Add search
6 results
Manufacture | Model/Title | Price | Arrival date

AC-3000MCJapan

Ask 24-43135-12839-00
AC-3000MC
Manufacture:AUDIO CRAFT
Original price: JPY 65,000
Price: JPY 54,364
Japan 1978 made
Shop: Osu shop
Arrival: 2024-06-13 20:11:26
description
※There is no problem with operation, but the phono cable and original box manual are missing, so it's cheap. There is also only 1 weight. This is a masterpiece arm with one-point support, static balance, and oil dump system. The light arm movement and the sense of balance between the delicate high range and the power of the mid to low range are excellent (Sasaki Shota) Maintenance information: 2024.6.13 operation confirmed Accessories: none Main specifications: static balance type, total length 333 mm, effective length: 237 mm, overhang: 15 mm, needle pressure range: 0 to 3 g (0.25 g steps), compatible cartridge, dead weight: 3 to 17 g

MH-1200SJapan

This item has been sold.You can't purchase now. 24-42905-12226-00
MH-1200S
Manufacture:GLANZ
Original price: JPY 900,000
Price: JPY 680,000 Sold Out
Japan
Shop: Osu shop
Arrival: 2024-06-02 20:06:20
description
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki) Maintenance information: 2024.6.2 operation confirmed Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm

FR-64sJapan

This item has been sold.You can't purchase now. 24-89024-12512-00
FR-64s
Manufacture:FR
Original price: JPY 95,000
Price: JPY 180,000 Sold Out
Japan 1976 made
Shop: Osu shop
Arrival: 2024-06-05 20:07:48
description
Maintained! An FM masterpiece arm made in Japan made with a high level of stainless steel and workmanship accuracy. The clear, thick tone that doesn't make you feel incidental sounds is excellent, and the breadth and ease of settings, and the excellent firm and excellent tracing ability in the dynamic balance type are excellent (Oikawa Tetsuji) Maintenance information: 2024.6.5 Maintained (We will disassemble the arm needle pressure application mechanism part and clean it. The arm lifter skate rubber was replaced due to deterioration. Operation tests with cartridge mounting were also good) Accessories: phono cable, instruction manual Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm

FR-66fxJapan

This item has been sold.You can't purchase now. 24-42993-11670-00
FR-66fx
Manufacture:FR
Original price: JPY 98,000
Price: JPY 436,364 Sold Out
Japan 1981 made
Shop: Osu shop
Arrival: 2024-05-29 20:17:57
description
A rare FR dynamic balance type long arm, which has not arrived in a long time, has arrived! Dynamically balanced Roman arms. It uses a central mass concentration structure and a differential damping mechanism to produce precise and accurate sound. *Phono cable is missing. Serial 161934 (Tamura Eiji) Maintenance information: 2024.5.29 continuity confirmed Accessories: original box, instruction manual Main specifications: Long arm dynamic balance needle pressure range 0 to 3 g total length 379 mm effective length 307 mm overhang 12 mm compatible cartridge 17 to 32 g arm height 36 to 72 mm

HA-937Japan

Ask 24-42936-11225-00
HA-937
Manufacture:HyuGer
Price: JPY 34,364
Japan
Arrival: 2024-05-25 19:54:09
description
The price has been reduced. 2024/5/25 sales price 39,800 yen This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.22 continuity confirmed Accessories: instruction manual, connection cord Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm

MARK1 SUPERUK

Ask 21-31801-11471-00
MARK1 SUPER
Manufacture:DECCA
Price: JPY 38,909
UK
Shop: Osu shop
Arrival: 2021-06-23 20:15:23
description
The price has been drastically reduced. 2021.6.23 sales price 49,800 yen ※Conductivity has been confirmed, but since the terminal has not been treated and the ground wire is broken, it is currently sold. Exclusive tone arm for DECCA MARK 1/2/3 cartridges. Simple structure using straight pipes. Since the needle pressure is a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain an optimal state for the head of the company (Murakoshi Yoichi) Maintenance Information: 2021.6.13 Continuity Confirmed Accessories: armrest Main specifications: static balance type, total length 303 mm, execution length 225 mm
6 results
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out