It has been maintained. A model commemorating the 100th anniversary of Yamaha's founding. This time, it will be a set with a dedicated stand SPS-10000. Similar to the NS-2000 and NS-1000X, it consists of a carbon fiber unit and a unit using beryllium, and both digital and analog sources are thoroughly realistically reproduced. It is a full-body speaker that is thoroughly particular about even the smallest parts. The appearance is dull in the frame. Serial 100112 (Satoshi Yonejima)
Maintenance Information: 2022.4.25 Maintained (speaker terminals polished, retightened. Redo the connection between the one-sided MID capacitor and the resistor. Characteristics are measured and the original capacitor is continued to be used for good results. Check the sound is OK. Exterior repair, polishing, clear finish (including stand) Saran net reupholstery, frame repair. (Unit detachment/unit frame cleaning)
Accessories: Saran net
Main specifications: [NSX-10000] 3-way, 3-speaker, sealed system, bookshelf type use unit/for bass: 33cm cone type for medium: 8.8cm dome type for treble: 3.0cm dome type Rated Allowable Input 125W Music Allowable Input 250W 6Ω 90dB Playback Frequency Band 35Hz to 20,000Hz Crossover Frequency 500Hz/5,000 Hz Minimum Resonance Frequency 35Hz W450 × H752 × D410 mm 54 kg [SPS-10000] W446.5 × H250 × D367 mm Weight 14.5 kg
Exterior and internal maintenance completed! Yamaha's 100th anniversary commemorative model. Similar to the NS-2000 and NS-1000X, it consists of a carbon fiber unit and a unit using beryllium, and reproduces both digital and analog sources thoroughly and realistically. It is a whole body speaker with a thorough attention to even the smallest parts. The appearance is beautiful. Serial 101037A/101037B (Satoshi Yonejima)
Maintenance information: 2021.9.9 Maintained (polished and retightened due to darkening of speaker terminals. Perform characteristics measurement and continue to use original capacitors for good results. Check the sound is OK. Exterior repair, polishing, clear finish Saran net reupholstery and frame repair
(Unit detachment)
Accessories: saran net, instruction manual
Main specifications: 3-way, 3-speaker, sealed system, bookshelf type use unit/For bass: 33cm cone-shaped for medium tone: 8.8cm Dome type For treble: 3.0cm Dome type Rated allowable input 125W Music Allowable Input 250W 6Ω 90dB Playback Frequency Band 35Hz to 20,000Hz Crossover Frequency 500Hz/5,000Hz Minimum Resonant Frequency 35Hz W450×H752× D410mm 54kg
A model commemorating the 100th anniversary of Yamaha's founding. Like the NS-2000 and NS-1000X, it consists of a carbon fiber unit and a unit using beryllium, and both digital and analog sources are thoroughly and realistically reproduced. It is a full-body speaker with thorough attention to even the smallest parts. There are small scratches on the appearance. Serial 101037A/101037B (Satoshi Yoneshima)
Maintenance information: 2021.12.14 Sweep test good 2021.9.9 Maintained (speaker terminal polishing, retightening. Perform characteristic measurements and continue to use the original capacitor for good results. Sound check is OK. Exterior repair, polishing, clear finish. Saran net replacement and frame repair. (Unit detachment)
Accessories: Saran net
Main specifications: 3-way, 3-speaker, enclosed, bookshelf type used unit/for bass: 33 cm cone type for medium sound: 8.8 cm dome type for treble: 3.0 cm dome type rated allowable input 125W Music Allowable Input 250W 6Ω 90dB Playback Frequency Band 35Hz to 20,000Hz Crossover Frequency 500Hz/5,000Hz Minimum Resonant Frequency 35Hz W450×H752× D410mm 54kg
Exterior and internal maintenance completed! Yamaha's 100th anniversary commemorative model. Similar to the NS-2000 and NS-1000X, it consists of a carbon fiber unit and a unit using beryllium, and reproduces both digital and analog sources thoroughly and realistically. It is a whole body speaker with a thorough attention to even the smallest parts. The appearance is beautiful. Serial 101047A 101047B (Asaine Satoshi method)
