Manufacturer maintenance completed! 500Hz/2 way specification. This is a refined model of the F-15. It is one of the few channel dividers that leaves an analog feel and allows you to enjoy multiple systems. Clean, unobtrusive sound allows you to properly tune your multi-system. The exterior is dull and has small scratches (Sasaki Shota)
Maintenance information: 2022.12.17 manufacturer maintenance completed (CB500 turnover switch contacts were cleaned due to poor contact. Each volume and switch are in poor contact, so the contacts are cleaned. Replace deteriorated electrolytic capacitors. Internal and external cleaning functions and performance can be checked. (Pressure resistance, safety confirmation OK)
Accessories: instructions
Main specifications: 500Hz/2-way specification The input/output RCA/XLR switchable frequency is fixed to the board W445 x H109 x D373 mm 9.1 kg
The price has been drastically reduced! 2022/3/22 Sales price 178,000 yen Frequency variable channel divider. With 4 built-in filters at 18dB/oct, 2-way/3-way, mono 4-way, and 5-way selectable by switch. A transformer is used for all inputs and outputs, which increases the freshness of the sound quality itself, and excellently improves notches and graininess. I have the impression that the sound is approaching like a fist. The appearance is dull, dirty, and faded (Sasaki Shota)
Maintenance information: 2020.9.11 maintained (FREQ each VOL all cleaning treatment (can't be removed), other SW cleaning, power supply filter C, each CH (INPUT coupling C replacement, part of the pattern in the main board has defective solder → check re-solder = operation check)
Accessories: power cable, English manual
Main specifications: 2way/3way (stereo) 4way/5way (mono) each crossover frequency stepless variable possible W483 × H89 × D248mm 4.5kg
Maintenance has been completed! A rare Goto channel divider. By using a buffer amplifier, it is possible to send out at the same level over almost the entire range. The crossover is 280/1K/5kHz. If you are using the GOTO system, please give it a try. As for the exterior, there are scratches on the top plate and dullness on the whole. Serial 97050 (Satoshi Yonejima)
Maintenance information: 2022.8.6 Maintained (wiring analysis, connection and connection change. INPUT/OUTPUT terminal contact adjustment. Replace the power circuit capacitor. Check each output. (* Press the BOOST switch to turn it off)
Accessories: No accessories
Main specifications: Way channel divider Attenuation characteristics 6dB/OTC Crossover frequency 280 Hz/1 kHz/5 kHz Distortion ratio 0.01% or less W480 × D400 × H140mm Weight approx. 9kg
The price has been reduced. 2022/7/1 selling price 138,000 yen 2-way specification with balanced input/output, 650 Hz/2-way board included. It is a refined model of the F-15. It is one of the few channel dividers that allows you to enjoy multi-system while retaining an analog feel. You can tune your multisystem correctly with clean, clutter-free sound. There are small scratches and dullness corresponding to the year (Yoichi Murakoshi)
Maintenance information: 2022.6.30 Sound output confirmed
Accessories: none
Main specifications: 2way/3way divider input/output RCA/XLR switching type Frequency is fixed by board W445 × H109 × D373 mm 9.1 kg
The price has been reduced. 2023/11/21 sales price 148,000 yen A 2-way multi-channel divider loaded with an FB-350. Specially designed for 2 ways with balanced input/output circuits. You can build a clear and fresh multi-system. There are no major scratches on the outside, but overall there are dullness and stains. The power cable is not genuine (Oikawa Tetsuji)
Maintenance information: 2023.11.21 Operation confirmed
Accessories: power cable (non-genuine), instruction manual
Main specifications: crossover 350Hz W475 x H150 x D395mm weight 10 kg