This is the flagship model of the Dimension Series with outstanding musical expressiveness. In addition to the 12-inch coaxial 2-way, it is equipped with a neodymium magnet and a 1-inch super tweeter with a machined aluminum body. It plays a rich playback sound that combines the depth of taste and realism that is characteristic of tannoy. There are scuffs on the underside of the saran net, stains on the velvet part, and small scratches scattered on the exterior (Murakoshi Yoichi)
Maintenance Information: 2026.8.14 Saran Net Strings Adjusted
Accessories: saran net, spikes, jumpers (general purpose), original box
Main specifications: Use unit 12 inch coaxial 2 way, 1 inch supertweeter (titanium diaphragm/neodymium magnet) efficiency 92 dB (w/m. 1 kHz) continuous allowable input 180 W (RMS) maximum allowable input 675 W (instantaneous) input impedance 6 Ω crossover frequency 12 kHz/1.1 kHz frequency characteristics 30 Hz to 54 kHz (100 kHz/-6 dB) external dimensions 440W x 1210H× 440Dmm mass 49kg
Comes with a genuine dedicated stand HSS-7C! You can enjoy the smooth, beautiful sound unique to British BBC monitors. As expected, there is plenty of noise regardless of genre, from jazz and classical music to rock and pop music. It captivates with just the right amount of box noise and a design where there are guests. There is a slight scratch on the stand (Murakoshi Yoichi)
Maintenance information: 2026.8.14 sound output confirmed
Accessories: saran net, dedicated stand
Main specifications: 2-way 2-speaker bass reflex system unit, 20 cm cone type for low range, 2.5 cm dome type playback frequency band 43 Hz to 20 kHz output sound pressure level 86 dB impedance 8 Ω maximum input 150 W W271 x H520 x D315 mm 12.5 kg
27 capacitors and many other parts have been replaced, and refreshed and maintained by disassembling and cleaning VOL and various SW types! The highest-end model of yesteryear. By actively replacing deteriorated parts, the sound has become brighter, and the original momentum has been revived. It is particularly compatible with the JBL Lancer series. The exterior was cleaned, but there are line scratches on the front panel and rust repair marks on the top surface. Serial 210040548 (Murakoshi Yoichi)
Maintenance information: 2026.8.14 maintained (input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 50W/50W, OK), sound output test) 2026.8.13 maintained (TAPE MONITOR SW disassembly, re-contact terminal reassembly) 2026.7.7 maintained (27 capacitors, 4 semi-fixed resistors, main VR, heat dissipation sheet x 12, micro SW, spark killer, Resistors, all fuses, RCA terminals x 20, SP terminals x 12, diodes, lamps, and LEDs have been replaced. Complete VR and SW disassembly cleaning, removal of old solder and then re-soldering. Each input/output, operation check, input/output waveform check, load test (1kHz sine wave, at 8Ω load: 50W/50W), sound output test)
Accessories: 27 capacitors, 4 semi-fixed resistors, main VR, heat dissipation sheet x 12, micro SW, spark killer, resistor, all fuses, RCA terminal x 20, SP terminal x 12, diode, lamp, LED replacement
Main specifications: 80W+80W (8Ω) frequency characteristics 5Hz to 100kHz tone control/bass, midrange, treble 3-stage adjustment W462 x H155 x D316 mm 17.5 kg
Maintained in March 2025! Pure Class A operation phono equalizer that uses a CR-type equalizer that prioritizes sound quality. The circuit is compatible with both MC and MM cartridges, making it easy to use. As for the exterior, there is a feeling of use such as dullness over time, and there are scratches on the top plate. Serial TEP60253 (Yamato Yuki)
Maintenance information: 2025.3.4 maintained (AC adapter cable replacement operation confirmed)
Accessories: instruction manual power cable
Key Specifications: 15-position MC input impedance setting W232 ✕ H50 ✕ D174 mm Weight 3 kg
※The tweeter is cheap because there is a dent on one side. A model that inherits the lineage of 4312. The sense of speed and range has been improved with a completely renewed unit, and it has been transformed into a high-fidelity speaker that can play all kinds of sources with a clean sound with good damping. The exterior is cracked at the end of the plastic cover on one side of the terminal. Other than that, there are line scratches on the panel and slight damage to the saran net (Mizusaki Ryo)
Maintenance information: 2026.8.15 sound output confirmed (sweep OK. There is a slight gap in the attenuator MID on both sides. (HIGH is OK)