Maintenance information: 2021.10.24 Maintained (exterior repair (touch-up, dent repair), partial polishing, painting saran net replacement unit maintenance (woofer cleaning center Adjustment, polishing all unit frames, creating one grille dowel) Unit detachment) Speaker terminal polishing for darkening, retightening. Since rust appeared in the parallel wiring of the capacitor, we removed it, measured the rust inhibitor coating characteristics, and continued to use the original capacitor for good results. Sound output confirmation) Tweeter disconnection repair (disassembly, disconnection location identification, remove corroded part and connect with lead wire to insulate fix, magnetic circuit slit center out assembly operation check, input sine wave and check operation) tweeter distortion Repair (magnetic circuit cleaning, anti-rust, coil center-out adjustment set)
Accessories: saran net
Main specifications: 3-way, 3-speaker, sealed system, bookshelf type use unit/For bass: 33cm cone-shaped for medium tone: 8.8cm Dome type For treble: 3.0cm Dome type Rated allowable input 125W Music Allowable Input 250W 6Ω 90dB Playback Frequency Band 35Hz to 20,000Hz Crossover Frequency 500Hz/5,000Hz Minimum Resonant Frequency 35Hz W450×H752× D410mm 54kg
Exterior and interior maintenance completed! A model commemorating the 100th anniversary of Yamaha's founding. Similar to the NS-2000 and NS-1000X, it is composed of a carbon fiber unit and a unit using beryllium, and both digital and analog sources are thoroughly reproduced realistically. It is a full-body speaker with thorough attention to even the smallest parts (Fujisawa Yukishi)
Maintenance information: 2022.12.7 maintenance completed (exterior repair/cleaning, top plate polishing/painting, saran net replacement, unit frame cleaning, network maintenance)
Accessories: Saran net
Main specifications: 3-way, 3 speakers, sealed system, bookshelf type use unit/for bass: 33cm cone type for mid-range: 8.8cm dome type for treble: 3.0cm dome type rated allowable input 125W music allowable input 250W 6Ω 90dB playback frequency band 35Hz to 20,000 Hz crossover frequency 500Hz/5,000 Hz minimum resonance frequency 35Hz W450 × H752 × D410mm 54 kg
Maintained! A model commemorating the 100th anniversary of Yamaha's founding. It is a wonderful power amplifier unique to the bubble period, where you can feel the luxury everywhere. The low range smoothly pushes out into the detailed mid-high range with good cuts and high resolution. As for the exterior, there is a scratch on the front. Serial E017907PR (Kimiya Miura)
Maintenance information: 2022.11.16 Maintained (RCA terminal installation insulation spacer replacement. SP terminal cleaning lubrication. Output relay and semi-fixed resistor exchange. The meter drive module was disassembled, solder corrected, and then reassembled. Other solder fixes. Tighten more screws. Bias and offset output audio check. *The negative speaker output side is not GND. Please do not share or ground. (Balanced configuration with Class AB amplifiers and Class A amplifiers)
Accessories: There are no accessories
Main specifications: 250W+250W (8Ω) hyperbolic Class A amplifier adopted W475 × H220 × D543 mm 43.0 kg
Yamaha's 100th anniversary model It is a stunning power amplifier unique to the bubble period where luxury is felt everywhere. A low range that extrudes smoothly into a fine-grained mid-high range with good cut and high resolution. It produces a beautiful sound quality that matches the appearance. The appearance is dull on the top plate, etc., and thin thread can be seen. Serial E016457PR (Satoshi Yonejima)
Maintenance Information: 2021.4.30 Operation confirmed
Accessories: Instruction manual
Main specifications: 250W+250W (8Ω) Hyperbolic A class amplifier adopted W475×H220 × D543mm 43.0kg
A model commemorating the 100th anniversary of Yamaha's founding. Like the CX-10000, Yamaha's highest-grade super dreadnought phono equalizer. It has a sense of transparency, and is attractive because it creates a natural, stress-free sound like Yamaha. The MC head amplifier has a luxurious structure, with 4 independent phono 1 and phono 2 units. The exterior is dull and has small scratches. Serial E017339QS (Kimiya Miura)
Maintenance information: 2023.8.27 Operation confirmed
Accessories: no accessories
Main specifications: MC high gain 60 μV/10 ohms, 30 ohms MC low gain 200 μV/30 ohms, 100 ohm mm/2.5 mV/47 kω/100 pf, 47 kω/330 pf W475 x H130 x D432 mm power consumption 20 W size W475 x H130 x D432 mm weight 20.0 kg
A model commemorating Yamaha's 100th anniversary. Like the CX-10000, Yamaha's finest super-grade phono equalizer. It has a sense of transparency, and is attractive because it creates natural, stress-free sounds like Yamaha. The MC head amplifier is equipped with 4 independent phono 1 and phono 2 units, making it a luxurious structure. The exterior is dull. Serial E016528ZP (Miura Kimiya)
