Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Maintenance information: 2025.12.11 continuity confirmed
Accessories: none
Main specifications: dead weight 7g
※Since the condition is poor and ATT remains crunchy, it is cheap and is sold as is. A monitor speaker that is easy to use. With its straightforward sound output, you can enjoy a natural sense of volume that is a bit different from current small-aperture speakers. The exterior, grille dents, peeling veneer, woofer mold, etc. can be seen strongly. (Murakoshi Yoichi)
Maintenance information: 2025.12.10 sound output confirmed (lots of attenuator gaps)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, crossover frequency 800 Hz, 5000 Hz impedance 8 ohms, output sound pressure level 90 dB, W320 x H554 x D322 mm, 16.5 kg
Maintained! Crossover 7000 Hz. Recommended for those who want to add 075 or 077. There is some paint peeling on the exterior. Serial 25925/26185 (Tamura Eiji)
Maintenance information: 2025.12.3 maintained (attenuator and speaker terminal replacement, insulation bushing, terminal mounting screw rust replacement
(Crossover check OK)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Victor headshell from the 70s. The screw hole is long, and the overhang can be easily adjusted (Shota Sasaki)
Accessories: none
Main specifications: aluminum stamping dead weight 9.5 g
Maintained. A player that combines Torrance's TD-124 with Ortofon's RMG212! The combined effect of the idler drive and SPU allows you to enjoy a richer, thicker, and darker tone. There are multiple scratches on the arm board (Oikawa Tetsuji)
Maintenance information: 2025.12.10 Maintained (motor disassembly internal check, bearing cleaning. Oil felt replacement. Lubricate, assemble and adjust AC cord deterioration replacement. Main bearing disassembly and lubrication, oil sealant application, assembly. Speed adjustment mechanism inspection and adjustment. Drive belt replacement. Noise suppressor deterioration replacement. Motor grommet deterioration replacement. Replace the strobe reflective glass with a new one that has deteriorated. idler cleaning TT mat cleaning Cushion rubber deterioration replacement. Arm continuity test running test OK)
Accessories: none
Main specifications: [TD124] idler drive system compatible with 16, 33, 45, and 78 rotations, size approx. W400 x H150 x 365 mm (including cabinet) [RMG212] dynamic balance type, total length 300 mm, execution length 228 mm, overhang 16 mm, needle pressure range 0 to 7.5 g, direct reading arm base hole 22 mm, cartridge dead weight 7 to 32 g
Arrived for the first time in 3 years! A cantileverless MC cartridge that transmits the movement of the needle tip directly to the moving coil. The design concept from the FR era has been repeatedly improved, and it is a perfect cartridge for seeking perfect sound. There is a thread on the exterior on the model number printing part (Mizusaki Ryo)
Maintenance information: 2025.12.10 storefront operation confirmed (sound output confirmed. (Be careful as it is easy to distort if you don't make a proper sound)
Accessories: needle cover
Main specifications: MC type output voltage 0.18 mV optimal needle pressure 2 g load resistance 3 ohms own weight 16.2 g
Phasemation's MC boost transformer. It is the successor to the company's classic model T-3. It features a structure that thoroughly eliminates magnetic noise, and its smooth mid-high range with a high sense of SNR is attractive. There are no noticeable scratches (Daiki Goto)
Maintenance information: 2025.12.10 operation confirmed
Accessories: original box, manual
Main specifications: Compatible cartridge 1.5 to 40 ohms, boost ratio, 26 dB, frequency characteristics, 10 to 50 kHz, W136 x H88 x D128 mm, 1.2 kg
TAD's current bookshelf won the Grand Prix and the Audio Famous Machine Award 2023 Special Grand Prize in stereo sound magazines. It has evolved greatly with the adoption of a newly developed woofer MACS2, with the company's representative coaxial unit CST driver at the core. While it has excellent three-dimensional sound field reproduction, it achieves both a graceful and powerful sound. You can enjoy all genres with the sense of speed and realism unique to bookshelves. There are no visible scratches on the exterior, etc., and it is good with just dullness. Serial DGMM000197WM DGMM000198WM (Kobayashi Hitoshi)
Maintenance information: 2025.12.6 operation confirmed
Accessories: spike, spike holder, saran net, instruction manual
