can be used for various purposes such as subs, rear, etc. There is a scratch on the top plate and a line scratch on the side (Daiki Goto)
Maintenance information: 2023.2.28 operation confirmed
Accessories: none
Main specifications: 2-way bass reflex frequency band 50 Hz to 30 kHz crossover 2.5 kHz impedance 6 ohms maximum input 80 W sound pressure level 83 dB dimensions W158 x H270 x D262 mm weight 4.0 kg/book
Since it is inexpensive, it is currently sold. Kenwood 2-way speaker. The size that can be placed freely without worrying about space is attractive. There are scratches and dents on the net (Daiki Goto)
Maintenance information: 2023.2.28 operation confirmed
Accessories: none
Main specifications: W230 x H150 x D166 mm 2.2 kg
*Currently on sale. Comes with a dedicated stand SG-11! Kenwood's compact 3-way. I recommend it to those who can't place large speakers and are dissatisfied with the 2-way bookshelf type they have. I think it's compatible with all genres without blurring the outline. As for the external condition, there is a feeling of use such as scratches, dullness, and rubbing over time. Serial 50700075 50700075 (Yamato Yuki)
Maintenance information: 2023.2.13 operation confirmed (good sweep test)
Accessories: Saran net stand (SG-11)
Main Specifications: 3-Way 3-Speaker Bass Reflex Bookshelf Type Anti-Magnetic Design 6Ω 89dB W228 x H403 x D276 mm Weight 8.8 kg Stand Dimensions Base W280XH490xD295mm
Top plate W190xD190mm stand weight 3.5kg
Careful maintenance has been completed, from lubricating the moving arm and motor shaft to replacing the internal board condenser! A masterpiece model of a semi-auto player. The torque and braking power of the motor are excellent, and the sense of stability of operation is impressive. Sound quality that is delicate and has an excellent sense of resolution brings out the performance of the cartridge (Yoichi Murakoshi)
Maintenance information: 2022.2.5 maintenance completed (motor part removal, shaft and bearing cleaning and lubrication, operation unit tact SW/internal board electrolytic capacitor/rectifier diode replacement, board re-soldering, removal and disassembly around the arm, various parts cleaning after removing and disassembling around the arm, shaft bearing replacement, internal lead wire inspection, reassembly, dust cover hinge reinforcement bracket creation, cabinet scratch polishing, exterior cleaning, speed check, operation test for each part, sound output test)
Accessories: instruction manual (copy)
Main Specifications: Quartz Lock DD Drive Auto Lift Up Static Balance Compatible Cartridge Weight 2 to 12 g Needle Pressure Range 0 to 3 g W490 x H182 x D410 mm 14.5 kg
*Currently on sale. It is a 2-way speaker that uses a soft dome, released as a Cisco K's series speaker. It has relaxed low frequencies and soft mid to high frequencies, so you won't get tired of listening to it. There is a feeling of use such as peeling and small scratches on the veneer (Itsuro Mizushima)
Maintenance information: 2023.1.9 operation confirmed
Accessories: saran net
Main specifications: 2-way 2-speaker bass reflex system anti-magnetic type 8ohm W210 x H348 x D308 mm 7.87 kg/book
Speaker cable 3.0 m pair end treatment This is a speaker cable that seems to have been originally included with the company's speakers. The exterior is dirty, dull, and there is a feeling of use (Katsutsugu Hiura)
Maintenance information: 2023.1.9 Confirmation confirmed
Accessories: none
The price has been reduced. 2022/12/29 sales price 69,800 yen maintenance completed! KENWOOD's last premium tuner. The thickness of the sound, which you wouldn't think of as a synthesizer tuner, and the crisp, warm tone are comfortable and perfect for long periods of time to enjoy. Unlike the varicocon type, it's thin and doesn't take up much space, which is also attractive. As for the exterior, there are several scratches on the top plate, dullness, sidewood deterioration, etc. Also, legs are attached to the bottom. Serial 69K10868 (Satoshi Yonejima)
Maintenance information: 2022.12.29 Maintained (IF detection transformer condenser cleaning adjustment. RF tracking adjustment. Adjust each part of the separation misalignment. Visual check of capacitors, switches, etc. Reception operation check)
Accessories: copy of instruction manual
Main specifications: using a pentacle circuit, W475 x H88 x D327 mm, weight 6 kg