Maintenance Information: 2022.10.31 Operation confirmed
Accessories: There are no accessories
Main specifications: MC high gain 60 μV/10 Ω, 30 Ω MC low gain 200 μV/30 Ω, 100 Ω mm, 2.5 mV/47 kΩ, 100 PF, 47 kΩ, 330 PF W475 × H130 × D432mm Power Consumption 20W Size W475 x H130 x D432 mm Weight 20.0 kg
Maintained! A premium control amplifier developed by Yamaha to commemorate the 100th anniversary of its founding. By installing an A/D converter, analog signals are also converted into digital signals, and digital control is possible through DEQ/DSP. Even though it is pre, it is firmly built with a 25kg skeleton. *Phonoico is not installed. The exterior has scratches and dents. Serial E017747PR (Kimiya Miura)
Maintenance information: 2022.11.16 Maintained (stripped the sealing material, rewired, resoldered. Connector cleaning. Press the button twice to turn REC OUT OFF. (Press once, the display flashes and becomes source selection mode, press again to turn off and the display disappears) Other 2ch and surround basic operation, remote control light reception test)
Accessories: remote control
Main specifications: DSP built-in parametric tone control non-contact VCA volume W475 x H177 x D442 mm 25 kg
* During surround output, there is a sound interruption when the volume is raised, but since ICs cannot be obtained, this is the current situation (there is no problem with the 2ch output) maintenance has been completed! A high-class control amplifier developed by Yamaha to commemorate the 100th anniversary of its founding. By installing an A/D converter, analog signals are also converted into digital signals, and digital control is possible through DEQ/DSP. Even though it's pretty, it's well-built with a 25 kg frame. ※Phonoico is not installed. As for the exterior, there are small scratches and dullness on the sidewood. Serial E0112606XZ (Tamura Eiji)
Maintenance information: 2023.9.21 Maintained (switch board pattern modified. Corrected because it's a film touch. * If you increase the surround output PRESENCE front right output volume, the sound will be interrupted and the IC cannot be obtained, so it will remain as it is. The 2ch output works fine. Other input/output operations have been checked)
Accessories: no accessories
Main specifications: DSP built-in parametric tone control contactless VCA system volume W475 x H177 x D442 mm 25 kg
Refreshment maintenance with attention to detail has been completed, from the exterior to custom-made silicone edge replacement, banana plug compatible SP terminal replacement, etc. A rare Yamaha floor-type speaker system is in stock. The low frequencies are strong and clear, and the sharpness can be felt even in the mid to high frequencies. The way the NS-1000M sounds has been scaled up even further with a cab that is about two times larger (Murakoshi Yoichi)
Maintenance information: 2023.4.10 maintenance (exterior repair, polishing, clear finish)
Front and rear baffles/hakama repair/painting, saran net replacement, woofer maintenance (one-side fixation repair, custom-made silicone edge replacement, center exit operation confirmation).
Accessories: saran net
Main specifications: 3-way, 3-speaker, bass reflex system, floor-type usage unit, 36cm cone type for low frequencies
(JA-3601), 8.8 cm dome type for the middle range (JA-0802), 3 cm dome type for high frequencies (JA-0526) playback frequency band 30 Hz to 20 kHz maximum allowable input 100 W output sound pressure level 91 dB/W/m W588 x H867 x D442 mm 62 kg
Refresh with internal and external maintenance! A rare Yamaha floor-type speaker system is in stock. The low range is powerful and clear, and you can feel sharpness and sharpness in the middle and high range. The NS-1000M is a cabin that is about two times larger, and the way it sounds is further scaled up (Yoichi Murakoshi)
Maintenance information: 2021.11.20 Maintenance (exterior repair, polishing. Replaced new terminals. ATT contact cleaning Input/output waveform and balance check, sound output check. A frequency characteristic measurement check (~ about 42kHz) is performed, one defective piece is replaced on both sides, and the other capacitors are original (the capacitor before replacement is left inside because it is difficult to remove). (Mid tweeter magnetic circuit gap cleaning, unit frame painting.)
