A pre-main amplifier reminiscent of the Luxmans of yesteryear. It focuses on the middle range, which is most important in music, and achieves a moderate sense of range. The warm and relaxed lackstone remains the same, and combines the sharpness of modern times. It is MM/MC compatible and is compatible with analog, and although it is simple, it is one that shines with its good quality. Serial G301004906 (Hiura Katsuji)
Maintenance information: 2026.9.8 sound output confirmed
Accessories: instruction manual, remote control, power cable
Main specifications: output 50W+50W (8Ω), 75W+75W (4Ω) W402 x H169 x D330 mm 15.0 kg
*The USB input is not compatible with new PCs. D/A converter equipped with a USB 2.0 input. It combines a 192 kHz/32 bit high sampling function, and by achieving low cost, it is one that can easily provide that environment to people who want to reproduce high-resolution sound sources but don't have that environment. Serial ES11520 (Takasaki Atsushi)
Maintenance information: 2026.9.6 sound output confirmed
Accessories: instruction manual, power cable, CDROM, original box
Main specifications: digital input frequency 32 kHz to 192 kHz, compatible with a maximum of 32 bits, digital input S/P DIF RCA digital COAX input terminals x 2 systems (compatible 192 kHz/24 bit) S/P DIF TOSLINK OPT input terminals x 3 systems (compatible 96 kHz/24 bit) USB 2.0 digital input terminal x 1 system (compatible 192 kHz/32 bit) output system RCA unbalanced analog output Terminal x 1 system dimensions W300 x H60 x D170 mm weight 3 kg
Manufacturer's maintenance completed! Comes with a remote control. Denon's mid-level premain. The Phono is also attractive because it is compatible with MM/MC and has excellent cost performance. A model with a natural and clean tone that is easy to match with various speakers. It is also recommended as an introductory machine. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.9.3 manufacturer maintained (amplifier board repair, solder correction. Source Direct SW Disassembly Cleaning Function SW, 12V relay replacement. Other inspection of various parts, operation sound test
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 70W+70W (8Ω) playback frequency band 5Hz to 100kHz input 5 systems output 2 systems W434 x H134 x D410 mm 14.6 kg
Maintained! A classic MC boost transformer. With 2 input systems, the impedance can be switched between 3-40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. There are small scratches and a feeling of use on the exterior (Hiura Katsuji)
Maintenance information: 2026.9.8 maintained (repair of broken RCA cables, contact cleaning/contact grease application for 2 changeover lever switches, body cleaning inside and outside the main body such as RCA terminals and GND terminals)
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm 0.8 kg
Scarce! Pickering low impedance cartridges. It's MM, but a boost is required. This cartridge has a sharp, bright, and sharp American sound, and is recommended for jazz. No bending, good damper (Kanai Hidetsugu)
Main specifications: mm type output 0.3 mV playback frequency 20 to 50,000 Hz needle pressure 0.75 to 1.5 g dead weight 5.5 g
※6 month warranty. A Dali subwoofer that uses a custom-designed 10-inch woofer. A 120W amplifier with adjustable volume, crossover frequency, and phase is built into the rear. It is well tuned with other PIANO series. Recommended for setup. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.4 operation confirmed
Accessories: none
Main specifications: active subwoofer (sealed type/passive radiator combined) driver unit 10 inch (approx. 25 cm) woofer x 1+ passive radiator x 1 built-in amplifier output 120W (RMS) maximum 200W playback frequency band 29Hz-150Hz crossover frequency 50Hz-150Hz (variable) maximum sound pressure 109 dB W572 x H566 x D212 mm 19 kg
※6 month warranty. As the model name of DALI's center speaker “vocals” indicates, it focuses on the human voice band, and the combination of the wood fiber cone and soft dome, which DALI excels at, conveys the nuances and texture of the voice smoothly and naturally. By combining it with NOBLE, Ambient, and Forte from the Piano series, you can experience the goodness of its packaging even more. You can see the exterior, dullness, stains, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.4 operation confirmed
Accessories: saran net
Key Specifications: 2-way 4Ω 89dB crossover 2.58kHz W480 × H137 × D189 mm 4.9 kg
Gold1 is a cartridge selected from Silver1 that has undergone strict inspection by GRADO. A newly designed coil design has been adopted, and the entire unit has achieved 17% weight reduction compared to the previous model, and operation performance has improved dramatically (Kanai Hidetsugu)
Maintenance information: 2026.9.5 operation confirmed. The stylus cover is missing.
