The price has been reduced. 2024/11/9 sales price 79,800 yen Maintained! JBL professional 2 inch screwdriver. It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. There are no noticeable scratches on the exterior (Sasaki Shota)
Maintenance information: 2024.11.9 Maintained (0021453 strain removal of iron contamination inside. Vibrating plate installation adjustment. Material terminal part cleaning Terminal dirt cleaning. Insulating Bushing Replacement Diaphragm Cleaning DCR (021453/9.4ohm Vibrating Plate No Scratches)
DCR (021475/9.2 ohm vibrating plate without scratches))
Accessories: none
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
1 bottle only. Precious rolled edge diaphragm. This screwdriver is perfect for those who want to make a thick, deep sound. This is a professional model with a 2-inch slot from JBL. Exterior, paint peeling, rust, dullness, scratches, etc. can be seen (Murakoshi Yoichi)
Maintenance information: 2024.7.24 maintenance (center adjustment)
Accessories: none
Main specifications: 2 inch driver, Alnico magnet, 16 ohms, 500 Hz to 18,000 Hz, recommended crossover frequency: 500 Hz, diameter: 178 x depth: 137 mm, weight: 11.3 kg
The price has been reduced. 2024/12/18 sales price 69,800 yen Maintained! JBL professional 1" screwdriver It was also installed in the late 4344 model. It is a utility driver that can be used in either 2 or 3 ways because it has a sound with a firm outline, but it doesn't come out too much. There is dullness and tape marks (Oikawa Tetsuji)
Maintenance information: 2024.12.18 maintained (SP terminal, internal wiring replacement, pad dampener deterioration replacement, low range, vibration plate mounting adjustment screw, replacement due to rust, DCR (28615 5/6 ohm vibration plate, no scratches) DCR (28670 5.8 ohm vibrating plate no scratches)
Accessories: none
Main specifications: 800 to 20,000 Hz 16 ohms recommended crossover 800 Hz 110 dB throat diameter 2.5 cm 4.8 kg
The price has been drastically reduced. 2024/11/26 Sales price 69,800 yen Maintenance completed! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. Exterior, paint deterioration, dullness, rust, scratches, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.11.26 maintenance completed (diaphragm installation adjustment, pad dampener, mounting screw replacement, terminal contact part cleaning, ultrasonic cleaning of terminal dirt, insulation bushing replacement, diaphragm cleaning)
Accessories: original box, instruction manual
Main specifications: 1 inch driver throat diameter 25 mm 16 ohms (measured 10/12 ohms) 118 dB frequency characteristics 800 Hz to 20 kHz crossover frequency 500 Hz or more 5.1 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/9/24 sales price 99,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 53400 63923 (Tomonori Asaine)
Maintenance information: 2024.9.20 maintenance (diaphragm installation adjustment pad dampener and mounting screws, rust replacement, waste material terminal, contact part cleaning, terminal dirt cleaning, insulation bushing replacement, diaphragm dirt cleaning, DCR (no 31420/8.5 ohm diaphragm scratches)
DCR (21433/7.7Ω diaphragm with small scratches)
Accessories: none
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
The disposal price has been reduced! (Member prices are not applicable) 2024/9/23 sales price 99,800 yen Maintained! JBL professional 2 inch screwdriver It is an item that continues to be used today in large horn systems, etc. The quality unique to titanium diaphragms makes the vocal breathing, drum hi-hat, and outstanding realism no matter which one you take. The exterior has dullness, scratches, rust, etc. due to use over time. Serial 88612 88605 (Tomonori Asaine)
Maintenance information: 2024.9.23 Maintained (installation adjustment. Pad dampener and mounting screw rust replacement, waste material terminal contact part cleaning, terminal dirt cleaning, insulating bushing replacement, diaphragm stain cleaning
DCR (88612/8.4 ohm diaphragm is scratched)
DCR (88605/7.6Ω diaphragm is scratched)
Accessories: none
Main specifications: throat diameter 5 cm; allowable input: 100 W; sound pressure level: 111 dB/w/m; frequency characteristics: 500 Hz to 20 kHz; crossover frequency: 500 Hz or more; 16 ohms; diameter: 235 x depth: 132 mm; 13.6 kg/1
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle