*Only 1 bottle There is a gully on the attenuator, but it will be passed as it is. Network with attenuators from the University. Supports crossover from 1,250 Hz to 10,000 Hz depending on the impedance and connection method to the side terminals (Yoichi Murakoshi)
Maintenance information: 2021.11.28 sound output confirmed (with gully)
Accessories: Catalog copy
It has been maintained. With a crossover 7000Hz, the perfect network for tweeters such as 075 and 077! Please enjoy using it according to your purpose, such as 2-way or 3-way. The appearance has a feeling of use such as dullness. Serial 17288 18098 (Asaine Tomoho)
Maintenance Information: 2022.5.14 Maintained (Housing Round Terminal Rust Removal Pickling Cleaning Insulation Bushing & Mounting Screw Replacement ATT Brand New Replacement Frequency Characteristics Measurement Check (~ Approx. 42 kHz) and continue to use the original capacitor for good results input/output waveform and balance check sound output check)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Professional cross-800Hz network. It's a vantage and exhilarating sound. How about making a 2WAY horn system with 16Ω units? There are Kusumi and rust on the main body. Serial 7293/8121 (YONEJIMA Satoshi)
Maintenance Information: 2021.6.28 Maintained (terminal rust removal (pickling) treatment, cleaning, insulation bushings & mounting screws replacement. The adhesive fixing of coils inside the housing is reinforced with silicone. ATT (SW type) contact cleaning. Frequency characteristics measurement check (~42 kHz) and continue to use the original capacitor for good results. Input and output waveform and balance check, sound output check)
Accessories: no accessories
Main specifications: crossover frequency 800Hz impedance 12-16Ω W122 × H154 × D132mm 1.9 kg/1 unit
It's been maintained! With a crossover 7000Hz, the perfect network for tweeters such as 075 and 077! Please enjoy using it according to your purpose, such as 2-way or 3-way. The appearance is painted bald and dull. Serial 27176/27235 (Kimiya Miura)
Maintenance Information: 2022.5.22 Maintained (Terminal rust removal pickling, cleaning, insulation bushing & mounting screw replacement. ATT brand new replacement Frequency characteristic measurement check (~ 42 kHz) was performed and the original capacitor was continued to be used for good results. (Check input/output waveform and balance, check sound output)
Accessories: No accessories
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
It has been maintained. With a crossover 7000Hz, the perfect network for tweeters such as 075 and 077! Please enjoy using it according to the purpose such as 2way or 3way (Yoichi Murakoshi)
Maintenance Information: 2022.5.12 Maintenance (terminal rust removal pickling, cleaning, insulation bushing & mounting screw replacement. ATT brand new replacement Frequency characteristic measurement check (~ 42 kHz) was performed and the original capacitor was continued to be used for good results. (Check input/output waveform and balance, check sound output.)
Accessories: None
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
※There is only one bottle. Maintained! It is an unusual blue frame (mentioned above) model LX5. The impedance is 16 Ω and the cross is 500 Hz, so come with drivers such as 175 and 375 that use 16 ohms! There are dirt, rust floats, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 continuity confirmed. Maintained (internal coil is re-fixed with silicone agent. Rust, clean, and tighten terminals and mounting screws ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results. (Input/output waveform and balance check, sound output check)
Accessories: none
Main Specifications: Crossover Frequency: 500Hz Level Control: 3 Position Switch Input Impedance: 16Ω 159×153×120mm 2.3kg
It has been maintained. With a crossover 7000Hz, the perfect network for tweeters such as 075 and 077! Please enjoy using it according to the purpose such as 2way or 3way (Shota Sasaki)
Maintenance Information: 2022.5.10 Maintained (terminal rust removal pickling, cleaning, insulation bushing & mounting screw replacement. ATT brand new replacement The capacitor was replaced elsewhere, but it was removed due to the difference in capacity (remodeling), returned to the original capacitor left inside the housing, and performed a frequency characteristic measurement check (~ 42 kHz) to confirm that there is no problem Confirmation. (Check input/output waveform and balance, check sound output.)
Accessories: none
Key Specifications: Variable Level Control Crossover Frequency 7kHz 8Ω Weight 900g
Disposal price cut! (Member discounts are not applicable) 2021/2/6 selling price 10,000 yen*Operation is no problem, but it will be passed as is because it is cheap. 3WAY crossover network made exclusively for the company horn scoker unit MIDAX950. The appearance has scratches and threads. (MIURA Kimiya)
Maintenance Information: 2021.2.6 Operation confirmed
Accessories: no accessories
Main specifications: 15Ω crossover frequency 950Hz/5,000Hz W167 × H105 × D105mm 1.5kg/pcs
1 piece only Maintained! Network for 604-8H that is not in stock too much by itself. Please enjoy the original sound quality, like peeling off a dull veil. The main body is connected for 604-8H and becomes a 2-way specification of 1500 Hz. There are small wounds and dullness (Yoichi Murakoshi)
Maintenance information: 2021.11.6 sound sound confirmed
Accessories: None