Refreshment maintenance with attention to detail has been completed, from the exterior to custom-made silicone edge replacement, banana plug compatible SP terminal replacement, etc. A rare Yamaha floor-type speaker system is in stock. The low frequencies are strong and clear, and the sharpness can be felt even in the mid to high frequencies. The way the NS-1000M sounds has been scaled up even further with a cab that is about two times larger (Murakoshi Yoichi)
Maintenance information: 2023.4.10 maintenance (exterior repair, polishing, clear finish)
Front and rear baffles/hakama repair/painting, saran net replacement, woofer maintenance (one-side fixation repair, custom-made silicone edge replacement, center exit operation confirmation).
Accessories: saran net
Main specifications: 3-way, 3-speaker, bass reflex system, floor-type usage unit, 36cm cone type for low frequencies
(JA-3601), 8.8 cm dome type for the middle range (JA-0802), 3 cm dome type for high frequencies (JA-0526) playback frequency band 30 Hz to 20 kHz maximum allowable input 100 W output sound pressure level 91 dB/W/m W588 x H867 x D442 mm 62 kg
*Currently sold because it is inexpensive. An easy-to-use CD-R recorder with a built-in hard disk. You can import from CD to hard disk at up to 10x speed, and write to CD at 8x speed from hard disk. It is recommended for those who want to enjoy putting together sound sources from other media. There is a scratch on the top plate (Daiki Goto)
Maintenance information: 2023.3.20 operation confirmed
Accessories: remote control, copy of instruction manual
Main specifications: built-in HDD 3.5 inch Seagate Barracuda 7200.10 80GB playback media CD (playback only) CD-R for music CD-RW for music frequency characteristics 5 Hz to 20 kHz ± 0.5 dB (EIAJ) dynamic range playback 99 dB/recording 93 dB (EIAJ) SNR playback 105 dB/recording 92 dB (EIAJ) power consumption 28 W size W435 x H115 × D414.5mm weight 8.3 kg
Replace deteriorated parts and refresh! The clear and refreshing sound has come back to life. This is the third generation model in the CA-1000 series. Even though the specs of the CA-2000 were downgraded, the sound characters are the same. It is also convenient to be able to switch instantaneously between Class A operation and Class B operation by switching. On the exterior, there is a feeling of use over time, such as dullness and small scratches scattered around. Serial 10233 (Asae Tomonori)
Maintenance information: 2023.3.25 Maintained (chemicon, transistor, heat dissipation sheet, SP terminal, RCA terminal, semi-fixed resistor, relay, resistor, diode, fuse, operational amplifier, meter lamp replacement. VR contact cleaning, SW ultrasonic cleaning. Resolder substrates and remove flux. (Semi-fixed VR adjustment, in-flight cleaning, waveform check, input/output check, various function checks F special confirmation, input/output waveform confirmation, load test)
Accessories: copy of instruction manual
Main specifications: 100W+100W during Class B operation (8Ω) 20W+20W during Class A operation (8Ω) Phono MM/MC compatible W461 x H170 x D360 mm 19 kg
*Currently on sale. A miniature version of the masterpiece speaker NS-1000M. A small speaker system developed for theater sound. The bright and sharp sound quality is attractive (Katsutsugu Hiura)
Maintenance information:2023.3.12 sound output confirmed
Accessories: Saran net connection cable source box
Main specifications: 3-way sealed (anti-magnetic) 6Ω playback frequency band 70 Hz to 24 kHz W150 x H275 x D180 mm 3.0 kg
*Currently on sale. A subwoofer system with a built-in power amplifier using Yamaha's unique YST system. The thick, voluminous bass is excellent for reproducing movies and live sound sources. It is a heavy construction using the same wood as the GT track. There is a small scar (Sasaki Shota)
Maintenance information: 2023.3.7 operation confirmed
Accessories: remote control
Main specifications: floor type anti-magnetic design amplifier output 120W cutoff frequency 30Hz to 130Hz power consumption 100W dimensions W580 x H440 x D440 mm weight 48 kg
*Currently on sale. Rubber feet are attached. A subwoofer system with a built-in power amplifier using Yamaha's unique YST system. The thick, voluminous bass is excellent for reproducing movies and live sound sources. It is a heavy construction using the same wood as the GT track. There are slight dullness, scratches, etc., but the condition is relatively good (Daiki Goto)
Maintenance information: 2023.2.25 operation confirmed
Accessories: remote control
Main specifications: floor type anti-magnetic design amplifier output 120W cutoff frequency 30Hz to 130Hz power consumption 100W dimensions W580 x H440 x D440 mm weight 48 kg
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room or speaker. It is ideal for medium speakers such as the NS-1000M. As for the exterior, the position of the logo is different on the left and right, and there is a feeling of use due to age, such as dullness and small scratches. A seat is attached to the bottom (Daiki Goto)
Accessories: none
Main specifications: W370 x H250 x D290 mm 6.5 kg
The price has been drastically reduced. 2022/12/31 Sales price 10,000 yen Large steel speaker stand with unknown details. The construction is quite heavy. The previous owner seems to have mounted a YAMAHA NS-1000. On the exterior, you can see rust, scratches, etc. (Satoshi Yonejima)
Accessories: no accessories
Main specifications: top plate: W238 x D238 mm bottom plate: W460 x D460 mm total height 425 mm weight 8.9 kg