The remaining amount of liquid remains almost unused. Audio-Technica's long-selling needle tip cleaner. Gently clean the needle tip from the cantilever side forward with a brush fixed to the lid. This will extend the life of the cartridge. (FUJISAWA KOSHI)
Accessories: original box
POLE STAR's record cleaner using conductive carbon. If you've been looking for one, take this opportunity. It is in excellent condition. (YONEJIMA Satoshi)
Accessories: case
Main specifications: W115 x H35 x D18 mm 31.6 g (actual measurement)
Audio-Technica arm roller + brush cleaner The height is adjustable, which is convenient. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Accessories: none
The price has been drastically reduced. 2025/11/30 sales price 80,000 yen A line transformer using the T-965 from German HAUFE. I tested the sound output with Fourplay's Bali Run, and I have the impression that the low frequency graininess of bass drums has improved, and the sound separation has improved in high frequencies such as hi-hats. It is an item that can easily improve sound quality (Daiki Goto)
Maintenance information: 2025.11.30 Maintained (· transformer attached to chassis (fixed with screws) · input/output terminals and ground terminals added. (It was determined that it was a T-965 line transformer (1:1 boost ratio) from HAUFE (made in Germany).)
Accessories: none
Main specifications: Weight 700g (actual measurement)
The price has been reduced. 2025/11/23 sales price 49,800 yen This is a tubular condenser headphone driver that maximizes the power of STAX ear speakers. At the time, it was used as a set with Lambda Nova, but it can also be enjoyed with other STAX ear speakers. There are minor scratches on the front panel on the exterior (Ryo Mizusaki)
Maintenance information: 2025.11.23 Operation confirmed
Accessories: instruction manual, power cable, connection cable, original box
Main specifications: Vacuum tube used 6CG7 x 2 W195 x D375 x H103 mm 3.4 kg
This is an Accuphase F-20 and F-25 exclusive crossover 5000 Hz chandever board. It is a popular accessory that has become difficult to obtain (Sasaki Shota)
Accessories: No accessories
Key Specifications: Crossover 5000 Hz
Comes with original box! Frequency board for Accuphase F-20 and F-25 channel dividers. It is for 7000 Hz crossovers, which are essential for 3-way configurations (Sasaki Shota)
Accessories: original box, manual
Key Specifications: Chandeber Board for Crossover 7000 Hz
Comes with original box Accuphase chandelier board. Crossover 3500 Hz. Compatible with channel dividers such as F-20 and F-25 (Shota Sasaki)
Accessories: original box
Main specifications: Compatible models F-20/F-25/F-25V crossover 3500 Hz
Accuphase chandelier board. Crossover 12,500 Hz. Compatible with channel dividers such as F-20 and F-25 (Shota Sasaki)
Accessories: original box
Main specifications: Compatible models F-20/F-25/F-25V crossover 12,500 Hz
F-25 line amplifier Output operation for each frequency band divided by crossover frequency is possible. This is an expansion unit required when using 3 ways or more (Sasaki Shota)
Accessories: No accessories
Main specifications: size W48 x H118 x D303 mm approx. 1.0 kg
Accuphase filter amplifier unit. It is a unit for attaching a frequency board and constructing a filter circuit, and is an expansion product for making it 3 ways or more. The exterior is dull (Sasaki Shota)
Accessories: No accessories
Main specifications: W48 x H118 x D303 mm approx. 1 kg
Red console record player cabinet made by Osaka Cable. for DENON motors. It has a double arm design with 2 21mm diameter holes. The dust cover and hinge are missing (Sasaki Shota)
Accessories: none
Main specifications: W530×H72×D533mm 23.5 kg
※Inexpensive because it is a cleaner only. This wet cleaner is for records only. A wide type that can wipe down the surface of an LP record. The exterior is yellowish. (TAMURA Eiji)
Accessories: none
Set of 4 Y-lug terminals The generation of noise and distortion is suppressed, and reliable contact and conduction are achieved. There is a light feeling of use and dullness (Kanai Hidetsugu)
Accessories: original box, wrench
Main specifications: 4 pieces (red x 2, white x 2) set, compatible with wires up to 10 square millimeters (about 3.6 mm) of conductor wire diameter, pure copper core/fork inner dimensions: 6 mm
The disposal price has been reduced. Member prices are not applicable. 2024/7/22 sales price 2,500 yen Special bracket for the company's speaker CPA-5. Can be attached to walls, ceilings, etc. The exterior is dull (Tamura Eiji)