Accessories: None
Main specifications: 3 way, 3 speakers, bass ref system, floor type unit, 36 cm cone type for low range
(JA-3601), 8.8cm dome type for middle range (JA-0802), 3cm dome type for high range (JA-0526) playback frequency band 30Hz to 20kHz maximum allowable input 100W output sound pressure level 91dB/W/m W588 × H867 × D442mm 62kg
Maintained Good degree. A high-end control amplifier developed by Yamaha to commemorate the 100th anniversary of its founding. By installing an A/D converter, analog signals are also converted into digital signals and can be digitally controlled through DEQ and DSP. It is made firmly with a 25kg skeleton even though it is pre-made. * Phonoico is not installed. (Sasaki Shota)
Maintenance information: 2021.12.12 Maintained (motor drive volume disassembly repair. (IC defect replacement of DAC in DSP circuit.)
Accessories: remote control, description, original box, connection cable
Main specifications: DSP built-in parametric tone control non-contact VCA volume W475 × H177 × D442mm 25kg
A high-end control amplifier developed by Yamaha to commemorate its 100th anniversary. Analog signals can also be converted into digital signals by incorporating an A/D converter and can be digitally controlled via DEQ and DSP. It is firmly built in the core of 25kg while pre-. *Phonoico is not installed. Appearance, there are small scratches, thin thread. Serial E015296XZ (Satoshi Yonejima)
Maintenance Information: 2021.4.30 Operation confirmed
Accessories: Remote control, instruction manual
Main Specifications: DSP Internal Parametric Tone Control Non-Contact VCA Volume W475×H177 × D442mm 25kg
The price has been reduced. 2021/2021/10/25Sales price 298,000 yen Refresh with internal and external maintenance! A rare Yamaha floor-type speaker system is in stock. The low range is strong and clear, and you can feel sharpness and sharpness even in the middle and high ranges. The NS-1000M is about two times bigger, and the way it sounds is scaled up further. Serial 10108L 108R (Atsushi Takasaki)
Maintenance information: 2021.10.24 Maintained (exterior repair, polishing, clear finish, front and rear baffle/hakama repair/painting, saran net replacement, woofer maintenance (edge replacement, frame Painting), mid-maintenance (frame painting, one-side disconnection repair, magnetic circuit gap cleaning, center adjustment), tweeter frame painting, network maintenance (terminal new replacement. ATT contact cleaning Input/output waveform and balance check, sound output check. Frequency characteristic measurement check (~ 42 kHz) is performed, one defective is replaced on both sides, and the other capacitor is used original (the capacitor before replacement is left inside because it is difficult to remove), unit desorption)
Accessories: Saran net
Main specifications: 3-way, 3-speaker, bass referral system, floor type unit, 36cm cone type for low range
(JA-3601), 8.8 cm dome type for mid range (JA-0802), 3 cm dome type for high frequency (JA-0526) Playback frequency band 30Hz to 20kHz Maximum allowable input 100W Output sound pressure level 91dB/W/m W588 × H867 × D442mm 62kg
It's been maintained! A brother machine that used the same unit as the company's NS-1000M in an ebony-finished enclosure. It is compatible with any genre with clear outlines in the mid and high frequencies and clear low frequencies. The clear and transparent feeling, and the smooth driving force and connection of the top and bottom are very comfortable. The low range, which is richer in volume than 1000M, is a must-listen, and is a timeless masterpiece of quality that is placed at a glance even in modern times. It is finished neatly due to maintenance, but there are some scratches left on the top plate (Tetsuji Oikawa)
Maintenance Information:2021.3.23 Maintained (exterior repair (top plate/bottom repair/painting)
Network maintenance (ATT contact cleaning. Frequency characteristic measurement check (~ 42 kHz) is performed and there is no problem. (Phase, sweep, and song sound check OK.)
