A multi-channel divider that has been completely remodeled from the DF-55! It is equipped with a high-speed, high-precision DSP to achieve higher order filter characteristics with even less error. Also, the monophonic mode, which enables the D/A converter to be driven in parallel, makes it possible to make full use of the DF-65 to further improve performance. The exterior is dull, etc., and there is a feeling of use. Serial E7Y065 (Asae Tomonori)
Maintenance information: 2023.6.16 operation confirmed (sound output confirmed for all channels)
Accessories: instruction manual, power cord, original box
Main specifications: cutoff frequency 31.5 Hz to 22.4 kHz (-30 dB, 59 points) attenuation characteristics 6 dB/octave, 12/octave, 18/octave, 24/octave, 48/octave, 96/octave level control, each band +45.0 dB to 40.0 dB (0.1 dB steps), time alignment set in 0.5 cm units to a maximum of 3000 cm, memory function 1 to 5 analog inputs 2 systems (RCA, XLR) 3 digital input systems (coaxial, optical, HS-LINK) 1 digital audio output system (HS-LINK) pre-out: 4 systems (RCA/XLR x 4)
W465 x H151 x D396 mm 15.1 kg
Significantly reduced price! 2021/5/20 The current multichannel divider with a full model change of the DF-55 price 648,000 yen! Equipped with high-speed, high-precision DSP, realizes higher-order filter characteristics with less error. The monophonic mode, which enables parallel drive of D/A converters, enables full use of the DF-65 for further performance improvements. Appearance, there are some bruises. Serial E7Y001 (Satoshi Yonejima)
Maintenance Information: 2021.5.20 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: Cutoff frequency 31.5Hz to 22.4kHz (-30 dB, 59 points) attenuation characteristics 6dB/octave, 12/octave, 18/octave, 24/octave, 48/ octave, 96/octave level control Each band +45.0dB to 40.0dB (0.1 dB step) Time Alignment 0.5cm Units Up to 3000cm Configuration Memory Functions 1 to 5 Analog Inputs 2 (RCA, XLR) Digital Input 3 (Coaxial, Optical, HS-LINK) Digital Audio Output 1 System (HS-LINK) Preout: 4 Systems (RCA/XLR × 4)
W465 x H151 x D396mm Weight 15.1kg
Accuphase digital channel divider. The standard specification is equipped with 4 channels (4 WAY), and a higher order filter with few errors has been achieved by adopting a high-precision high-speed DSP. The ease of operation, including connectivity and ease of use, is also one of the attractions. There are small scratches, but they are in good condition (Daiki Goto)
Maintenance Information: 2022.11.8 Operation confirmed
Accessories: original box, power cable, instruction manual
Main specifications: digital input/COAXIAL, OPTICAL, HS-LINK analog input/RCA, XLR digital output/COAXIAL, HS-LINK frequency characteristics 2.0 ~ 50,000 Hz slope characteristics/6dB, 12dB, 18dB, 24dB, 48dB, 96dB W465 × H151 × D396 mm 14.7 kg
Disposal prices have been reduced! Member prices are not applicable. 2023/12/7 Sales price 698,000 yen Maintained! VIOLA channel divider. 680Hz/2way specification A choke input transformer, which is VIOLA's family art, is used. This reduces electromagnetic interference and greatly reduces electrical stress generated on the power supply unit. Furthermore, it is designed to be resistant to noise and distortion from AC lines so that the power of AC power supplies can be used to the fullest (Fujisawa Yukishi)
Maintenance information: 2023.12.6 Maintenance has been completed (all have been replaced due to poor operation due to oil sticking to the VOL knob for gain adjustment (only the outer knob has been replaced and the original VOL continues to be used), and the specs and blocking characteristics have been checked. (The measured cross frequency was 680 Hz)
Accessories: power supply unit, power cable, connection cable
Main Specifications: Crossover 680 Hz Main Unit W447 x H45 x D406 mm Weight 8.5 kg Power Unit W223 x H91 x D406 mm Weight 9.1 kg
Disposal prices have been reduced! Member prices are not applicable. 2023/2/7 sales price 548,000 yen This is an Accuphase digital channel divider. It is equipped with 4 channels (4 WAY) as standard specifications, and a higher-order filter with even fewer errors has been achieved by adopting a high-accuracy, high-speed DSP. Good operability, including connectivity and ease of use, is also one of its attractions. As for the exterior, there is 1 scratch on the front panel edge on the top plate side
Maintenance information: 2023.2.7 operation confirmed
Accessories: instruction manual, power cable
Main specifications: Digital input: COAXIAL, OPTICAL, HS-LINK Analog input: RCA, XLR Digital output: COAXIAL, HS-LINK Frequency characteristics: 2.0 to 50,000 Hz Slope characteristics: 6dB, 12dB, 18dB, 24dB, 48dB, 96dB W465 × H151 × D396mm 14.7 kg
An AI2-B1 balanced input option board is included. 4-way specification with 2 DN-35 units added to the base housing. The high-sampling 192 kHz/24 bit compatible digital channel divider enables accurate phase control unique to this machine. There is a feeling of use such as appearance, dullness, scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.10.4 sound output confirmed
Accessories: instruction manual, power cable
Main specifications: 54 points crossover frequency, 7 types of damping characteristics, digital inputs: coaxial (RCA), 1 system, size, W475 x H171 x D405 mm, weight 18 kg
Balanced input option board AI2-B1 is included. A 4-way specification with two additional DN-35 units in the base housing. The high-sampling 192kHz/24bit compatible digital channel divider enables accurate phase control unique to this machine. The appearance is dull (Oikawa Tetsuji)
Maintenance information: 2022.4.10 operation confirmed
Accessories: instruction manual, power cable
Main specifications: Crossover frequency 54 points attenuation characteristics 7 types Digital input: Coaxial (RCA) 1 system size W475 × H171 × D405 mm Weight 18 kg