Fully maintained, including deteriorated condenser, vacuum tube replacement, volume dismantling and cleaning! The fourth model in the 38 series, the successor to the FD. The sound with a good view not found in the early Luxman models is attractive. Of course, it is compatible with TANNOY, but it is also compatible with speakers that have a hard sound, such as YAMAHA monitor speakers. Rust is floating (Daiki Goto)
Maintenance information: 2026.2.14 maintained (power supply diode replacement x 8 pieces, board surface polishing and cleaning treatment, 48V speaker power relay integration procedure. Lever switch detachable disassembly contact cleaning. Rotary switch detachable disassembly contact cleaning. Clean the detachable contacts on each switch. Volume detachable disassembly contact cleaning. Power amplifier section bias balance semi-fixed volume exchange x 6, electrolytic capacitor replacement x 10. Pilot lamp conversion to LED, lamp holder replacement, AC power cable replacement. The above steps have been completed, the operating voltage has been checked and adjusted, and the sound output test is good. When the plug is used as the headphone terminal, there is no sound from the speaker terminal. Please refer to it. Primary AC current 1.02A with the power on. Output vacuum tube 50CA10 bias adjustment. Set to 22 mA each (since the bias is fixed, adjustment is necessary when replacing the output tube. Overall output frequency characteristics 15Hz to 60kHz (-3dB) 1W/8Ω Maximum undistorted output 28W+28W (8Ω) approx. 32W+32W in case of 5% distortion. Residual noise 2 mV (However, it varies due to changes in primary AC power supply). Tone control level change BASS 100Hz±5EB Treble 8kHz±5dB, Lowcut Highcut check is normal, and -2 dB level drops when Mode Switch L+R is performed. Other levels do not change.)
Accessories: copy of the manual
Main specifications: 30W+30W vacuum tubes 50Ca10/4, 6AQ8/2, 6267/2, 12AX7/3, 12AU7/1, Frequency characteristics 30Hz to 40kHz W440 x H162 x D343 mm 20.1 kg
Comes with original box! A vacuum tube type premain amplifier with a 6L6GC push-pull configuration (fixed bias) that pays homage to the famous SQ38 series. The LECUA electronically controlled volume control attenuator was first installed in a vacuum tube amplifier product, and an MM/MC compatible phono amplifier circuit was built in. This model aims for a design and sound reminiscent of products from yesteryear. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2026.2.6 sound output confirmed
Accessories: remote control instruction manual, power cord, original box
Main specifications: 20W+20W (6Ω), 18W+18W (8Ω), 14W+14W (4Ω) 6L6GC x 4, ECC82 x 3, W440 x H197 x D403mm 17.6 kg
*Currently sold. Vacuum tube graphic equalizer in the ONTOMO MOOK appendix. 5 bands (55, 220, 880, 3.5 k, 14 kHz) can be adjusted by ±8 dB. It comes with an ON/OFF switch for the GEQ function, so you can play easily. There are no visible scratches on the exterior, etc., and it is only dull (Murakoshi Yoichi)
Maintenance information: 2026.1.25 sound output confirmed
Accessories: power cord
Main Specifications: Input Impedance: 500 kΩ Output Impedance: 330 Ω Frequency Characteristics: 20 to 100 kHz S/N Ratio: 100 dB Crosstalk: 80 dB or less W183 x H120 x D88 mm 0.9 kg
*Currently sold. Stereo reception was received, but it seems that the sensitivity is not very good with the attached antenna. Luxman vacuum tube FM tuner sold from the Mook book series of Ongakunotomosha Stereo magazine. Wide FM is also supported. You can enjoy the radio comfortably with the vacuum tube type (Murakoshi Yoichi)
Maintenance information: 2026.1.25 sound output confirmed
Accessories: antenna, AC adapter
Main specifications: reception frequency range 76.0 to 90.0 MHz (wide FM87.0 to 108.0 MHz) W180 x H86 x D118 mm 620 g
The price has been drastically reduced. 2026/1/18 sales price 1,380,000 yen The Luxman 100th anniversary model, which went on sale at the end of last year, has already arrived. It is a beautiful item with little feeling of use. It uses a unique LXDTM-i disk drive mechanism that integrates the transport and main chassis. The company's technical know-how was generously introduced, such as installing the BD34302EKV, the top DAC in the MUS-IC series manufactured by ROHM in a dual mono configuration. The highly stable mechanism and generous power supply design enable trouble-free playback even when listening for long periods of time. Serial M51000025 (Murakoshi Yoichi)
Maintenance information: 2026.1.18 Operation confirmed
Accessories: instruction manual, remote control, power cord, original box
Main specifications: output XLR, 1 RCA system, 1 input USB, 1 coaxial system each, 2 optical systems compatible sampling frequency: USB PCM44.1 to 768 kHz, DSD: 2.8 MHz to 22.5 MHz W440 x H154 x D420 mm 25.4 kg
An original digital amplifier from the Stereo magazine appendix, neatly cased. It is a co-planning model between Luxman and STEREO magazine. There's also a power supply section this time. There are scratches on the exterior (Tamura Eiji)
Maintenance information: 2026.1.21 operation confirmed
Accessories: power supply unit, power cable
Main specifications: rated output 12 W+12 W (8 ohms) frequency characteristics 10 Hz to 40,000 Hz S/N ratio 90 dB speaker impedance 4 ohms to 8 ohms
A digital amplifier from the appendix of the 2014/1 issue of the audio magazine “Stereo.” Magazines are not included. It is in good condition with no feeling of use (Oikawa Tetsuji)
Maintenance information: 2025.12.14 Operation confirmed
Accessories: original box, power cable
Main specifications: 12W+12W W94 x H40 x D52 mm 74 g
*Currently sold. Luxman vacuum tube hybrid premain amplifier. This product was designed as an upper model of the LXV-OT7. The vacuum tube ECC802S is on the front part, the volume has been increased in size from the previous model, the input terminals are gold-plated, the speaker terminals are banana compatible, and some other parts have been changed to solid aluminum, so the finish is particular about appearance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.13 Operation confirmed
Accessories: power cable, insulator
Main specifications: output 5W+5W (4Ω) input RCA2 system W192 × H107 × D98 mm 1.0 kg (actual measurement)
D series 3rd generation SACD/CD player. Equipped with the original disk drive mechanism “LxDTM”. A standard model that is particular about high sound quality, such as being equipped with a high sound quality output buffer that strongly drives the next stage amplifier. It has high transparency and a comfortable listening experience typical of Luxe. ※The claws on the remote control battery lid are broken, so it won't hold. Serial G21000999D (Fujisawa Yukishi)
Maintenance information: 2025.11.24 Operation confirmed
Accessories: remote control, power cord
Main specifications: analog output, 1 unbalanced system, 1 system, digital output (44.1 kHz, CD/CD layer only), 1 coaxial optical (TOS-LINK), 1 digital input (32, 44.1, 48, 88.2, 96 kHz compatible), 1 coaxial system, 1 optical (TOS-LINK) system, W440 x H133 x D410 mm, weight 14.7 kg
It is an unused item, unchecked, and sold as is. Comes with a booklet. The original digital amplifier from the Stereo magazine appendix. It is a joint project between Luxman and Stereo magazine, and has been upgraded from the previous model, such as increased output, high sound quality capacitors, and gold-plated terminals. There is some damage to the box and booklet. (FUJISAWA KOSHI)
Accessories: booklet, AC adapter, original box
Main specifications: rated output 12 W+12 W (8 ohms) frequency characteristics 10 Hz to 40,000 Hz S/N ratio 90 dB speaker impedance 4 ohms to 8 ohms