*There is no problem with operation, but since it is inexpensive, it is currently sold. Small compact receiver. This is a convenient receiver that makes it easy to enjoy CDs and tuners with just one. Enjoy music easily for BGM purposes etc. The exterior is dull. Serial 706000006 (Satoshi Yonejima)
Maintenance information: 2022.12.29 operation confirmed
Accessories: remote control, FM/AM antenna
Main specifications: W270 x H126 x D368 mm 5.8 kg
There is no problem with operation, but since it is inexpensive, it is currently sold. A KENWOOD CD player that uses a Philips D/A converter (DAC7). It has a calm tone, no quirks, and is compatible with a wide range of genres. There is a feeling of use such as blurred letters on the front, scratches and dullness overall (Daiki Goto)
Maintenance information: 2022.12.13 operation confirmed
Accessories: remote control
Main specifications: W440 x H127 x D319 mm 6.5 kg
The price has been reduced! 2022/10/16 sales price 4,980 yen*This product is currently sold because it is cheap. Kenwood AMFM tuner. The model has stable sound and is easy to use. The exterior has a feeling of use such as dullness and small scratches, and the display is dark. Serial 60940370 (Takahashi Nobuyuki)
Maintenance information: 2022.10.16 operation confirmed
Accessories: AM antenna
Main specifications: W440 × H93 × D379.5 mm 3.3 kg
*Currently sold. A stereo cassette deck that employs a 3-head mechanism with a combination head. The combination head, which has been carefully adjusted for azimuth, height, and tilt, can be a simple driving system where only the combination head and the erasing head fit between capstan and capstan, and it demonstrates excellent tape pass performance. The exterior has a feeling of use such as dullness. Serial 6YL10567 (Asane Tomonori)
Maintenance information: 2022.11.28 Operation confirmed (recording/playback check OK)
Accessories: none
Main Specifications: Frequency Characteristics Normal Tape 20Hz to 18000Hz ±3dB Chrome Tape 20Hz to 19000Hz ±3dB Metal Tape 20Hz to 22000Hz ±3dB SNR Ratio EIAJ Metal Tape 57dB Dolby C on 75dB Dolby B on 68dB Dolby NR off 60dB Size W440xH111xD322mm Weight 6.2 kg
KENWOOD's last premium tuner. The thickness of the sound and the clear, warm tone that you wouldn't think of a synthesizer tuner is comfortable, and it's perfect for enjoying for a long time. Unlike the varicon type, it is also attractive that it is thin and does not take up much space. As for the exterior, there are several scratches on the top plate. Also, there are legs attached to the bottom. Serial 69K10868 (Satoshi Yonejima)
Maintenance information: 2022.11.23 operation confirmed
Accessories: instruction manual
Main specifications: Pentacle Circuit adopted size W475 x H88 x D327 mm Weight 6 kg
There is no problem with operation, but since it is inexpensive, it is currently sold. A KENWOOD CD player that uses a Philips D/A converter (DAC7). It has a calm tone, no habit, and is compatible with a wide range of genres of sources. The appearance, dullness, and rubbing can be seen (Kobayashi Hitoshi)
Maintenance Information: 2022.11.13 Operation confirmed
Accessories: remote control
Main specifications: W440 × H127 × D319 mm 6.5 kg
Maintained! Create a new dust cover. The KP-1100 boasted the best cost performance among record players under 100,000 yen at the time. Uses an X-shaped die-cast frame that integrates the arm and motor with a strong frame. It is an easy to use one that is equipped with an auto lift-up function. The exterior has been beautifully finished through maintenance. Serial 5YL40119 (Takahashi Nobuyuki)
Maintenance Information: 2022.10.21 Maintained (Zener Diode Replacement Motor Part Removal Shaft and Bearing Cleaning Lubrication Operation Part Tact SW Internal Board Electrolytic Capacitor Rectifier Diode Brand new replacement. Re-solder the circuit board. (Remove the arm circumference, disassemble each part, clean the shaft bearing, replace the internal lead wire, inspect and reassemble, dust cover, hinge, reinforcement bracket, exterior cleaning, rotation speed check, operation test, sound test)
Accessories: copy of instruction manual
Main Specifications: High Rigidity Unified Frame Direct Drive DL Motor SNR 90dB Aluminum Die-Cast Turntable 1.9kg Needle Pressure 0-3g W490 x H182 x D410 mm Weight 14.5 kg