Maintained! Comes with a remote control. A CD player developed to commemorate the 100th anniversary of Philips's founding. The sound is soft and relaxed, and the thickness of the analog-like mid-low range is particularly irresistible. A swing-arm CDM-4 mechanism is used for the mechanism part, and TDA1547 (DAC7) is used for the D/A conversion part to achieve advanced S/N improvements. As for the exterior, there are bald spots and stains on the SW area. MZ019204080075 (Tamura Eiji)
Maintenance information: 2024.6.9 Maintained (both tray slide belt and CD standby motor belt replaced. Other CD mechanisms, drive circuit check, reading check OK, remote control check OK)
Accessories: remote control, lock pin
Main specifications: CDM-4 mechanical DAC7 equipped analog output 2 systems (XLR/RCA) 2 digital output systems (optical/coaxial) W457 x H140 x D359 mm 16.7 kg
Maintained! ※It has been changed to an RCA terminal. Marantz's masterpiece CD player equipped with the Philips swing-arm mechanical CDM-1. The sound is rich, analog-like. It has the same feeling of use as time has passed (Daiki Goto)
Maintenance information: 2024.6.8 maintained (slide motor belt NG → replaced. There is poor thru-hole soldering in the decoder board → all re-soldered. Bypass C NG in other servo boards → replace. ~ CD mechanical turntable motor bearing concave → correction ~ reading check)
Accessories: copy of the manual
Main specifications: Philips swing arm mechanism equipped with CDM-1 14 bit DAC W320 x H90 x D300 mm 7 kg
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
2024.4 Maintained! Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a higher frequency extension than the A730, and the overall balance from bass to treble is good, and the sound has a solid sense of sound pressure. There is dullness and small scratches all over the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 Maintained (CD mechanical pickup is movable by checking, dismantling, check assembly → reading OK. All other internal parts of the NG part have been replaced. CD disc plate replacement ~ aging test 6 days ~)
Accessories: power cord, instruction manual (copy)
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
This model is limited to 200 units equipped with the highly acclaimed Philips 1-beam swingarm mechanism CDM9PRO. While inheriting the soft and thick sound of CD-23, the straightforward, flat, and well-balanced sound quality is attractive. As for the exterior, there is paint peeling around the legs. Serial MZ009644080005 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: Philips 1 beam swing arm mechanism with CDM9PRO, 1 input/output terminal/digital coaxial output system, 1 digital optical output system, 1 analog unbalanced output system, 1 digital coaxial input system, 1 digital optical input system, dimensions W250 x H124 x D281 mm, weight 6.3 kg
Pair tube double triode tube, made in America, JAN measurement value 80/76 (rejected value 32) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube double triode tube, made in America, JAN measurement value 74/72 (rejected value 32) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. In addition to being able to see many scratches on the exterior and top plate and abrasions on the front panel, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (flat cable adjustment) 2024.4.13 manufacturer maintained (belt replacement, deteriorated parts replacement, inspection and adjustment of various parts)
Accessories: remote control, copy of instruction manual, lock key
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Pair tube, ambient heat beam tube, made in America, JAN measurement value 42/40 (rejected value 25) with white box ※Pairs are determined based on GM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, 6L6GC compatible ball, high reliability tube, made in America lot: 8526/8526 measured value 44/42 (rejected value 25) with replacement box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: replacement box