Accessories: None ※ stylus cover missing
Main specifications: output 5 mV, compatible load, 47 kΩ, output resistance, 475 Ω, frequency characteristics, 10 to 60000 Hz, suitable needle pressure, 1.5 g, dead weight 5.5 g
※The stylus cover is missing. First model in Empire's classic 4000D series. Supported by powerful, sharp mid-low frequencies, the deep and thick sound is perfect for JAZZ. Dullness and feeling of use (Kanai Hidetsugu)
Maintenance information: 2026.9.5 operation confirmed. The stylus cover is missing.
Accessories: none
Main specifications: Mi type output 3 mV needle tip 0.1 mil tracing radius proper needle pressure 1 to 1.75 g load resistance 47 kΩ dead weight 7.3 g
Low compliance cartridge that matches even arms with heavy needle pressure. If you use an arm with good followability, you can enjoy a surprising amount of information and a thick, sharp sound (Hiura Katsuji)
Maintenance information: 2026.9.5 sound output confirmed
Accessories: none
Main specifications: output voltage 5 mV needle pressure 1.5 to 3.0 g
Manufacturer's maintenance completed! A CD player equipped with a swing-arm CDM-1 mk2 mechanism that is still highly regarded today. As expected, it's a swink arm! There is no doubt that once you listen to the rich, thick, analog-like sound, you will be captivated. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.8.23 Marantz service maintenance completed (tray opening/closing belt replacement, lamp replacement, other operation inspections carried out)
Accessories: copy of instruction manual, remote control
Main specifications: 16 bits 4 times oversampling frequency characteristics 2 Hz to 20 kHz W454 x H136 x D363 mm 15 kg
The disposal price has been reduced. Member discounts are not applicable. 2026/8/23 sales price 198,000 yen The electrostatic unit draws a gentle curve and curves, and the sound spreads to about 30 degrees horizontally, so you can enjoy sound with a rich stage feel. External jumper cable The logo on the bottom of the QEGE3172 side woofer is missing. Serial QEGE3162/QEGE3172 (Takasaki Atsushi)
Maintenance information: 2026.8.23 sound output confirmed
Accessories: power cord, jumper (general purpose)
Main specifications: electrostatic 2-way 30cm cone woofer 4Ω 90dB W475 x H1819 x D335 mm 51.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2026/9/2 selling price 378,000 yen Jeff Roland's small monaural amplifier. A high performance mono power amplifier requiring a strong power supply from ICE POWER. The high degree of perfection that achieves both thickness and texture even though it is small, and the glossy tone unique to JEFF is still attractive enough. Appearance, dullness, light scuffs, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2026.9.2 operation confirmed
Accessories: copy of instruction manual, power cable
Main specifications: 250W+250W (8Ω) W216×H65×D290 mm 6.2 kg
The price has been reduced. 2026/9/6 sales price 128,000 yen Maintenance has been completed, such as INPUT DIN connector and power supply block C replacement. Quad power amplifier. Despite its compact body, you can enjoy a smooth, thick sound. It really goes well with speakers made in England, and makes you listen to 70s analog sound with a sense of dynamism. A feeling of use can be seen on the exterior, dullness, rust, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.9.4 maintained (INPUT DIN connector, power supply block C ± co-exchange (original), C and part resistance exchange in both CH boards, Tr check, operation check)
Accessories: copy of instruction manual, power cable, connection cable
Main specifications: 100W+100W frequency characteristics 20 to 20 kHz dimensions W341 x H115 x D195 mm weight 9 kg
The price has been drastically reduced. 2026/9/4 sales price 128,000 yen A SACD/CD player equipped with a USB DAC function compatible with DSD playback. A Marantz SACD/CD player that is very particular about disc playback and data playback. The three-dimensional sound image has good localization, and is excellent at depicting detailed textures like the sound of a stringed instrument. The tray is slightly sticky. Serial 1500143700904 (Takasaki Atsushi)
Maintenance information: 2026.9.3 operation confirmed
Accessories: remote control, power cord
Main specifications: audio output terminal/analog LR (RCA) x 1 coaxial digital x 1 headphone (stereo standard x 1) audio input terminal/USB-B (PC) x 1 USB-A (iPod/memory) x 1 coaxial digital x 1 optical digital x 1 W440 x H123 x D419 mm 14.5 kg
