Add search
37 results
Manufacture | Model/Title | Price | Arrival date

AT-LH15/OCCJapan

Ask 24-43271-14211-00
AT-LH15/OCC
Manufacture:audio-technica
Original price: JPY 8,200
Price: JPY 4,091
Japan
Arrival: 2024-06-21 19:51:30
description
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Fujisawa Yukishi) Maintenance information: 2024.6.21 continuity confirmed Accessories: No accessories Main specifications: aluminum 15g

HS-001Japan

This item has been sold.You can't purchase now. 24-42900-11008-00
HS-001
Manufacture:DS Audio
Original price: JPY 42,000
Price: JPY 27,091 Sold Out
Japan 2019 made
Shop: Osu shop
Arrival: 2024-06-14 19:11:08
description
An upper and lower pin structure is used to make the pressure at the contact point uniform. Contact surface stabilization is achieved with a spherical washer. High rigidity is maintained by completely machined super duralumin and manufactured in an integrated manner up to the finger holder (Asae Satoshi Method) Maintenance information: 2024.6.14 continuity confirmed Accessories: none Main specifications: Super duralumin fully integrated machined body, black nickel plating, weight 10.5 g (lead wire not included), 11.0 g (lead wire included)

PCL-3Japan

This item has been sold.You can't purchase now. 24-43018-12949-00
PCL-3
Manufacture:DENON
Original price: JPY 1,500
Price: JPY 2,727 Sold Out
Japan
Arrival: 2024-06-20 19:54:42
description
Denon's classic shell. This is a genuine DA-305 shell. There is also plenty of room around the lead wire, and various cartridges can be attached. The exterior is dull (Yonejima Satoshi) Maintenance information: 2024.6.20 continuity confirmed Accessories: No accessories Main specifications: dead weight 7g

S-2RUK

This item has been sold.You can't purchase now. 24-43249-14005-00
S-2R
Manufacture:SME
Original price: JPY 24,800
Price: JPY 11,636 Sold Out
UK
Arrival: 2024-06-20 19:50:25
description
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. There is paint removal on the screw hole (Murakoshi Yoichi) Maintenance information: 2024.6.17 continuity confirmed Accessories: none Main specifications: aluminum stamping dead weight 8g

S-2UK

This item has been sold.You can't purchase now. 24-43249-14016-00
S-2
Manufacture:SME
Original price: JPY 4,500
Price: JPY 11,636 Sold Out
UK
Arrival: 2024-06-20 19:47:55
description
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that has the lightness and strength essential for light needle pressure arms and heavy cartridges (Kobayashi Hitoshi) Maintenance information: 2024.6.17 continuity confirmed Accessories: none Main specifications: aluminum stamping dead weight 8g

MG-10Japan

This item has been sold.You can't purchase now. 24-43190-13348-00
MG-10
Manufacture:audio-technica
Original price: JPY 4,800
Price: JPY 1,818 Sold Out
Japan
Arrival: 2024-06-18 19:59:52
description
Audio-Technica headshell. It is an attractive classic model with stable popularity and high versatility. The appearance is good with little feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.6.15 continuity confirmed Accessories: none Main specifications: magnesium alloy body weight 10g

S-2RUK

This item has been sold.You can't purchase now. 24-43188-13322-00
S-2R
Manufacture:SME
Original price: JPY 24,800
Price: JPY 11,636 Sold Out
UK
Shop: Osu shop
Arrival: 2024-06-16 19:51:16
description
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi) Maintenance information: 2024.6.16 sound output confirmed Accessories: mounting screws Main specifications: aluminum stamping dead weight 8g

MS-9Japan

This item has been sold.You can't purchase now. 24-43190-13349-00
MS-9
Manufacture:audio-technica
Original price: JPY 3,700
Price: JPY 3,182 Sold Out
Japan
Arrival: 2024-06-18 19:59:54
description
It is a headshell that combines magnesium alloy with anti-vibration material. The overhang and left/right tilt can be adjusted. The appearance is good with little feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.6.15 continuity confirmed Accessories: none Main specifications: magnesium alloy Q dump dead weight 10.2 g

