Maintained! This time, AUDIO ELNA is used as the power block capacitor and in-circuit capacitor. Also, a headphone jack has been added. This model is the 3rd generation of Kriskit's long-selling kit power amplifier. It was designed by Hideya Masutani and captured the hearts of self-made enthusiasts at the time. The tone is clear and has a slight warmth. The exterior has dullness and unevenness on the top plate. (TAMURA Eiji)
Maintenance information: 2026.5.15 Maintained (fuse broken replacement. DC/idling current adjustment volume replacement This unit uses AUDIO ELNA as the power block capacitor and in-circuit capacitor. (The headphone jack has been added)
Accessories: none
Main specifications: 35W+35W W335×H155×D210mm 6kg
Maintained! A preamp from Kobe manufacturer Kriskit. It is a very simple model in both design and functionality, and it is an easy-to-use car. The sense of range is reasonable, but there is no habit, and the warm sound makes me listen to performance above the price. There are scratches and dullness on the exterior. (TAMURA Eiji)
Maintenance information: 2026.5.15 Maintained (Since AUX seems to be output directly on this unit, the AUX signal was para-connected. The TAPE monitor wiring has been changed as usual. Selector switch disassembly contact polishing. (I/O pin jack polish)
Accessories: none
Main specifications: solid state amplifier frequency characteristics 20 to 20,000 Hz size W400 x H110 x D255 mm (including protrusions) Weight 3.9 kg
Maintained! This time, Crafine is the power block capacitor, and BlackGate is used for the amplifier circuit. This model is the 3rd generation of Kriskit's long-selling kit power amplifier. It was designed by Hideya Masutani and captured the hearts of self-made enthusiasts at the time. The tone is clear and has a slight warmth. The exterior has dullness and unevenness on the top plate. (TAMURA Eiji)
Maintenance information: 2026.5.15 Maintained (cabinet painting. DC/idling current adjustment volume left and right exchange. (This unit uses Carafine for the power block capacitor and BlackGate for the amplifier circuit)
Accessories: none
Main specifications: 35W+35W W335×H155×D210mm 6kg
The price has been reduced. 2026/4/29 sales price 59,800 yen In addition to selector disassembly and polishing, maintenance including pin jack polish has been completed! Kriskit's line-only control amplifier. Simple circuit configuration with no phono input. Although it is a domestic manufacturer, it is an amplifier with an American sound that is very similar to Dinakit and has a crisp, extruded American sound. The exterior is dull and has old scars (Ryo Mizusaki)
Maintenance information: 2026.4.29 Maintained (selector switch disassembly contact polishing. I/O pin jack polish Check the input level left and right. RECOUT wiring correction. (Please note that this unit is not equipped with a relay, so if you switch the switch “etc. after turning on the power, it will make a popping sound.)
Accessories: none
Main specifications: 5 line inputs W380 x H110 x D235 mm 3.3 kg
The price has been reduced. 2026/4/29 sales price 45,000 yen Maintenance has been completed, such as shield line changes, DC balance adjustment volume, idling current adjustment volume replacement, etc. This is the third generation of Kriskit's long-selling kit power amplifier. A model designed by Hideya Masutani that won the hearts of self-made enthusiasts. This unit uses Carafine as the power block capacitor, and the amplifier circuit also uses Carafine's high quality capacitors. It features a natural, thick, and clear sound in the mid-range. Overall there is dullness (Oikawa Tetsuji)
Maintenance information: 2026.4.29 Maintained (changed to shielded wire. DC balance and idling current adjustment volume exchange. (This unit uses black Cerafine for the power block capacitor and red Carafine for the amplifier section)
Accessories: none
Main specifications: 35W+35W W335×H155×D210mm 6kg
The price has been reduced. 2026/4/29 sales price 45,000 yen Maintenance has been completed, such as shield line changes, DC balance adjustment volume, idling current adjustment volume replacement, etc. This is the third generation of Kriskit's long-selling kit power amplifier. A model designed by Hideya Masutani that won the hearts of self-made enthusiasts. This unit uses Carafine as the power block capacitor, and the amplifier circuit also uses Carafine's high quality capacitors. It features a natural, thick, and clear sound in the mid-range. There is rust on the top plate (Oikawa Tetsuji)
Maintenance information: 2026.4.29 Maintained (shield wire changed, DC balance and idling current adjustment volume replaced. (This unit uses black Carafine for the power block capacitor and red Carafine for the amplifier section)
Accessories: none
Main specifications: 35W+35W W335×H155×D210mm 6kg
The price has been reduced. 2026/4/23 sales price 49,800 yen Maintained! This is a 2-way channel divider with variable frequency. Both LOWPASS and HighPass can be independently adjusted between 600 Hz and 6000 Hz. Detailed settings can be made according to the application, and it is a convenient specification (Daiki Goto)
Maintenance information: 2026.4.23 Maintained (internal wiring fixed. Balance adjustment for each output level.)
Accessories: none
Main specifications: 2-way crossover frequency LOWPASS (600, 650, 700, 800, 900, 1000, 1200, 1500, 2000, 3000, 6000 Hz) HIGHPASS (600, 650, 700, 800, 900, 1000, 1200, 1500, 2000, 3000, 6000 Hz) independently variable low and high frequency with left and right independent volume dimensions W400 x H95 x D260 mm weight approx. 3.8 kg