Accessories: original box, screws
The disposal price has been reduced! Member prices are not applicable. 2024/8/31 sales price 1,000 yen This is a bracket for the Infinitesimal 4 of the company's speaker system. There are no noticeable scratches on the exterior. (TAMURA Eiji)
Accessories: original box
The disposal price has been reduced. Member prices are not applicable. 2025/7/26 sales price 9,000 yen Audiocraft brass disc stabilizer. Stable playback is possible with a tight weight. Comes with a stroboscope, which is convenient (Oikawa Tetsuji)
Main specifications: diameter 79 mm x height 20 mm weight 730 g
The disposal price has been reduced. Member prices are not applicable. 2018/10/7 sales price 2,000 yen small stereo condenser microphone. Perfect for Walkmans with recording function. Comes with a holder. There are black spots on the exterior (Wang Zhan)
Maintenance information: 2018.10.3 operation confirmed
Accessories: clip-on holder, case
Main specifications: directional characteristics/unidirectivity x 2 frequency characteristics 100 to 15,000 Hz output impedance 2.6 kΩ W46 x H25 x D63 mm approx. 50 g
The disposal price has been reduced. Member prices are not applicable. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel has a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmφbase, machined stainless steel, 340 g, mounting board hole, φ25 mm, mounting board thickness ~ 20 mm
The price has been reduced. 2025/11/13 sales price 9,800 yen It is connected to the power inlet of the device to avoid ground loops while maintaining EMI shielding, safety, and connection stability. *Please connect the power cable directly to at least one device in the audio system (Kojima Yosuke)
Accessories: none
Main specifications: rated voltage 90 to 240 V maximum rated current 10 A continuous rated current 7 A insulation resistance voltage 1500 Vrms (UL certified) W68 x H37 x D32 mm 61 g
The disposal price has been reduced. Member prices are not applicable. 2025/10/24 sales price 8,000 yen The thickness in the mid to low range has increased so you don't feel the sound loss. The high assembly accuracy is also excellent, and it seems that replacement work can be carried out comfortably (Sasaki Shota)
Accessories: none
Main specifications: cable suitable diameter 6.6 mm to 16.0 mm, wire compatible diameter 10 AWG/5.5 square mm (MAX)
Total length approx. 73 mm diameter approx. 39 mm, weight approx. 65 g
The price has been reduced! 2025/12/2 sale price 35,000 yen rare item! The company's SL-10 and 7 stand are sold separately. Since the main unit can be placed at an angle, the appearance of the record player also enhances the presence of the record player. Also, since you can check the movement and rotation of the arm, you can enjoy the feeling of a record with your eyes. There is a feeling of use on the exterior such as scratches and dullness (Tamai Jun)
Accessories: none
Main specifications: W60 x H146 x D247 mm Weight 1.2 kg/bottle
Set of 4 Y-lug terminals The generation of noise and distortion is suppressed, and reliable contact and conduction are achieved. There is a light feeling of use and dullness (Kanai Hidetsugu)
Accessories: case, wrench
Main specifications: 4 pieces (red x 2, white x 2) set, compatible with wires up to 10 square millimeters (about 3.6 mm) of conductor wire diameter, pure copper core/fork inner dimensions: 6 mm
The marble board has a mirror finish on the entire surface. It is also beveled and has a nice finish. If you place it underneath tall boy speakers that have become mainstream in recent years, it's full of style. Use it for amplifiers, CD players, etc. External line wounds and square chips can be seen (Murakoshi Yoichi)
Accessories: none
Main specifications: 400 x 40 x 600 mm 24 kg/1 sheet
※The base is out of stock, so it's cheap. Dry record cleaner made with premium velvet. The shape is easy to hold, and records can be cleaned effectively. There is a feeling of use such as small scratches (Jun Tamai)
Accessories: none
Set of 4 Received unspecified spikes. The main body is made of metal and has a sense of weight. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Accessories: none
Main specifications: diameter 34 x height 6 mm, weight 50 g per piece (both measured)
Set of 4 Received unspecified spikes. The main body is made of metal and has a sense of weight. The exterior has a feeling of use such as dullness and small scratches (Takahashi Nobuyuki)
Accessories: none
Main specifications: diameter 34 x height 6 mm, weight 50 g per piece (both measured)