2019.4.3 Maintained (Jantzen CrossCap used capacitor replacement. Terminal replacement (compatible with banana plugs) ATT cleaning * Some capacitors before replacement are difficult to remove, so remove the wiring and leave them. Check input/output waveform and balance, and check sound output. Frequency characteristic measurement check (~ 42 kHz). Woofer fixation disassembly, rust prevention treatment, assembly, operation check. (Exterior repair/polishing/clear finish, saran net replacement, frame broken repair, unit frame/woofer cone paper painting, unit detachment)
Accessories: None
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz Dimensions W395 × H710 × D349 mm Weight 39 kg/book
* Refreshment maintenance has been meticulous, from all exterior repairs to the interior, including adjustments for each unit, networks, and attenuators! The vivid sense of dynamism and the crisp high-frequency stretch typical of Yamaha have been revived. It has a characteristic low frequency thickness not found in 1000 monitors. The clear sense of transparency, driving power up and down, and smooth connections are also extremely comfortable, and the heavy exterior with an ebony finish is a timeless masterpiece that stands out even today. There are light dents on the exterior, L-side woofer, and center cone, but the others are beautiful due to exterior maintenance (Kobayashi Hitoshi)
Maintenance information:2023.5.20 Maintained (exterior repair/polishing/clear finish
Rear baffle repair and painting. Saran net replacement and frame correction. Woofer cone paper paint, mid-maintenance (cleaning center adjustment within magnetic circuit gap) unit frame paint
Network maintenance (terminal replacement (banana plug compatible products). ATT contact cleaning. A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40 Hz to 20 kH sound pressure level 90 dB rated input 50 W maximum allowable input 100 W impedance 8 ohms crossover frequency 500 Hz/6 kHz dimensions W395 x H710 x D349 mm 39 kg
Maintenance has been completed! It achieves both a vivid sense of dynamism and the crisp high range elongation typical of YAMAHA. The thickness of the low frequencies that 1000 monitors do not have is a characteristic. The clear sense of transparency, the upper and lower driving force and the smoothness of the connection are also very comfortable, and the profound appearance of the ebony finish is also a timeless masterpiece that is placed at a glance even today. There are some small scratches and bruises on the exterior. Serial 11584L, 11584R (Yamato Yuki)
Maintenance info: 2021.4.6 Operation confirmed
2017.8.8Maintained (exterior polishing, full coating, deep line scratches, chipping, veneer peeling repair, saran net replacement woofer cone paper, unit frame painting, grille, woofer center, dome dent Correction unit detachable terminal replacement (banana plug compatible product) ATT cleaning capacitor replacement* Some capacitors before replacement are difficult to remove, so remove the wiring to check the remaining input/output waveform and balance, Sound output check Frequency characteristic measurement check (~ approx. 42kHz)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz Dimensions W395 × H710 × D349 mm Weight 39 kg/1 bottle
Maintenance has been completed! It achieves both a vivid sense of dynamism and the crisp high range elongation typical of YAMAHA. The thickness of the low frequencies that 1000 monitors do not have is a characteristic. The clear sense of transparency, the upper and lower driving force and the smoothness of the connection are also very comfortable, and the profound appearance of the ebony finish is also a timeless masterpiece that is placed at a glance even today. There are some small scratches and bruises on the exterior. Serial 11584L 11584R (Yamato Yuki)
Maintenance information: 2022.8.16 operation confirmed
2017.8.8Maintained (exterior polishing, full coating, deep line scratches, chipping, veneer peeling repair, saran net replacement woofer cone paper, unit frame painting, grille, woofer center, dome dent Correction unit detachable terminal replacement (banana plug compatible product) ATT cleaning capacitor replacement* Some capacitors before replacement are difficult to remove, so remove the wiring to check the remaining input/output waveform and balance, Sound output check Frequency characteristic measurement check (~ approx. 42kHz)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz Dimensions W395 × H710 × D349 mm Weight 39 kg/1 bottle
Interior and exterior maintenance have been carried out and brushed up. The vivid sense of dynamism and the stretchiness of the high frequencies with good sharpness typical of YAMAHA have been revived. It has a characteristic low frequency thickness not found in 1000 monitors. The clear transparency, driving force, and smoothness of the connection between the top and bottom are also very comfortable, and the heavy exterior with an ebony finish is a timeless masterpiece that is appreciated even today. Serial 11478R, 11478L (Miura Kimiya)