HS-12Japan

This item has been sold.You can't purchase now. 24-43191-13346-00
HS-12
Manufacture:SUMIKO
Original price: JPY 9,800
Price: JPY 5,455 Sold Out
Japan
Arrival: 2024-06-18 19:59:50
description
Lead wire missing. A SUMIKO headshell that is highly popular among American audiophiles. Lightweight shell with a magnesium rigid body. The appearance is good with little feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.6.15 continuity confirmed Accessories: none Main specifications: weight 12.9 g

PCL-3Japan

This item has been sold.You can't purchase now. 24-43245-14023-00
PCL-3
Manufacture:DENON
Original price: JPY 1,500
Price: JPY 2,727 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-18 19:51:37
description
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji) Accessories: none Main specifications: dead weight 7g

S-2RUK

This item has been sold.You can't purchase now. 24-43190-13345-00
S-2R
Manufacture:SME
Original price: JPY 24,800
Price: JPY 11,636 Sold Out
UK
Arrival: 2024-06-17 20:01:04
description
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Kobayashi Hitoshi) Maintenance information: 2024.6.15 continuity confirmed Accessories: none Main specifications: aluminum stamping dead weight 8g

S-2UK

This item has been sold.You can't purchase now. 24-43162-13530-00
S-2
Manufacture:SME
Original price: JPY 4,500
Price: JPY 11,636 Sold Out
UK
Shop: Osu shop
Arrival: 2024-06-16 19:59:55
description
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke) Accessories: none Main specifications: aluminum stamping dead weight 8g

S-2UK

This item has been sold.You can't purchase now. 24-43162-13529-00
S-2
Manufacture:SME
Original price: JPY 4,500
Price: JPY 11,636 Sold Out
UK
Shop: Osu shop
Arrival: 2024-06-16 19:59:58
description
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke) Accessories: none Main specifications: aluminum stamping dead weight 8g

S-2RUK

This item has been sold.You can't purchase now. 24-43162-13528-00
S-2R
Manufacture:SME
Original price: JPY 24,800
Price: JPY 11,636 Sold Out
UK
Shop: Osu shop
Arrival: 2024-06-16 19:59:53
description
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji) Accessories: none Main specifications: aluminum stamping dead weight 8g

JP-502Japan

This item has been sold.You can't purchase now. 24-43018-12940-00
JP-502
Manufacture:Pioneer
Original price: JPY 1,400
Price: JPY 1,818 Sold Out
Japan
Arrival: 2024-06-15 20:05:51
description
Pioneer carbon fiber molded headshell. Simple and easy to use design. It is also attractive that it has a slightly lighter weight and is easy to combine. The exterior is dull (Fujisawa Yukishi) Maintenance information: 2024.6.15 continuity confirmed Accessories: No accessories Main specifications: carbon fiber molding dead weight 9.5 g

ES-12Japan

This item has been sold.You can't purchase now. 24-43018-12933-00
ES-12
Manufacture:ENTRE
Original price: JPY 2,800
Price: JPY 4,545 Sold Out
Japan
Arrival: 2024-06-15 20:05:52
description
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI) Maintenance information: 2024.6.15 continuity confirmed Accessories: No accessories Main specifications: dead weight approx. 13g

FR-S/3Japan

This item has been sold.You can't purchase now. 24-43108-12586-00
FR-S/3
Manufacture:FR
Original price: JPY 4,500
Price: JPY 11,636 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-13 20:10:45
description
FR heavyweight headshell In combination with a heavy needle and pressure needle, it exhibits excellent tracing performance, such as digging up from deep inside a groove on a record board (Sasaki Shota) Maintenance information: 2024.6.13 continuity confirmed Accessories: none Main specifications: aluminum press processing actual measurement 19g

HS-1AsJapan

This item has been sold.You can't purchase now. 24-43179-13256-00
HS-1As
Manufacture:山本音響工芸
Original price: JPY 11,000
Price: JPY 7,091 Sold Out
Japan
Arrival: 2024-06-14 19:14:47
description
This is a specially designed product in which the company's original neighboring bronze machined pin terminals are set on the HS-1A using African ebony wood, and 6N copper wire with excellent sound quality is used as the shell lead. Since lead wires are soldered to the terminals on the arm side, sound quality improvement effects can also be expected due to a reduction in electrical contacts (Murakoshi Yoichi) Maintenance information: 2024.6.11 continuity confirmed Accessories: mounting screws Main specifications: African ebony wood (eco-paint buff finish), brass finger tips (non-magnetic gold plated finish), own weight 10.2 g 

