This is a 1 inch throat for Raftcraft. I was able to install a 1-inch driver from JBL and ALTEC. The exterior is scratched, and the paint is bald. (Ryo Mizusaki)
Accessories: none
Main specifications: W132 × H115 × D180 mm 1.3 kg/1 bottle
This is a conversion throat that fits JBL's 1 inch and 2 inch screw holes. The manufacturer is unknown, but it is made of solid metal. There is paint loss on the mounting surface (Murakoshi Yoichi)
Accessories: none
Main specifications: opening 1.5 inch side 51 mm, 1 inch side 38 mm, outer diameter 120 mm, height 50 mm
Shorthorn very similar to JBL shorthorn 2307. The previous owner installed and used the company's 2420. There is some dullness (Murakoshi Yoichi)
Accessories: none
Main Specifications: Total length 220mm Bolt pitch: 100mm on exit side 50mm on entrance side
The price has been reduced. 2022/9/12 sales price 12,000 yen throat adapter for MR64. Compatible with 1.5-inch drivers such as the 288 series. There are scrapes around the screw hole on the driver attachment side, and there is an overall feeling of use (Daiki Goto)
Accessories: none
Main specifications: horn mounting side W100 x H192 mm driver side diameter 130 mm depth 150 mm 1.8 kg
※ Because the texture is different on the left and right, it is inexpensive. A short horn used in 4343 and 4344. It can also be integrated into the enclosure, but you can also hear good sound by attaching a screwdriver and placing it on top of the enclosure. The appearance has a feeling of use such as dullness and scratches. (Morning Tomoho)
Accessories: None
Key Specifications: For 1" Drivers Directional Horizontal 80 Degrees, Vertical 45 Degrees Recommended Crossover 1.2kHz Baffle Opening Diameter 108mm Diameter Depth 216mm
The short horn used on 4343, 4344 It can be built into the enclosure, but it can also be used with a screwdriver and placed on top of the enclosure to make it sound good (Shota Sasaki)
Accessories: None
Main specifications: 1 inch driver directional horizontal 80 degrees, vertical 45 degrees Recommended crossover 1.2 kHz Baffle opening diameter 108mm Depth 216mm
It is inexpensive because the manufacturer label on one side is missing. The short horn used on 4343, 4344 It can be built into the enclosure, but it can also be used with a screwdriver and placed on top of the enclosure to make it sound good (Shota Sasaki)
Accessories: Nothing
Main specifications: 1 inch driver directional horizontal 80 degrees, vertical 45 degrees Recommended crossover 1.2 kHz Baffle opening diameter 108mm Depth 216mm
Straight short horn for 1" driver Adopted by various speakers, it is a standard model that has been used for a long time (Shota Sasaki)
Accessories: none
Main specifications: Directional characteristics 90 (horizontal) /45 (vertical) throat diameter 2.5 cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
Straight short horn for 1" driver It has been adopted in various speakers and is a standard model that has been used for a long time. Paint peels off and there is dirt (Shota Sasaki)
Accessories: Nothing
Main specifications: Directivity characteristic 90° (horizontal) /45° (vertical) throat diameter 2.5 cm Crossover frequency 500 Hz or more Horn total length 216 mm 1.1 kg/1
I cut the price! 2021/3/10 Selling price 15,000 yen ※ It is inexpensive because of poor condition. BL exponential horn. The long horn allows for use at low crossover frequencies. It is possible to create highly directional monitor sound in conjunction with acoustic lenses. Appearance has a noticeable rubber-based dump material mark. Serial 11206/11239 (Satoshi Yonejima)
Accessories: No accessories
Main Specifications: Crossover Frequency 800Hz Sound Pressure Level 108 dB (2308 Lens Use) Throat Diameter 2.5cm Diameter 156 × D293mm Weight 1kg/This
price cut! 2021/6/12 selling price 12,000 yen 1 inch driver straight short horn It has been adopted by various speakers and is a standard model that has long been used. The appearance has Slight Scratch. (YONEJIMA Satoshi)
Accessories: no accessories
Main specifications: Directional characteristics 90 (horizontal) /45 (vertical) throat diameter 2.5 cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
2" PA horn It's cheap yet well-made, and doesn't make you feel cheap. A JBL 2-inch driver can be mounted. (TAMURA Eiji)
Accessories: no accessories
Main specifications: throat diameter 2 inches angle 60 degrees ✕ 40 degrees W315 ✕ H185.4 ✕ D154.9 mm weight 2.2 kg/book
Straight Short Horn for 1" Driver It is a long-used standard model that is used in a variety of speakers. Painting is peeled off (Tetsuji Oikawa)
Accessories: None
Main specifications: Directional characteristics 90( horizontal) /45( vertical) throat diameter 2.5cm crossover frequency 500Hz or more horn total length 216mm 1.1 kg/1
A short horn that fits JBL type 2 inch drivers. It is a radial type with a shape similar to an electro voice horn. Made of resin, the weight is light, and you can easily enjoy the horn sound. There is a tape mark on the back (Yoichi Murakoshi)
Accessories: none
Main specifications: Mounting 4 holes W300 × H200 × D160 mm 600g