Main specifications: 3-way bookshelf type 14cm cone midrange+3.5cm dome tweeter coaxial unit, 18cm cone woofer 34Hz to 100kHz crossover 250Hz, 1.8kHz 85dB 4Ω body W287 x H510 x D447 mm 29 kg stand W399 x H591 x D485 mm 18.5 kg
TAD's current bookshelf, which won the Grand Prix and the Audio Famous Machine Award 2023 Special Grand Prize in Stereo Sound magazine, is now in stock for the first time at Hi-Fi! It has evolved greatly with the adoption of a newly developed woofer MACS2, with the company's representative coaxial unit CST driver at the core. While it has excellent three-dimensional sound field reproduction, it achieves both a graceful and powerful sound. You can enjoy all genres with the sense of speed and realism unique to bookshelves. Exterior There is a light scuff mark on one side. Serial BKMM000031WM BKMM000032WM (Kobayashi Hitoshi)
Maintenance information: 2025.12.6 operation confirmed
Accessories: spike, spike holder, saran net, instruction manual
Main specifications: 3-way bookshelf type 14cm cone midrange+3.5cm dome tweeter coaxial unit, 18cm cone woofer 34Hz to 100kHz crossover 250Hz, 1.8kHz 85dB 4Ω body W287 x H510 x D447 mm 29 kg stand W399 x H591 x D485 mm 18.5 kg
Edge replacement and interior and exterior refreshment maintenance were completed in 2019. This is the first time in a while that JBL's classic 2-way speaker has been introduced. The balance between the middle range, which has a good sense of extrusion, and the low range, which has just the right amount of volume and good tightness, is perfect. From its small size, it has a good sound unique to vintage, showing excellent compatibility with record playback. As for the exterior, there are threads on the top plate and slight dents and repair marks on the TW. Serial 95486, 95553 (Fujisawa Yukishi)
Maintenance information: 2019.4.20 Maintained (exterior repair/polishing/oil finish, front and rear baffle painting, saran net replacement, woofer edge replacement, unit detachment/terminal replacement, internal connection terminal (faston) replacement. ATT exchange. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: saran net
Main specifications: 2 way 2 speakers bass reflex bookshelf type 25 cm woofer 3.6 cm tweeter 8 ohm 89 dB W320 x H610 x D340 mm 19 kg
An insulator made by cutting natural wood myrtle in the camphor family into a small block shape, mainly harvested on the west coast of the United States and used for high-end furniture. By sandwiching it between a disc player or amplifier and a rack, it maximizes the potential of the component and has an excellent effect of greatly improving audio and video quality. The exterior has dullness, small scratches, etc. (Takahashi Nobuyuki)
Accessories: none
Main specifications: W41.0 × H25.4 × D15.7mm
Set of 2 XLR-OUT terminal caps. RF/EMI noise is blocked, and resonant vibration reduction vibration and external noise are prevented at the RCA terminal on the back panel. The exterior is dull (Jun Tamai)
Accessories: original box
Set of 2 XLR-OUT terminal caps. RF/EMI noise is blocked, and resonant vibration reduction vibration and external noise are prevented at the RCA terminal on the back panel. The exterior is dull (Jun Tamai)
Accessories: none
The price has been reduced. 2025/11/26 sales price 5,000 yen. Trio undetailed 30cm woofers. Alnico magnet with reverse rolled edge. There are many stains all over the corn paper (Murakoshi Yoichi)
Maintenance information: 2025.11.16 sound output confirmed
Accessories: none
Main specifications: diameter 315 x depth 163 mm weight 3.5 kg/screw pitch 295 mm (diagonal) 8 ohms
The price has been reduced. 2025/12/8 sales price 110,000 yen analog player with a belt drive system. Cartridges are not included. The characteristic acrylic cabinet is also excellent as an interior decoration. You can enjoy LP records with a silky, natural sound. The earth Y lug on the phono cable is broken on one side (Hiura Katsuji)
Maintenance information: 2025.12.7 operation confirmed
Accessories: instruction manual, power cable, oil, 50/60hz pulley, silicone belt (spare), tools, Souther Engineering Clever Clamp dust cover original box
Main specifications: German ultra-low resonance acrylic chassis using AC synchronous motor W440 × H140 × D350 mm 8.9 kg
The price has been drastically reduced! 2025/12/7 sales price 298,000 yen A current belt drive type player equipped with Luxman's original tone arm. Dust coverless specification The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The exterior is good with little feeling of use. Serial M20400019 (Yonejima Satoshi)
Maintenance information: 2025.12.7 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
