Very unusual 500Hz, 3way specification of 7000Hz! Levinson fan coveted electric crossover From the feel of knob that seems to be a yamituki, you can see the goodness of early Levinson's creation. Usability is also good because it is an RCA terminal. Please enjoy the unique tone of Levinson. There is a feeling of use, Kusumi, small scratches. ※ Some terminals have been replaced. Power supply is PLS-153L (Sasaki Shota)
Maintenance information: 2021.2.14 Maintenance (replacement for rchHigh adjustment borium contact failure, all other borium contact cleaning, blocking characteristics inspection, spec inspection.) 2015.2.2 Maintenance carried out (4 potentiation meters for borium co-decomposition cleaning, Lch LOW vernier dial lock mechanism modification, spec inspection, inspection of each operation, volume adjustment port (Disassemble and clean the tension meter again)
Accessories: Power supply (PLS-153L), Power cable, Connection cable, Copy of explanation (English)
Main specifications: 3-way 500/7000Hz *500Hz 2-way can also be used Closed module type RCA input/output size (body) W483 × H51 × D156mm 2.8 kg Size (Power supply part) W101 × H101 × D256 mm 2.2 kg
Maintained. It is a rare 500Hz and 7000Hz 3-way specification. An electric crossover coveted by Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. Since it is an RCA terminal, it is easy to use. Please enjoy the unique sound of Levinson. The exterior is dull and has a feeling of use. ※The knob lock is broken and cannot be fixed. The power supply is PLS-150. Serial 0039/1959 (Tamura Eiji)
Maintenance information: 2024.3.22 Maintained (replacement of deteriorated parts. Other inspections and adjustments. The knob lock parts are damaged, but this is the current state because parts are not available (there is no problem with normal use))
Accessories: power cable
Main specifications: 3-way crossover 500/7,000 Hz main body W483 x H51 x D156 mm 3.9 kg power supply unit W101 x H101 x D256 mm 2.2 kg
A 4-way digital multi-channel divider that realizes full digital signal processing. It is one of the few models that can be connected via HS-Link to input SACD data as a digital signal. All 4 outputs have both RCA/XLR connections, and each channel is equipped with independent left and right digital attenuators. The 59-point cutoff frequency, higher-order slope characteristics, phase, level control, etc. can be adjusted arbitrarily. The exterior is only smudged (Kobayashi Hitoshi)
Maintenance information: 2023.5.16 operation confirmed
Accessories: instruction manual, power cable
Main specifications: 4-way divider unit standard equipment [analog input] RCA x 1, XLR x 1 [digital input] optical x 1, coaxial x 1, HS-LINK x 1 [analog output] XLR x 1, RCA x 1 [digital output] coaxial x 1 W465 x H150.6 x D395.8mm 14.1 kg
Maintained! This is an unusual open module, making it an ideal crossover 250Hz for the JBL 4350. The crossover frequency can be changed for a fee. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. The exterior has stains and small scratches (Wang Zhan)
Maintenance information: 2023.12.21 maintained (all 4 potential meters replaced. The defective volume and capacitor have been replaced. The power supply unit has been refilled. The 100Hz setting was changed to 250Hz. Other inspections and adjustments have been made)
Accessories: instruction manual copy, power cable, connection cable, power supply unit, 6 Remo pins
Main specifications: 2-way crossover 250Hz main unit W483 x H51 x D156 mm/3.9 kg Power supply unit W101 x H101 x D256 mm/2.2 kg
The price has been reduced. 2023/9/3 sales price 398,000 yen. Maintained! Mark Levinson's famous channel divider. 2 way/250 Hz specification. It lets me hear sounds unique to Levinson from the ease of construction unique to Levinson in the early days. Recommended for JBL4350 owners. PLS-150 power supply There is an appearance, dullness, small scratches, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintenance completed (all deteriorated power supply capacitors replaced, output voltage readjustment, main body volume 4 contact cleaning, volume ground replacement, cross characteristic inspection, specification inspection, operation inspection)
Accessories: manual copy, power cable, connection cable, power supply unit, remo pin x 3 pairs
Main specifications: main unit W483 x H51 x D156 mm weight 3.9 kg power supply part W101 x H101 x D256 mm weight 2.2 kg
The price has been reduced! 2021/11/14Sales price 398,000 yen It is a 4-way digital multi-channel divider that realizes full digital signal processing. It is one of the few models that can connect with HS-Link to input SACD data digital signals. All four outputs have both RCA/XLR connections, and each channel has a left-right independent digital attenuator. Cutoff frequency of 59 points, high-order slope characteristics, phase, level control, etc. can be arbitrarily adjusted. The appearance has Rubbing and Slight Scratch on the body. Serial L6Y248 (Satoshi Yoneshima)