Accessories: none
Main specifications: 3-way 3-speaker bass reflex impedance 6 ohms playback frequency band 45 Hz to 35 kHz output sound pressure level 93 dB size W362 x H597 x D299 mm weight 17 kg
Very few in stock! The unit has been maintained! An 8cm Alnico magnet full range unit that was adopted in the early L54 Trimline, Lancer33, etc., and was the predecessor of the LE8T. The front of the frame and cone paper are black, and the center cap has an aluminum dome. This unit has strong characteristics of the first LE8 and later LE8T. There are thin dents on the center cap, discoloration on the net cover, and rust spots (Kojima Yosuke)
Maintenance information: 2026.8.15 Unit maintained (urethane edge replaced. (4 speaker terminals, 8 insulating bushings, 4 screws have been replaced)
Accessories: none
Main specifications: 8cm full-range alnico magnet measured impedance 5.5/5.9Ω W188 (diagonal 210) x H95mm 3.4kg/book (actual measurement)
An SME short arm specialized for light needle pressure and narrowed down applications. The sharpened, sharp followability is attractive. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to precision machinery, is also excellent (Murakoshi Yoichi)
Maintenance information: 2026.8.14 continuity confirmed
Accessories: instruction manual (copy), phono cable
Main specifications: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g dead weight 491 g
Comes with a micro arm lifter The extremely rare FR-34S has arrived! A universal tone arm that inherits FR-24 technology and has wider adaptability. It is a model that uses miniature bearings with high accuracy as the rotation support mechanism, and the weight of the moving part of the arm is small, and in combination with a low inertia ratio, stable tracking is achieved. There is a crack repair in the base fastener (Murakoshi Yoichi)
Maintenance information: 2026.7.19 Continuity confirmed
Accessories: phono cable, base, screws, subweight
Main specifications: Total arm length: 320 mm; rotation center to needle tip: 230 mm; overhang: 15 mm; height to needle tip: 25 mm to 55 mm; cartridge used; weight balance range: 9 g to 19 g
*Needle cover is missing. This is the first time in 9 years that a working product has arrived. MC cartridge with an integrated shell made of die-cast aluminum. Distortion has been reduced by adopting an 8-shaped power generator coil and a circular armature with no iron core, and it has a flat, firm sound (Murakoshi Yoichi)
Maintenance information: 2026.8.15 sound output confirmed
Accessories: none
Main specifications: MC type 0.3 mV needle pressure 1.7 to 2.3 g 10 to 40 kHz 40 ohms dead weight 20 g
Since it comes with an AT-HS6 headshell, you can use it as is. A standard model with a headshell that uses a bonded elliptical needle that draws out accurate information. The exterior is generally good with no bends (Murakoshi Yoichi)
Maintenance information: 2026.8.15 sound output confirmed
Accessories: needle cover, original box
Main specifications: VM type playback frequency range 20 to 22,000 Hz output voltage 4.0 mV needle pressure 1.8 to 2.2 g (2.0 g standard) joint elliptical needle H21.2 x W21.4 x D62.4 mm mass 15.5 g
Audio-Technica's current headshell. Ideal for installing screw-cut cartridges. Lightweight aluminum shell (Murakoshi Yoichi)
Maintenance information: 2026.8.15 continuity confirmed
Accessories: original box
Main specifications: dead weight 10.7 g
The height of the shelf board is a combination of 250 mm for the lower tier and 150 mm for the upper tier. MSR series L type audio rack. TAOC's unique damping technology has been adopted. It has a unique high rigidity structure that achieves a load capacity of 150 kg per stage. Scratches are conspicuous (Daiki Goto)
Accessories: none
Main specifications: Measured size W1200 x H615 x D470 mm lower height 250 mm upper stage height 150 mm weight approx. 30 kg
ADK's SD series 3-tier rack. There is an “SD-2066RMC” notation on the bottom, but it is a 3-tier specification. This ADK audio rack is proud of its solid natural wood specifications. It is well-built and can handle heavy amplifiers. It has a firm, thick sound. The height can be adjusted by removing the legs, but the pillar is slightly curved and requires some tips for assembly. There are some small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: 138 mm, 154 mm, 274 mm above shelf height (3 tiers can be rearranged) W660 x D560 x H702 mm 30 kg shelf board weight resistance 100 kg