The price has been reduced! 2025/11/17 sales price 19,800 yen This is a Soundstyle 3-tier glass shelf rack with a sophisticated design and the functionality of a sturdy coated steel frame. It blends naturally into any interior. Paint peeling can be seen in places. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W1,020×H630×D500mm shelf spacing 240mm shelf board size W900×D500mm
The price has been reduced. 2025/12/10 sales price 228,000 yen Luxman CD exclusive player. The SACD playback function has been eliminated, and USB-DAC functions, starting with playback of MQA-CDs and MQA files, have been enhanced. A PCM1795 manufactured by TI is used as the DAC. The medium to low range resolution is high, and the sound quality with high transparency will keep you entertained. The exterior is in good condition with no noticeable scratches etc. (Sasaki Shota)
Maintenance information: 2025.12.5 operation confirmed (good reading, remote control OK, playback up to USB DSD256 OK)
Accessories: remote control, manual, power cable
Main Specifications: Compatible Disc: CD Digital Input: USBx1 System, COAX x 1 System, OPT x 1 System Digital Output: COAX x 1 System, OPT x 1 System Compatible Sampling Frequencies: USB Input (PCM) 44.1k, 48k, 88.2k, 96k, 176.4k, 192k, 352.8k, 384 kHz (16, 24, 32 bit) USB input (DSD) 2.8 m, 5.6 m, 112 MHz (1 bit) USB input (MQA) 44.1k,48kHz (24bit) (MQA renderer mode) 88.2kHz, 96kHz (24bit) Coax/OPT input 44.1k,48k,88.2k,96kK,176kHz (16,20,24bit) analog output: unbalanced x 1 system W440 x H133 x D410 mm 13.2 kg
Set of 4 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. The exterior is dull and oxidized over time, the color fades on the label, and there is a gap in the anti-vibration rubber (Asae Tomoho)
Accessories: none
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 4 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. The exterior is dull, oxidized, and the label is faded (Tomoho Asae)
Accessories: none
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
Set of 4 An insulator that uses Honeynight, which Technica is proud of. The 4-layer hybrid structure is compact yet has an excellent damping effect. The base material is a luxurious machined brass. The exterior is dull, oxidized, and the label is faded (Tomoho Asae)
Accessories: none
Main specifications: Honeynight, a hybrid structure, and special anti-vibration rubber, are effectively arranged, load capacity 5 kg (1 piece), W30 x D17 mm, weight approx. 65 g/piece
This model was made for the company's S-955 speaker. It can also be used with other medium speakers. feeling of use. It's damaged and dull (Sasaki Shota)
Accessories: none
Main specifications: W450 x H250 x D380 mm 5.5 kg
※There is no operation problem, but since the tweeter is broken, it is being handed over as is. A small JBL speaker. The wood-like side panels blend well with the interior. Even though it has JBL sound, it is a speaker that is easy to hear and use (Daiki Goto)
Maintenance information: 2025.12.9 operation confirmed
Accessories: none
Main specifications: 2WAY2 speaker bass reflex bookshelf impedance 8Ω W294 x H375 x D235 mm 8.2 kg
Unspecified stabilizer. It was attached to NOTTINGHAM's THE SPACEDECK. There is a dull feeling of use (Sasaki Shota)
Accessories: nothing
Main specifications: diameter: 50 mm, thickness: 20 mm, weight: 260 g (actual measurement)
LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.7 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Luxman's classic speaker selector. This is a convenient unit that outputs from 1 input system to 4 systems, or conversely, outputs from 4 input systems to 1 system. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.7 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Speaker cable is a 1.9 m pair terminal, an untreated single crystal conductor, PCCCC+ μ-OFC conductor with special annealing treatment, and has straightforward sound quality without habit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.4 continuity confirmed
Accessories: none
The RCA cable uses a 1.0m pair of 8N conductors, double shielded, and denser insulation and compression twists. It is a high cost performance cable with a realistic sense of attack. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.1 continuity confirmed
Accessories: none
Digital cable, 0.6 m, RCA terminal, is a staple SAEC coaxial digital cable! While the price is easy to use, you can enjoy high-definition sound with a well-made structure. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2025.12.1 continuity confirmed
Accessories: none