Maintained! JBL mid-size studio monitor speaker A 3-way specification that combines an ultra-high range compression driver. It features clear and powerful sound quality full of transparency. You can enjoy the new-generation JBL sound with a wide range. You can see the exterior, dullness, stains, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.7 Maintained (driver maintenance: magnetic fluid removal in magnetic circuit, gap cleaning, center adjustment)
Accessories: saran net
Main specifications: 3-way bookshelf type frequency band 38Hz to 45kHz 6Ω 91 dB W400 × H635 × D335 mm 32.3 kg
Full maintenance from the unit to the exterior was carried out in 2024/1, and this time the saran net is being repaired and the exterior cleaned. First generation Arden equipped with Alnico unit HPD385. A model that demonstrates outstanding strengths in acoustic sources such as stringed instruments. You can enjoy relaxing music with a good sense of tone that plays music naturally (Kobayashi Hitoshi)
Maintenance information: 2026.9.7 maintained (exterior cleaning, saran net correction/replacement) 2024.1.22 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran net replacement unit maintenance: low frequency side edge replacement/magnetic circuit gap cleaning/center adjustment, fastener polishing, high frequency magnetic circuit in-gap cleaning/center adjustment network maintenance Frequency characteristics check, ATT cleaning, terminal replacement)
Accessories: saran net
Main specifications: 2 way 1 speaker front bass reflex 38cm coaxial unit 8Ω 92dB crossover frequency 1kHz W660 × H990 × D370 mm 43 kg/book
Maintenance has been completed, including blade correction around the cone and magnetic circuit slit maintenance. The finely designed enclosure is equipped with 4 AXIOM80 (the age varies depending on the top and bottom). It has a unique free edge structure with no edges, and its good response is remarkable. The high sound pressure that quickly rises from the mid-high range clearly shows everything from the source to the completion of the player. A famous speaker that plays music with a good tone. The compatibility between this enclosure, the 4-engine AXIOM80, and speaker base is quite good, so this is a system I definitely want you to try out. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.9.3 Maintained (dismantle the blades, damper blades, and blocks around the cone. Bake feather deformation correction, bobbin root re-bonding, magnetic circuit slit maintenance. Clean the magnetic circuit slit, prevent rust, and round out the bobbin. (Assembly and operation confirmation while performing centering adjustments)
Accessories: connection cable, speaker base
Main specifications: Unit: Cone type full range unit 25 cm aperture input 12 W impedance 15 ohms minimum resonance frequency 20 Hz playback frequency band 20 to 20,000 Hz air gap magnetic flux density 17,000 gauss voice coil aperture 2.5 cm size: main body W528 x H940 x D380 mm 39.5 kg (actual measurement) base W750 x H100 x D750 mm 36.5 kg (actual measurement)
Exclusive top of the line preamp. The sound is full of power, the sense of sound pressure is very high, and since the SN is good, the sense of localization is excellent. There is little dramatization in the sound, so the speaker's characteristics come out clearly. Although it is a preamp, it also has a solid weight, and I am amazed at how high it is built. There are deep scratches on the exterior and front panel, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2026.9.4 operation confirmed
Accessories: instruction manual
Main specifications: complete mono-construction structure, 2 balanced inputs, 2 pre-out systems (XLR/RCA), PHONO (MM) input included, W460 x H158 x D446 mm, 27.5 kg
A popular classic model with a long arm. It is precise and delicate, and in addition, it has a very smooth and loud sound, which clearly shows the characteristics of a long arm. It is a versatile arm that can handle various weights and needle pressures from lightweight to heavyweight. You can see a feeling of use on the exterior, dullness, stains, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.9.6 continuity confirmed
Accessories: phono cable, copy of instruction manual
Main specifications: long arm static balance, total length: 400 mm, execution length: 307.3 mm, heavy needle pressure compatible, compatible cartridge, 9.5 to 34 g, needle pressure adjustment: 0 to 5 g
This is the first model in Sony's ES series to use an optical system fixing system. The setting using stabilizers is also unique. The sound image is clear, and the sharpness is typical of Sony with a focus. It is a player from the heyday of CDs, where you can enjoy more satisfaction than the price. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.9.2 operation confirmed