Maintenance information: 2021.11.14 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: 4way divider unit standard equipment [analog input] RCA × 1, XLR × 1 [digital input] optical × 1, coaxial × 1, HS-LINK × 1 [analog output] XLR × 1, RCA × 1 [ Digital Output] Coaxial × 1 W465 × H150.6 × D395.8mm 14.1 kg
Maintained! Levinson channel dividers. This is a rare open module type. It is currently set to 500 Hz, but the frequency can also be changed (with a paid service). It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. The power supply unit is PSL-153L. There are threads and dullness on the exterior. Serial 0082/6435 (Tamura Eiji)
Maintenance information: 2024.3.22 Maintained (replacement of deteriorated parts. Other inspections and adjustments)
Accessories: power cable, connection cable
Main specifications: 2-way crossover 500 Hz main unit W483 x H51 x D156 mm 3.9 kg power supply unit W101 x H101 x D256 mm 2.2 kg
Maintained! This is an unusual open module, making it an ideal crossover 250Hz for the JBL 4350. The crossover frequency can be changed for a fee. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. Since the main input/output has been changed to RCA, the Remo pin is not included (Wang Zhan)
Maintenance information: 2023.12.21 maintained (all 4 potential meters replaced. The power supply unit has been refilled. The 160Hz setting was changed to 250Hz. Other inspections and adjustments have been made)
Accessories: instruction manual copy, power cable, connection cable, power supply unit
Main specifications: 2-way crossover 250Hz main unit W483 x H51 x D156 mm/3.9 kg Power supply unit W101 x H101 x D256 mm/2.2 kg
Maintained! It's a rare open module, and it's a 650 Hz crossover perfect for the JBL M9500 and Exclusive 2401Twin. The crossover frequency can be changed for a fee. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. The exterior has stains and small scratches (Wang Zhan)
Maintenance information: 2023.12.21 maintained (all 4 potential meters replaced. Deteriorated capacitors, resistors replaced. Other inspections and adjustments have been made. It's set to 650 Hz)
Accessories: instruction manual copy, power cable, power supply unit, 6 Remo pins
Main specifications: 2-way crossover, 650 Hz, main body, W483 x H51 x D156 mm, 3.9 kg, power supply, W101 x H101 x D256 mm, 2.2 kg
The price has been reduced! 2023/3/24 sales price 398,000 yen with cabinet! A 2-way 250Hz specification coveted by enthusiasts that makes the double woofer JBL 4350 sound. *LPM/250Hz and HPM/300Hz are equipped with rare open modules. Enjoy sharp sharpness and braking power that you can't feel with other channel dividers. You can see how well Levinson was built in the early days from the feel of the knob, which seems to be addictive. The sound unique to Levinson makes you hear it closely even on the divider. Serial 0229 (Asae Tomonori)
Maintenance information: 2023.3.24 operation confirmed
Accessories: instruction manual copy, connection cable, Remo pin x 6, rubber foot power cable ※ on order
Main specifications: 2-way 250Hz specification closed module type RCA input/output size (main body) W483 x H51 x D156 6 mm 2.8 kg size (power supply unit) W101 x H101 x D256 mm 2.2 kg
The price has been reduced. 2021/12/4 selling price 398,000 yen. This is a 4-way digital multi-channel divider that realizes full digital signal processing. It is one of the few models that can connect with HS-Link and input SACD data with digital signals. All four outputs have both RCA/XLR connections, and each channel has independent left and right digital attenuators. Cut-off frequency of 59 points, high-order slope characteristics, phase, level control, etc. can be arbitrarily adjusted (Yoichi Murakoshi)
Maintenance information: 2021.12.4 sound sound sound confirmed
Accessories: instruction manual, power cable
Main specifications: 4-way divider unit standard equipment [analog input] RCA × 1, XLR × 1 [digital input] optical × 1, coaxial × 1, HS-LINK × 1 [analog output] XLR × 1, RCA × 1 [ Digital output] Coaxial × 1 W465×H150.6×D395.8mm 14.1kg
The price has been reduced! 2023/12/15 Sales price 378,000 yen Maintained! Mark Levinson's famous channel divider. It is an unusual open module type. It is currently set to 500 Hz, but it is possible to change the frequency (with a paid service). It lets you hear sounds unique to Levinson due to the ease of construction unique to the early Levinson. PLS-153L power supply. There are small wounds and dullness (Fujisawa Yukishi)
Maintenance information: 2023.12.15 Maintained (all contacts were cleaned due to poor contact with the main unit gain volume, replaced all power supply deteriorated capacitors, output voltage readjusted, shut off characteristics checked, and spec checked.)
