Audio-Technica's popular record stabilizer. It is thick and heavy, so sound quality can be expected to improve. It is recommended to use it together with stabilizer AT673, etc. The condition is generally good (Yamato Yuki)
Accessories: none
Main specifications: aluminum alloy plate diameter 289 mm H x outer circumference 7 mm inner circumference 4.5 mm weight 980 g
The price has been reduced. 2024/10/19 sales price 47,000 yen This is a dedicated analog disc input board for Accuphase. Equipped with a high performance high gain equalizer. The internal dip switch makes it possible to switch between MM and MC, set MC input impedance, and the subsonic filter ON and OFF. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.10.19 Operation confirmed (on E-480)
Accessories: original box
Main Specifications: MM/MC compatible phono equalizer board compatible models/E-308 E-408 E-213 E-260 E-360 E-460 E-406V E-250 E-350 E-450 E-470 E-530 E-550 E-560 E-600 C-2120 C-2110 C-2000 C-245 CX-260
The price has been reduced. 2024/10/19 sales price 64,800 yen Accuphase digital input board. A D/A conversion board equipped with coaxial, optical, and USB terminals. You can enjoy high-quality music playback with high-resolution data by plugging into the company's compatible device and connecting the music library downloaded to the PC with a USB cable. It has an automatic coaxial/optical input switching function. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.10.19 Operation confirmed (on E-480)
Accessories: utility CD, instruction manual, original box
Main specifications: Coaxial 32 to 192 kHz/24 bit, Optical 32 to 96 kHz/24 bit, USB 32 to 192 kHz/24 bit compatible model preamps C-2000, C-2110, C-2120, C-245, CX-260. Pre-main amplifiers E-213, E-250, E-260, E-307, E-308, E-350, E-360, E-370, E-408, E-450, E-460, E-470, E-530, E-550, E-560, E-600
XLR cable 3ch line selector. High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.10.20 Continuity confirmed (No. 1 has continuity regardless of the selector)
Accessories: none
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
※It is inexpensive because the bottom is in poor condition, such as stickiness due to butyl rubber. Set of 8 DIATONE wooden block ACOUSTIC CUBE DK-5000. The dense composite material has an attractive natural sound. It can be used in a variety of ways, from medium to large speakers. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W90 x H90 x D90 mm Weight approx. 360 g
※It is inexpensive because it leaves some traces of butyl rubber. A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. Ideal for medium speakers such as the NS-1000M. You can see a feeling of use such as appearance, stickiness, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W370 x H250 x D290 mm 6.5 kg
If you're looking for a pair of BOSE baton hanging brackets, take this opportunity! You can see a feeling of use such as rust on the entire surface, dullness on the exterior, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Compatible models: 100J/PR, 101 IT/IT-W, 101 MM, 101 MM CC/CO, 101 MM, 101 MM, STAGE, 101 MMG, 101 MMW, 101 TR, 101 VM, 111 AD/ADW, 111 PYB/PYW, 120/120S, 121/121V, 201AVM, 201MM, 214, 300 PM
Set of 4 Y lug plugs are rhodium plated banana plugs that have been rhodium plated to prevent aging and maintain a stable connection. There is dullness and slight oxidation (Fujisawa Yukishi)
Accessories: No accessories
Set of 4 Y lug plugs are rhodium plated banana plugs that have been rhodium plated to prevent aging and maintain a stable connection. There is dullness and slight oxidation (Fujisawa Yukishi)
Accessories: No accessories
※There is no problem with the current operation, but since it is cheap, it will be handed over as is. As for the sound quality, I have the impression that the amount of information has increased as the turbidity has disappeared and the quietness has increased. This item has luster for vocals and stringed instruments, and can easily change the sound. Since it has an analog output, it can also be used as a USB DAC. ※The USB 2 input is a bit difficult to handle. Serial 700406 (Fujisawa Yukishi)
Maintenance information: 2024.10.19 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: digital input/USBx2 system (switch switching) digital output SPDIF RCA, SPDIF, BNC, AES/eBUx3 system (simultaneous output), analog output RCAx1 system external clock input automatic detection switching external clock input: BNC unbalance 75Ω/44.1kHz 48kHz 96kHz square wave and sine wave frequency characteristics 10Hz to 37kHz (-3dB) W190xH56xD220mm 950g
The price has been reduced! 2024/10/13 sales price 18,000 yen A balance line selector that uses high quality parts everywhere. There are 3 types: 1 input and 1 output. The terminal uses a high quality gold-plated XLR jack, and it is a very high quality selector that is particular about sound quality at a low price, and does not make you feel any deterioration in sound quality. (YONEJIMA Satoshi)
Maintenance information: 2024.10.13 operation confirmed
Accessories: instruction manual
Main specifications: multi-changer (1 input, 3 output types), gold-plated XLR terminal, mechanical (rotary) switch/non-shorting switching/simultaneous H/L/COM switching, W200 x H70 x D142 mm, 1.05 kg
YAMAHA speaker stand. The compact stand is made to feel rigid, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate part W190W x D175 mm body W270 x H494 x D350 mm 7 kg
