Choke transformer 10H/200mA (serial), 2.5H/400mA (parallel) W68 x D71 x H91 mm 1.6 kg/piece with original box, no badge, there are scuffs in places (Kojima Yosuke)
Accessories: original box
Input transformer pair sale 1st: 600Ω-CT-10KΩ 2nd: 50kΩ W44×H65mm approx. 0.24kg/piece (not including protrusions) with original box, no badge, minor bumps and abrasions (Kojima Yosuke)
Accessories: original box
Output transformer sale push-pull output 15 W primary: 5 kΩ secondary: 4-8-16 Ω primary maximum DC current 110 mA W71 × H91 × D68 mm 1.42 kg/piece There are some abrasions and line scratches (Kojima Yosuke)
Accessories: none
Choke Trans Hammer Tone Color Rated 20h/150mA Safety Current 200mA DC Resistance 210Ω (Actual Measurement 209.4Ω) W83 x H104 x D75 mm 2.4 kg Some Hook Scratches and Paint Peel Are Included with Replacement Box (Kojima Yosuke)
Accessories: replacement box
The price has been reduced. 2024/6/22 sales price 5,000 yen. ※1 piece only. Compatible with SX series, FM series, TX series, and ELIMINATOR, in addition to SX300 diaphragms. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.20 Continuity confirmed
Accessories: instruction manual (English), original box
Main specifications: body width 75mm diameter 52mm screw pitch 35mm
Power transformer primary: 90-100-110V secondary: 6.3V-CT/3A 6.3V/3A 5V/2A x 2 12.6V/1A 50V/20mA 385-290-0-290-385V/320mA W122 × H105 × D102 mm 6 kg (actual measurement, not including protrusions) There are fine line damage and paint fading (Kojima Yosuke)
Accessories: none
Since it is a custom-made product sold as an input transformer pair, the specifications are unknown, but they are described by hand. Primary: 600 Ω Secondary: 20 kΩ CT The resistance value has been measured with a tester (1-3:20.7 Ω, 2-4:20.7 Ω, 5-7:198.3 Ω, 6-8:198.8 Ω) W78 x H110 x D66 mm approximately 1.6 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Choke transformer 30h/100mA DC resistance 285Ω (actual measurement) W81 x H102 x D69 mm approx. 2.0 kg (actual measurement, not including protrusions) There are some hook scratches (Kojima Yosuke)
Accessories: none
Choke transformer inductance 10H/200mA DC resistance 101.3 Ω (actual measurement) W90 × H105 × D90 mm 3.4 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Choke transformer 5h/250mA DC resistance 67Ω (measured 66.6Ω), outlet wire length approx. 60 mm (measured) W78 x H94 x D74 mm 1.8 kg, dull and dirty (Kojima Yosuke)
Accessories: none
Output transformer sales secondary: 50-100-200Ω x 2 ※ The primary side seems to be 5 kΩ from the model number. The resistance value has been measured by the tester (between P1-P2:141.8 Ω, between P1 (P2) -B: 71.0 Ω, between 0-50 Ω: 8.2 Ω, between 0-100 Ω: 11.5 Ω, between 0-200 ohms: 16.1 Ω) W110 x H150 x D80 mm 3.6 kg/pcs (actual measurement, not including protrusions) There are fine scratches and paint peeling (Kojima Yosuke )
Accessories: none
Power transformer primary: 100V secondary: 6.3V/4A, 6.3-7.5-12V/5A x 2 W105 x H120 x D105 mm approx. 5 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Power transformer primary: 95-100V secondary: 250-0-250V/80mA, 780-750-600-400-0-400-600-780V/200mA W130 × H150 × D128 mm approx. 9 kg (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Output transparent pair sale primary: 5 kΩ secondary: 600 Ω CT (150 Split), 6 ohm DC 60 mA output 3 W W85 x H83 x D70 mm 1.7 kg/piece (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
Choke transformer 3H/210mA DC resistance 55Ω (actual measurement 52.9 Ω) W50 x H82 x D57 mm approx. 0.8 kg (actual measurement, not including protrusions) original box, with TANGO badge (Kojima Yosuke)
Accessories: original box, TANGO badge
※Sold as 1 piece output transformer for single output 7W hammer tone color primary: 5 kΩ secondary: 4-6-8 Ω W50 x H81 x D58 x 57 mm 0.86 kg (actual measurement, not including protrusions) with original box (Kojima Yosuke)
Accessories: original box
A set of 2 seems to be a choke transformer, but the details are unknown. Measured DC resistance value 380/373Ω W31H95 x 44mm 0.31 kg/piece (actual measurement, not including protrusions), only conduction and resistance values have been confirmed by a tester (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-117V secondary: 12.6V/1A, 6.3V/2A x 2, 40V/50mA, -10-0-10-130-150V/DC180mA ((VOLTAGE DOUBLER) /AC0.6A (CONTINUOUS)) W100 x H75 x D85 mm approx. 3.4 kg (actual measurement, not including protrusions) There is a lot of floating on the cover rust part (Kojima Yosuke)
Accessories: none
Output transparent sale push pull output 35W primary: 8kΩ secondary: 4-8-16Ω usage: 7189 app, etc. W82 x H72 x D82 mm approx. 1.6 kg/piece (actual measurement, not including protrusions) The plate is often scratched, printing is erased a lot, and there are paint floats due to rust in places (Kojima Yosuke)
Accessories: none
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
Power transformer used in MQ60 vacuum tube amplifiers Primary: 100V Secondary: 360V/280mA 100V/350mA 60V/70mA CT-6.3 V/2A W104 × H97 x D87 mm approx. 4.3 kg (actual measurement, not including protrusions) (Yosuke Kojima)
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
Input transparent sale primary: 10 KΩ secondary: 60 kΩ boost ratio 1:2.5 W 24 x H35 mm 60 g/piece (actual measurement, not including protrusions) with white box (Kojima Yosuke)
Accessories: white box
Input transformer sold 1 piece primary: 10KΩ secondary: 60 kΩ boost ratio 1:2.5 W24 x H35 mm 0.06 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 100V secondary: 6.3V/4A, 7-6.3-5-5-6.3-7V/5A × 2 W130 × H150 × D130 mm 8.1 kg (actual measurement, not including protrusions) There are scratches in places (Yosuke Kojima)
Accessories: none
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Power supply/heater transformer primary: 105-115-125V secondary: 6.3V/1.0A, 5.0V/4.0A, 6.3V/4.0A W85 × H110 × D100mm 2.9 kg (actual measurement, protrusions included First of all) it seems to be an unused item from the state of the terminal! (Kojima Yosuke)
Accessories: none
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Heater transformer spare sale primary: 105-115-125V secondary: 6.3V/5A (with CT) W49 × H69 × D45 mm 0.5 kg/piece (actual measurement, not including protrusions) with original box exterior, terminals It seems to be an unused item from the condition! (Kojima Yosuke)
Accessories: original box