Accessories: instruction manual copy, power cord, connection cord, power supply unit, 3 pairs of Remo pins
Main specifications: main unit W483 x H51 x D156 mm, weight 3.9 kg, power supply unit W101 x H101 x D256 mm, weight 2.2 kg
Mark Levinson's famous channel divider It will be an unusual open module type. It is currently set to 650 Hz, but the frequency can also be changed (with a paid service). They tell me the tone unique to Levinson because of the good construction unique to the early Levinson. PLS-150 power supply There are scratches and scratches on the appearance. Serial 0257/1347 (Eiji Tamura)
Maintenance information: 2022.3.11 Operation confirmed (operation inspection and running test were performed, but there is no particular problem (capacitors including power supplies have been replaced in the past))
Accessories: Connection cable, power cable, LEMO x 6
Main specifications: Body W483 × H51 × D156 mm Weight 3.9 kg Power supply part W101 × H101 × D256 mm Weight 2.2 kg
Disposal prices have been reduced. Member prices are not applicable. 2022/12/4 sales price 448,000 yen balance input option board AI2-B1 included. 4-way specification with 2 DN-35 units added to the base housing. The high-sampling 192 kHz/24 bit compatible digital channel divider enables accurate phase control unique to this unit. The exterior is dull with snacks (Oikawa Tetsuji)
Maintenance information: 2022.12.4 operation confirmed
Accessories: instruction manual, power cable
Main specifications: crossover frequency 54 points, attenuation characteristics, 7 types of digital input: coaxial (RCA), 1 system size, W475 x H171 x D405 mm, weight 18 kg
The disposal price has been reduced. Member prices are not applicable. 2023.12.21 Sales price 378,000 yen Maintained! It is an unusual open module and is an ideal crossover 290 Hz for the JBL 4344. The crossover frequency can be changed for a fee. It lets you hear sounds unique to Levinson due to the good construction unique to the early Levinson. Since the main input/output has been changed to RCA, Remo pins are not included (Wang Zhan)
Maintenance information: 2023.12.21 Maintained (all 4 potentiometers have been replaced, 11 capacitors have been replaced. I set it to 290 Hz. Other inspections and adjustments have been made)
Accessories: copy of instruction manual, power cable, power supply unit
Main specifications: 2-way crossover 290 Hz main unit W483 x H51 x D156 mm 3.9 kg power supply unit W101 x H101 x D256 mm 2.2 kg
Prices have been reduced! 2023/11/10 sales price 350,000 yen This is an electric crossover coveted by Mark Levinson fans. 2-way 100Hz specification You can see how well the early Levinson was built from the feel of the knob, which seems to be addictive. The sound unique to Levinson can also be heard intensely with the divider. The exterior has scuffs and color unevenness. Serial 0121, 0185 (Tamura Eiji)
Maintenance information: 2023.10.11 maintenance completed (all power supply deterioration capacitors replaced, output voltage adjustment, contact cleaning for all main body volume, level adjustment, cutoff characteristic inspection, specification inspection)
Accessories: copy of the instruction manual, connection cable, power cable
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply unit) W101 x H101 x D256 mm 2.2 kg
Significantly reduced price. 2021/06/07 Selling price 348,000 yen. Mark Levinson fan coveted electric crossover 2-way 300Hz specification From the feel of knob that seems to be a yamituki, you can see the goodness of early Levinson's creation. Levinson's unique timbre makes me listen to it in dense even the divider. (Yukishi Fujisawa)
Maintenance information: 2016.1.7 Maintenance (Power supply unit replacement for negative voltage drop, Condenser is replaced with sprugs, 4 Borium main unit contact cleaning, Vernier dial disposition (Correction, Crossover Characteristic Inspection, Spec Inspection)
Accessories: instruction manual, power cable, 3 pairs of remo pins
Main Specifications: 2-Way 300Hz Closed Module Type RCA Input/Output Size (Body) W483 × H51 × D156mm 2.8 kg Size (Power Supply) W101 × H101× D256mm 2.2 kg