Diatone iron stand It is a stand that is sufficient to install even medium speakers such as the DS-77. The height can also be adjusted, and casters are included, making it very easy to use. You can see a feeling of use on the exterior, such as dullness, rust, scuffs, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: speaker installation surface depth 320 mm height adjustment range 143 to 383 mm 20 mm pitch W320 x H690 x D448 mm approx. 5.2 kg
ORB's 6-port rhodium plated model high purity jewelry use rhodium plating is applied to the outlet and inlet. I have the impression that the way the low frequencies come out, especially the sharpness of the bass, etc., improves. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: original box, instruction manual, power cord
Main specifications: rated AC125V, 15A, maximum 1500W, 1 input system/6 output systems, W260 x H60 x D165 mm, approx. 2 kg
This is a long-selling Technica disc stabilizer model. Flatten the board without putting a strain on the motor with just the right amount of weight (Murakoshi Yoichi)
Accessories: original box, instruction manual
Main specifications: diameter 80 mm x H29 mm brass block shavings 600 g
The price has been reduced! 2024/10/14 sales price 39,800 yen Heavy specification with two magnesium struts. The top plate bottom plate has a structure made of aluminum and steel plywood. Ultrafine sand is encapsulated inside the pillar and thorough anti-vibration treatment is applied. There is slight dullness, but it is relatively good. (FUJISAWA KOSHI)
Accessories: spikes
Main specifications: top plate W190 x D240 mm bottom plate W220 x D270 mm height 700 mm weight 14.1 kg/bottle, load capacity 50 kg or less (1 bottle)
The disposal price has been reduced! (Member prices are not applicable) 2023/11/7 sales price 79,800 yen ※It is cheap because the condition is not very good. Comes with an ottoman. Among the company's many Stressless chairs, it is the most compact model and has a simple design that fits any room. It supports your lower back with a firm sitting comfort. On the exterior, the leather is worn and has wrinkles and peeling. (Miura Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm seat height 380 mm ottoman: W550 x H400 x D420 mm
The disposal price has been reduced! (Member prices are not applicable) 2022/12/3 sales price 49,800 yen ※The leather part is in a fairly poor condition with cracks, wrinkles, peeling seams, etc., so it's cheap. Many audiophiles love this recliner. You can easily set the reclining position with adjustments under the left and right handrails. I definitely recommend it for relaxing listening to music at home. The leather color is black, and the base color is brown, giving it a relaxed atmosphere. Comes with an ottoman The seat surface is also depressed due to deterioration (Murakoshi Yoichi)
Accessories: ottoman
rubber stabilizer. It is made of conductive rubber, has an antistatic effect, and comes with a stroboscope. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: 50/60 Hz, external dimensions: diameter: 70 x thickness: 15 mm, weight: approx. 63.0 g
The disposal price has been reduced. Member discounts are not applicable. 2024/8/4 sales price 15,000 yen. A wood cabinet that can be used with Marantz amplifiers from around the superscope era. Secure it to the 4 corners of the front panel with 391 mm wide and 145 mm high with wood screws. There are deformation in the exterior and upper net, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: W453 x H178 x D262 mm 2.0 kg
Speaker cover with a waterproof polyester construction. For large speakers equipped with a 12 inch unit. It is supposed to fit QSC K12, Turbosound iQ12, Yamaha DRX12, etc., but if it is an individual with a square top plate, it fits an individual about W320 x H580 x D230 mm in actual measurement (Kobayashi Hitoshi)
Accessories: none
Speaker cover with a waterproof polyester construction. For small speakers equipped with an 8 inch unit. It is said to fit Turbosound iQ8, Yamaha DRX8, etc., but according to actual measurements, it fits individuals about W240 x H440 x D240 mm in size (Kobayashi Hitoshi)
Accessories: none
Arm base that can be used with PD-171AL. The arm can mount an Ortofon AS-212D AS-212S. Heavy arm base with chrome plated spin finish on 20mm thick brass. If you're thinking about replacing an arm, don't miss it! There are no noticeable scratches on the exterior (Yamato Yuki)
Accessories: original box instruction manual wrench screw
Main specifications: brass, chrome plated, spin finish, diameter 105 x height 20 mm, weight: 1,105 g
Audio-Technica's long-selling needle tip cleaner. Gently clean the needle tip from the cantilever side forward with a brush fixed to the lid. This will extend the life of the cartridge. The liquid has hardly decreased (Murakoshi Yoichi)
Accessories: original box
Dry record cleaner made with premium velvet. The shape is easy to hold, and records can be cleaned effectively. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
The price has been drastically reduced. 2022/8/23 UK Watts record cleaner with sales price 3,000 yen. This is a wet cleaner that is used by soaking water into the core. The exterior has a feeling of use. Dirt is conspicuous on the core (Hiura Katsuji)
Accessories: none
Main specifications: Dimensions: Diameter: 25 x Width: 105 mm; Weight: 15 g (actual measurement)
Comes with original box. Genuine Fostex speaker grille. Made with a high-precision resin frame and steel mesh grille. Compatible with FE-126en, FF-125WK, etc. (FUJISAWA KOSHI)