Accessories: stabilizer, copy of instruction manual
Main specifications: CD player, optical fixed pickup, 2 analog outputs (FIXED/VARIABLE), 1 digital system (optical), W430 x H125 x D370 mm, 13.5 kg
*This is a model attached directly to the shell. Maintained! It specializes in light needle pressure, narrows down applications, and has sharpened sharp followability. You can enjoy the sharp cuts and the large amount of information typical of an analog disc. The stoic and beautiful design, similar to a precision machine, is also excellent. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.5 maintained (phono cable RCA plug replacement)
Accessories: connection cable, copy of instruction manual
Main specifications: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g dead weight 491 g
Double name specification for SME that was SHURE's agent in England! A popular headshell with a stylish design. In addition to its design, it is a valuable shell that has both lightness and strength, which is essential for light needle pressure arms and heavy cartridges. *The guide pin seems to be slightly long and may not be attached depending on the arm (Murakoshi Yoichi)
Maintenance information: 2026.9.5 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The body is made of 5mm thick carbon fiber, which looks beautiful, lightweight, and has high rigidity. It plays music with little resonance, high sensitivity, and high freshness. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.5 continuity confirmed
Accessories: none
Main specifications: body/carbon fiber (5 mm thick) finger mount/brass (non-magnetic gold plated finish), dead weight 10.7 g
A rare, spec headshell. Aluminum cutting with a beautiful hairline. The careful craftsmanship, such as the engraving on the back of the finger, makes a good impression. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.7 continuity confirmed
Accessories: none
Main specifications: dead weight 15g
Fidelity-Research headshell Lightweight and highly rigid. It is characterized by an enveloping shape with a thick aluminum press-processed body. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.5 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 10g
A classic shell made from machined aluminum blocks. I like it because of its sturdy construction and simple design. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.5 continuity confirmed
Accessories: none
Main specifications: machined aluminum block body weight 13g
Denon's classic shell. This is a genuine DA-305 shell. There is also plenty of room around the lead wire, and various cartridges can be attached. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.9.5 continuity confirmed
Accessories: none
Main specifications: dead weight 7g
The price has been drastically reduced. 2026/8/19 sales price 158,000 yen. Maintained! The first α907 model. It has the best power and amount of information in the same series. The unique α-X balance circuit achieves a high signal-to-noise ratio. While it has the strength typical of Sansui, the sound is clear and allows you to clearly feel the outline is attractive. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2013.9.15 Maintained (main amplifier circuit relay, protector circuit transistor, headphone relay replacement, power supply circuit transistor solder correction, various input/output inspections, idling, offset inspection adjustments. Interior and exterior cleaning, panel volume, switch cleaning, running tests)
Accessories: copy of instruction manual
Main specifications: effective output 190W+190W (6Ω) 180W+180W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 28.0 kg
The price has been drastically reduced. 2026/8/30 sales price 138,000 yen. Maintenance completed, including replacement of 4 output tubes! Sun Valley KT88 push pull As it looks, it is similar to the Macintosh MC275, and the sound has a bright, vibrant, and supple impression. The sharpness, which is more responsive than a normal transistor amplifier, is attractive. In addition to the exterior and emblem plate defects, a feeling of use can be seen, such as dullness, scratches, etc. (Takasaki Atsushi)
Maintenance information: 2026.8.29 Maintained (KT88 x 4, 7044 x 1, resistor replaced. Soldering repair, vacuum tube pin cleaning, bias check, output sound check)
Accessories: power cable
Main specifications: KT88 push-pull rated output 40W+40W vacuum tube KT88 (made by SUN VALLEY) x 4, EL84 x 4, 12 AX7 x 2, 4Ω/8 ohm compatible W430 x D270 x H200 mm 18 kg