AI-703JJapan

This item has been sold.You can't purchase now. 24-43018-12930-00
AI-703J
Manufacture:JEWEL TONE
Original price: JPY 2,200
Price: JPY 1,818 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-10 20:18:05
description
This is a classic jewel tone (made in Nagoya) shell. There is slight dullness and mounting scratches on the body, but overall it is in good condition. ※The lead wire is not original. (FUJISAWA KOSHI) Maintenance information: 2024.6.10 continuity confirmed Accessories: none Main specifications: machined aluminum block with a dead weight of 12g

PH-8Japan

This item has been sold.You can't purchase now. 24-43018-12924-00
PH-8
Manufacture:Victor
Original price: JPY 2,000
Price: JPY 3,182 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-10 20:18:22
description
*Lead wire missing. An NR (Non Resonance) head shell with the shell body and plug part integrally molded. It has a structure where the main body is tightened from the top and bottom with a finger plate and cartridge, there is no need for a stop nut, and it comes with an overhang adjustment memory, making it easy to set up. (FUJISAWA KOSHI) Maintenance information: 2024.6.10 continuity confirmed Accessories: none Main specifications: dead weight approx. 10 g (actual measurement)

ES-12Japan

This item has been sold.You can't purchase now. 24-43018-12927-00
ES-12
Manufacture:ENTRE
Original price: JPY 2,800
Price: JPY 4,545 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-10 20:18:13
description
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI) Maintenance information: 2024.6.10 continuity confirmed Accessories: none Main specifications: dead weight approx. 13g

FR-S/3Japan

This item has been sold.You can't purchase now. 24-43108-12578-00
FR-S/3
Manufacture:FR
Original price: JPY 4,500
Price: JPY 11,636 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-13 20:10:46
description
FR heavyweight headshell In combination with a heavy needle and pressure needle, it exhibits excellent tracing performance, such as digging up from deep inside a groove on a record board (Sasaki Shota) Maintenance information: 2024.6.13 continuity confirmed Accessories: none Main specifications: aluminum press processing actual measurement 19g

ULS-2Japan

This item has been sold.You can't purchase now. 24-42919-12006-00
ULS-2
Manufacture:SAEC
Original price: JPY 2,000
Price: JPY 4,545 Sold Out
Japan
Arrival: 2024-06-10 20:01:38
description
SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. The exterior has a feeling of use such as dullness (Tomoho Asaine) Maintenance information: 2024.6.10 continuity confirmed Accessories: No accessories Main specifications: aluminum alloy with a dead weight of about 8 g

AT-MS11Japan

This item has been sold.You can't purchase now. 24-43030-12238-00
AT-MS11
Manufacture:audio-technica
Original price: JPY 2,500
Price: JPY 3,182 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-09 20:12:53
description
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left/right tilt adjustment are possible (Oikawa Tetsuji) Accessories: none Main specifications: dead weight 10g

PCL-5Japan

This item has been sold.You can't purchase now. 24-42982-11706-00
PCL-5
Manufacture:DENON
Original price: JPY 2,500
Price: JPY 2,727 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-08 20:02:41
description
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki) Maintenance information: 2024.6.8 confirmed Accessories: none Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g

S-2RUK

This item has been sold.You can't purchase now. 24-43031-11997-00
S-2R
Manufacture:SME
Original price: JPY 24,800
Price: JPY 11,636 Sold Out
UK
Shop: Osu shop
Arrival: 2024-06-06 20:17:33
description
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo) Maintenance information: 2024.6.6 continuity confirmed Accessories: none Main specifications: aluminum stamping dead weight 8g

CS-1000Japan

This item has been sold.You can't purchase now. 24-43030-12239-00
CS-1000
Manufacture:Phasemation
Original price: JPY 25,000
Price: JPY 31,818 Sold Out
Japan 2011 made
Shop: Osu shop
Arrival: 2024-06-06 20:17:03