Accessories: original box, instruction manual
Nagaoka record cleaner using Italian velvet. The exterior shows a feeling of use such as dullness, etc., and wear on the velvet (Asaine Tomoho)
Accessories: none
Set of 4 spike plates from TAOC It is placed under spike-shaped legs to prevent damage to the floor and is effective in damping and stabilizing vibration. Stable mid and low frequencies can be obtained. Spike marks are conspicuous on the exterior, and the original box is also damaged (Mizusaki Ryo)
Accessories: original box
Main specifications: gradation cast iron diameter 40×H16mm 130g/piece
Set of 4 spike plates from TAOC It is placed under spike-shaped legs to prevent damage to the floor and is effective in damping and stabilizing vibration. Stable mid and low frequencies can be obtained. Spike marks are conspicuous on the exterior, and the original box is also damaged (Mizusaki Ryo)
Accessories: original box
Main specifications: gradation cast iron diameter 40×H16mm 130g/piece
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug. You can see the exterior, slight dullness, and a feeling of use (Murakoshi Yoichi)
Accessories: none
Unspecified granite board. It is polished on 5 sides. Use it for amplifiers, CD players, medium speakers, etc. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Main specifications: W453 x H20 x D453 mm 9.4 kg (all actual measurements)
Pioneer speaker stand. The size is just right for small to medium speakers such as the SX-3. It is made of wood and has a thickness of 25 mm and is sturdy. Since it is divided in two, there is no need to worry about storage space. You can see a feeling of use such as appearance, dullness, and bruises (Kobayashi Hitoshi)
Accessories: none
Main specifications: W370 x H210 x D310 mm approx. 3.1 kg
A speaker stand with just the right height for small speakers, etc. The legs look like spikes and have 4 points of support. The exterior has dullness, dirt, and scratches (Tamura Eiji)
Accessories: none
Main specifications: Top plate: W200 x D220 mm Overall: W290 x H645 x D305 mm
The disposal price has been reduced. Member prices are not applicable. 2022/10/1 sales price 20,000 yen arm base with unknown details. It is similar to a micro A-1201, etc., but the diameter of the hole is about 19 mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2024/8/6 sales price 18,000 yen crossover 10,000 Hz board. Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: none
Main specifications: Compatible models F-5/F-15/F-15L attenuation characteristics -12, -18 dB/oct 10,000 Hz
The disposal price has been reduced. Member prices are not applicable. 2024/8/6 sales price 15,000 yen This is a crossover board crossover frequency of 1000 Hz for the F-5/F-15. The damping slope can be changed with an internal switch (Oikawa Tetsuji)
Maintenance information: 2024.8.6 operation confirmed
Accessories: original box
Key Specifications: Chamdeber Board for Crossover 1200Hz
The disposal price has been reduced. Member prices are not applicable. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel has a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmφbase, machined stainless steel, 340 g, mounting board hole, φ25 mm, mounting board thickness ~ 20 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/7/11 sales price 10,000 yen. This is a phase plug for the B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. The degree is generally good (Takasaki Atsushi)
Accessories: none
Main specifications: 227g/piece
High rigidity aluminum body & OFC cable. 4-port 3P outlet specification. A 3P outlet made by Matsushita Electric Works, which has a reputation for sound quality, is used, and a 3mm thick extruded aluminum body is used to prevent the effects of magnetic fields (Daiki Goto)
Maintenance information: 2024.9.22 continuity confirmed
Accessories: none
Main specifications: rated voltage AC100V 50/60Hz total rated power 1,500W (15A) outlet P x 4 port power cable length 1.8 m W280 x H50 x D70 mm weight approx. 1,140 g
It is a wooden board that pursues natural sound. Using laminated maple wood, it gives off a natural, warm and delicate feeling. Scratches are conspicuous (Daiki Goto)
Accessories: none
Main specifications: W480 x H35 x D400 mm 3.8 kg (actual measurement)
The disposal price has been reduced! (Not eligible for member discounts) 2024/9/5 sales price 75,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The supports are filled with filler (sand). The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The price has been reduced. 2024/3/6 sales price 3,500 yen. ※1 adapter is missing. FINSIX ultra-compact AC adapter for laptops. Compatible with many PCs by replacing the conversion plug. How about a companion to PC audio (Murakoshi Yoichi)
Maintenance information: 2022.1.19 Operation confirmed
Accessories: instruction manual, power cord, original box, 9 types of adapters
Main specifications: 65W 85g
A large self-made audio board with a sturdy wooden board sandwiched between a floor mat and felt. It was created by the previous owner for TANNOY Westminster. As for the exterior, there is a feeling of use such as scratches on the bottom (Tamai Jun)
Accessories: none
Main specifications: size W1040 x D700 x H23 mm weight 8.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/6 sales price 7000 yen TOPPING USB isolator. This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box