Hamilex “CAMEO” series audio rack. The simple design allows you to place it anywhere. Please contact us for shipping costs (Daiki Goto)
Accessories: manual, key
Main specifications: total load capacity 150 kg W610 x H1,000 x D580 mm 49 kg
Pair tube 801/801A compatible ball brown base square getter measured value 74/64 (rejected value 38) with original box*Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, 10 equivalent tubes, American tea base, fishing rod type damper square getter, measured value 54/52 (rejected value 25) with white box ※The measured values are shown with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Single sale heat beam tube, English tea base lot: 7931, measured value 70 (rejected value 44), there is an abnormal noise inside the base with the original box ※The measured value indicates the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box (writing, surface torn)
Pair tube thick tube made in America, measured value 44/44 (rejected value 30) with original box ※ pair is determined based on gM value measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube thick tube made in America, measured value 42/42 (rejected value 30) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube 6CA7 compatible ball made in China measured value 48/44 (rejected value 30) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: none
Pair tube made in America VT-107A equivalent tube smoke measurement value 90/90 (rejected value 46) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, brown base smoke, JAN, made in America, measured value 90/88 (rejected value 46) with original box ※Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, brown base smoke, JAN, made in America, measured value 94/94 (rejected value 46) with original box ※Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, 6SJ7 high-reliability tube, red metal tube, made in America, measured value 54/50 (rejected value 40) with white box ※Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
*6-month warranty Triode MM/MC compatible phono equalizer. You can easily enjoy records even with an amplifier that does not have a PHONO input. The exterior is slightly dull, and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2026.8.15 sound output confirmed
Accessories: power cable, instruction manual
Main specifications: semiconductor circuit input impedance mm47kΩ/mc2Ω to 47Ω compatible gain mm36dB/mc55dB W90 x H100 x D230 mm 1.6 kg
AT-VM95E/H included. A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data (Murakoshi Yoichi)
Maintenance information: 2026.8.15 sound output confirmed
Accessories: instruction manual, AC adapter, USB cable, phono cable, cartridge, shell, EP adapter
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg
*For commercial use, it is sold as is. It is a compact, high-power speaker that can be used for multiple purposes, and uses twin bezel horns that ensure uniform directivity in the treble range and suppress howling. Compatible with two connection methods: an XLR terminal and a push terminal. There are stains, scratches, and a feeling of use on the exterior (Murakoshi Yoichi)
Maintenance information: 2026.8.9 sound output confirmed
Accessories: none
Main specifications: 2-way bass reflex maximum input 250W (8Ω) frequency characteristics 70Hz to 20kHz W395xH557xD272,5mm 16 kg
SB Acoustics' SB20FRPC30-8 is used as the woofer, and the TW uses SCAN SPEAK's D2606/920000. It is an impressive speaker with a sharp, rich sound. The exterior is dull and has small scratches (Satoshi Yonejima)
Maintenance information: 2026.8.15 good sweep test
Accessories: saran net
Key Specifications: W300 ✕ D430 ✕ H500mm Weight 12 kg
*Currently sold. A simple power amplifier for a variety of applications. You can enjoy a smooth, supple, delicate, and good SN Marantz sound. There is a feeling of use such as ring stains and abrasions on the top plate (Murakoshi Yoichi)
Maintenance information: 2026.8.7 sound output confirmed
Accessories: power cord
Main specifications: 50W+50W (8Ω) WBT SP terminal W440 x H124 x D320 mm 7.5 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A threatening center speaker that supports playback up to 90 kHz. If you are looking for detailed sound, please consider it. Equipped with a direct drive super tweeter. The exterior has a feeling of use such as dullness and dirt (Takahashi Nobuyuki)
Maintenance information: 2026.8.15 sound output confirmed
Accessories: saran net
Main specifications: 6Ω 80W dimensions W360 x H71 x D163 mm weight 2 kg