CS-1200Japan

This item has been sold.You can't purchase now. 24-43030-12240-00
CS-1200
Manufacture:Phasemation
Original price: JPY 55,000
Price: JPY 38,182 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-06 20:17:02
description
Based on the CS-1000, it is a model that promotes high sound quality and weight reduction. The duralumin machined body and Diamond Like Carbon treatment achieve both a sense of luxury and rigidity (Daiki Goto) Maintenance information: 2024.6.5 continuity confirmed Accessories: original box, instruction manual, screws Main specifications: dead weight 13.7 g

ULS-3XJapan

This item has been sold.You can't purchase now. 24-43030-12241-00
ULS-3X
Manufacture:SAEC
Original price: JPY 12,500
Price: JPY 22,727 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-06 20:16:23
description
SAEC ceramic shell A beryllium copper washer and a three-point crimping system are used at the arm joint. The overhang can be adjusted by means of a slide plate on the top. There is a cloudy part (Daiki Goto) Maintenance information: 2024.6.6 continuity confirmed Accessories: none Main specifications: sintered aluminum oxide body, 3-point crimping type, weight 18 g

S-2UK

This item has been sold.You can't purchase now. 24-42995-11830-00
S-2
Manufacture:SME
Original price: JPY 4,500
Price: JPY 11,636 Sold Out
UK
Shop: Osu shop
Arrival: 2024-06-06 20:16:05
description
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Mizusaki Ryo) Maintenance information: 2024.6.6 continuity confirmed Accessories: none Main specifications: aluminum stamping dead weight 8g

HS-4Japan

This item has been sold.You can't purchase now. 24-42958-11426-00
HS-4
Manufacture:Grace
Original price: JPY 1,600
Price: JPY 2,273 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-02 20:06:35
description
It is a grace shell characterized by a fin shape. Lightweight yet hard, highly rigid shell (Asaine Tomoho) Maintenance information: 2024.6.2 continuity confirmed Accessories: No accessories Main specifications: carbon fiber dead weight 10.7g

シルバーシェル

Ask 24-43002-11744-00
シルバーシェル
Manufacture:不明
Price: JPY 2,273
Arrival: 2024-06-05 20:02:32
description
Unspecified silver-colored shell. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Accessories: none

CSS-JHSME-BJapan

This item has been sold.You can't purchase now. 24-43000-11751-00
CSS-JHSME-B
Manufacture:JICO
Original price: JPY 5,000
Price: JPY 3,182 Sold Out
Japan 2023 made
Arrival: 2024-06-02 20:09:19
description
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI) Maintenance information: 2024.6.2 continuity confirmed Accessories: instruction manual, original box Main specifications: aluminum stamping dead weight 7.3 g

ES-12

This item has been sold.You can't purchase now. 24-42959-11431-00
ES-12
Manufacture:Entre
Original price: JPY 2,800
Price: JPY 4,545 Sold Out
Arrival: 2024-06-01 19:52:33
description
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae) Maintenance information: 2024.6.1 continuity confirmed Accessories: none Main specifications: dead weight approx. 13g

ES-12Japan

Ask 24-42959-11429-00
ES-12
Manufacture:Entre
Original price: JPY 2,800
Price: JPY 4,545
Japan
Arrival: 2024-06-01 19:35:25
description
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae) Maintenance information: 2024.6.1 continuity confirmed Accessories: none Main specifications: dead weight approx. 13g

黒シェル

Ask 24-19452-05021-00
黒シェル
Manufacture:不明
Price: JPY 2,273
Arrival: 2024-03-17 18:11:14
description
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi) Maintenance information: 2024.3.7 sound output confirmed Accessories: none Main specifications: dead weight 9g

AシェルDenmark

Ask 21-30998-05988-00
Aシェル
Manufacture:ortofon
Price: JPY 13,636
Denmark
Shop: Osu shop
Arrival: 2021-03-28 19:33:38
description
Altphone A-shell Kusumi, there is a feeling of use (Tetsuji Oikawa) Accessories: None Main specifications: 22g of its own weight (actual measurement)
37 results
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out