Maintained by the manufacturer in 2014. It is an open reel deck that is easy to handle and has excellent functionality and sound quality. The TEAC sound is clear and has good visibility, but the thickness is just right, so you can fully enjoy the analog feel. In addition to corrosion and paint deterioration on the exterior and plating part, characters disappear on part of the meter, there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2014.10.28 manufacturer maintenance completed (mechanical parts replacement, mechanical ASSY disassembly/cleaning/lubrication, implementation of each SW/VR, and jack contact correction, and other parts cleaning/inspection/adjustment)
Accessories: No. 10 clamper
Main specifications: 4 tracks, 2 channels, 6 heads (recording x 2, playback x 2, erase x 2), maximum use reel No. 10 tape speed 19/9.5 cm/sec W432 x H440 x D210 mm 20.0 kg
Maintained! This is the X-2000R, the highest model in the X series. It boasts performance that surpasses the X-1000R, such as the CA (cobalt amorphous) head and newly designed equalizer amplifier, etc., and you can hear damped sound with little noise due to the DBX installation. ※No clampers. There is a feeling of use, such as paint peeling off the switch slightly and white stains on the power cord. Serial 315084 (Takasaki Atsushi)
Maintenance information: 2023.7.8 Maintained (pinch roller drive mechanism disassembly cleaning and oil application, pinch roller shaft cleaning and oil application. Capstan belt replacement and flywheel shaft cleaning and oil application, pinch roller shaft cleaning and roller check and cleaning treatment. PLAY operation key knob detachment repair treatment. Right reel motor internal cleaning repair and drive current control circuit part repair (transistor replacement, resistor replacement). Tension arm shaft cleaning, guide roller part cleaning, oil application, and tension arm joint replacement. Contact point cleaning treatment for FWD, REV playback and recording circuit switching operation switches and slide switches. Operation volume contact cleaning treatment. Head azimuth angle check and adjustment, FWD/REV playback level and recording level, recording bias check and adjustment, capstan motor speed check adjustment (within ± 0.5%). (Other than that, connector terminal solder reinforcement treatment, timer operation, DBX recording and playback operation tests are excellent.)
Accessories: manual copy ※ no clamper
Main specifications: 4 track, 2 channel stereo format W432 x H456 x D268 mm 21.0 kg
Maintained. This is the X-2000R, the best model in the X series. It boasts performance that surpasses the X-1000R, such as a CA (cobalt amorphous) head and a newly designed equalizer amplifier, and you can listen to damped sounds with little noise due to the DBX installation. There are stains and bumps on the exterior. Serial 20066 (Tamura Eiji)
Maintenance information: 2024.4.18 Maintained (flywheel detachable cleaning and capstan shaft cleaning oil applied, capstan belt replacement, grease applied to the foot wheel stator bearing part. Pinch roller drive mechanical disassembly cleaning and grease application, pinch roller cleaning and pinch roller shaft oil application, tape pass check. Head cleaning and head azimuth angle check adjustment. Left and right impedance roller detachment fall cleaning and oil application, left and right tension arm detachment cleaning and cushion replacement, tension sensor cleaning, and tension roller shaft cleaning oil application. Reel stand tension adjustment (FWD/REV-PLAY winding tension and tension adjustment during FF/ REW) playback and recording AMP electrolytic capacitor check and partial replacement, meter lamp, DBX display lamp replacement, replacement procedure due to deterioration of power supply protection resistance. MIC, LINE, OUTPUT volume contact cleaning Contact cleaning by detaching and disassembling the monitor SW, REC mode SW, tape bias selector SW, and DBX SW. Playback level check and adjustment, recording level and vise check and adjustment, DBX amplifier level check and adjustment, recording and playback tests are excellent. Left and right legs missing additional reference value W&F during self-recording and playback (0.02% (WTD))
Accessories: clamper
Main specifications: 4-track, 2-channel stereo format, W432 x H456 x D268 mm, 21.0 kg