Maintenance information: 2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair and painting. Reupholster the saran net Unit frame paint Network maintenance (Since the terminals have already been replaced with external products, they are adjusted in the same direction, tightened, screw-fastener applied, and mounting screws replaced. Check the ATT contact status (check that there is no gap). Frequency characteristic measurement checks (~ approx. 42 kHz) were performed, and the results were good, so the original capacitor was continuously used. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: Saran net
Main specifications: 3 way sealed playback frequency band 40 Hz to 20 kH sound pressure level 90 dB rated input 50 W maximum allowable input 100 W impedance 8 ohms crossover frequency 500 Hz/6 kHz dimensions W395 x H710 x D349 mm 39 kg
Both the lively feeling of dynamism and the elongation of the high range that seems to YAMAHA have a crisp tooth. With a sense of speed in the middle and low range that is slightly different from 1000 monitors, the smoothness of the connection is also comfortable, and the heavy appearance of the ebony finish is also a timeless masterpiece. Appearance, there are a few scratches and scratches. Serial 14253 (Satoshi Yonejima)
Maintenance Information: 2021.5.1 Sweep Test Good. 2014.6.8 Maintenanced (Clear finish after exterior polishing, Saran net restraint. Tweeter unit: Center out adjustment network part: input terminal exchange (banana plug compatible), attenuator cleaning, capacitor exchange/AudynCap film capacitor x 10 Use, frequency characteristics measurement check (~42kHz) *Some parts are left inside because of difficulty removing the capacitor before replacement)
Accessories: Saran net
Main Specifications: 3-Way Enclosed Playback Frequency Band 40Hz to 20kH Sound Pressure Level 90dB Rated Input 50W Maximum Allowable Input 100W Impedance 8Ω Crossover Frequency 500Hz/6KHz Dimensions W395 x H710 x D349mm Weight 39kg/1
Maintenance has been completed! The vivid sense of dynamism and the high sense of resolution typical of YAMAHA are compatible. The thickness of the low frequencies that 1000 monitors do not have is a characteristic. The clear sense of transparency, the upper and lower driving force and the smoothness of the connection are also very comfortable, and the profound appearance of the ebony finish is also a timeless masterpiece that is placed at a glance even today. There are repair marks on the exterior. Serial 14253L 14253R (Satoshi Yonejima)
Maintenance information: 2022.9.11 Maintained (remove the protective net, clean the cone, disassemble the magnetic circuit. Peel and disassemble the back plate and magnet to remove rust. Anti-rust paint, adhesive. Magnetic Adhesion Center out adjustment adhesion with a special jig, and check the operation. Fixing disassembly repair set) 2021.5.1 maintained (exterior repair/polishing/clear finish, rear baffle repair/painting) 2014.6.8 maintained (clear finish after exterior polishing. Saran net replacement Tweeter Unit: Center Out Adjustment Network Part: Input Terminal Replacement (Banana Plug Compatible Product), Attenuator Cleaning, Capacitor Replacement/10 AudynCap Film Capacitors x 10 Use, frequency characteristic measurement check (~ approx. 42kHz) * Some capacitors remain inside because it is difficult to remove before replacement)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz Dimensions W395 × H710 × D349 mm Weight 39 kg/1 bottle
Maintained! This is Yamaha's luxurious CD player. The Yamaha sound is delicate and has a good tone, but it is a mass introduction model unique to the heyday of audio that also combines thick mid and low frequencies. It is a masterpiece CD player that is still popular today due to its high musicality. There are scratches on the sidewood and stains on the top plate (Oikawa Tetsuji)
Maintenance information: 2023.5.10 Maintained (all mold that has occurred inside was cleaned and removed, and the collapsed rubber roller was newly made of silicon rubber before being replaced and installed. Optical mechanism motor drive slider shaft applied with foam after polishing due to corrosion. To detect the position of optical pickup, the styder pod for mold generation was applied after organic preparation cleaning and alpha olefin oil was applied. All 10 keys have been replaced due to oxidation, and other switches with poor contact have been replaced. (Commercially available CD playback, search tests, no sound output abnormalities)
Accessories: instruction manual, remote control
Main specifications: W475 x H157 x D406 mm 25.5 kg