※Since the click volume and front LED lamps have been changed to those manufactured outside the company, they are inexpensive. This is Pass Lab's channel divider that first arrived at HIFIDO. It is set to 2 way/250 Hz specifications. Recommended for 4350 users. The frequency can be changed arbitrarily. There are small scratches here and there (Fujisawa Yukishi)
Maintenance information: 2023.11.8 operation confirmed
Accessories: power cord, connection cord (Misumi), connection cord (genuine), 2 frequency change manuals
Main specifications: 250Hz 18dB/OCT main body W432 x H88 x D320 mm Weight 7.5 kg Power supply unit W432 x H88 x D300 mm Weight 8.08 kg
A convenient channel divider with a variable crossover frequency. It is possible to use 2 ways in stereo and 3 ways in mono. If you already have one, you can step up to 3 ways. The sound quality is straight without any quirks. Does not damage the individuality of amplifiers and units (Ryo Mizusaki)
Maintenance information: 2024.3.14 storefront operation confirmed
Accessories: manual, power cable
Main specifications: XLR and 1/4 stereo phone plaque entry/exit card terminal W483 x H44 x D152 mm 3.6 kg
A convenient channel divider with a variable crossover frequency. It is possible to use 2 ways in stereo and 3 ways in mono. If you already have one, you can step up to 3 ways. The sound quality is straight without any quirks. Does not damage the individuality of amplifiers and units (Ryo Mizusaki)
Maintenance information: 2024.3.14 storefront operation confirmed
Accessories: manual, power cable
Main specifications: XLR and 1/4 stereo phone plaque entry/exit card terminal W483 x H44 x D152 mm 3.6 kg
The price has been reduced! 2023/3/17 sales price 99,800 yen Maintenance completed! 2/3 way commercial mono channel divider. The time alignment (phase axis) of each speaker unit can be adjusted by delaying the sound with a delay. It can be used for stereo with 2 units. The biggest appeal is that the crossover can be set arbitrarily, so you can create a sound that matches the characteristics of the unit you use and your preferences. It also has the push strength typical of professional use. I'll take a look at the small scratches (Fujisawa Yukishi)
Maintenance information: 2023.3.17 Maintained (Ronto VOL, switch, rear switch, etc. all cleaned. (Internal check, C, IC, etc. OK ~ operation check.)
2017.7.13 Maintained (push switch disassembled contact cleaning contact grease applied. Volume contact cleaning. LOW amplifier IC replacement (11180) (Frequency check, other inspections)
Accessories: power cord
Main specifications: crossover low/80/125/160/250/500/800Hz high/500/800Hz high/500/1250/1600/5000/8000 Hz W483 x H44 x D178 mm 4.1 kg/unit
The price has been reduced. 2022/1/27 sales price 99,800 yen 2/3 way compatible mono channel divider for business use. The time alignment (phase axis) of each speaker unit can be adjusted by delaying the sound with a delay. It can be used for stereo use with 2 units. The biggest attraction is that you can set the crossover arbitrarily, so you can create a sound that matches the characteristics of the unit to be used and to your liking. There is also a strength of push that seems to be used by professionals (Itsuro Mizushima)
Maintenance Information: 2018.12.6 Maintained (operation parts, switches, volume disassembly contacts cleaning. Each printed pattern power supply unit, other soldering correction rework. Transformer other fixed screw fastening retightening. I checked the filters. Clean the input/output terminals. (Good operation and output test)
Accessories: copy of instruction manual, power cable
Main specifications: Crossover Low/80/125/160/250/500/800Hz High/500/1250/1600/5000Hz W483 × H44 × D178mm 4.1kg/unit
2/3-way commercial mono channel divider The time alignment (phase axis) of each speaker unit can be adjusted by delaying the sound. Can be used for stereo use in 2 units. The biggest attraction is that you can optionally set the crossover, so you can create the characteristics of the unit used and the sound to your liking. There is also a professional push strength (Yosuke Kojima)
Maintenance Information: 2018.12.6 Maintenanced (operating parts, switches, volume disassembly contact cleaning. Each print pattern power supply unit, other soldering correction rework. Transformers and other fixed screw fastening and tightening. I checked the filter. Input and output terminal cleaning. (Good operation and output test)
Accessories: Instruction manual copy, power cable, 2 EQ cartridges
Main Specifications: Crossover Low/80/125/160/250/500/800Hz High/500/1250/1600/5000Hz W483 × H44 × D178mm 4.1 kg/unit
※ Passing status quo · low price for bad condition. 1U size 2-way channel divider Input and output terminals are XLR only, cross can be switched between 600Hz/900Hz/1.2kHz, and LEVEL control is possible respectively. Large feeling of use such as processing marks, scratches, dirt, rust etc. on the mounting hole. Serial 3Z0146 (Takasaki Takasaki)
Maintenance Information: 2021.3.24 Operation confirmed
Accessories: None
Main specifications: 600Hz/900Hz/1.2KHz switching W480 × H44 × D303mm 3.5kg
The disposal price has been reduced! (Member discounts are not applicable) 2021/6/11 sales price 79,800 yen Maintenance has been completed, but there are times when some problems appear in the HI PASS Hz CH 1 VOL, but this is the current situation That's it. Crown's 2-way variable channel divider All filters can be continuously changed from 20Hz to 20kHz, so you can set the optimal crossover frequency while emitting sound from the speaker. It can be used as a 2-way divider when using stereo and as a 3-way divider when using mono. There is a feeling of use. Serial 5435 (Takasaki Atsushi)
Maintenance information: 2021.6.11 Maintained (each SW, VOL cleaning, left and right level difference ±1 dB → the error of the VOL itself (please adjust with the input level VOL on the rear panel) There are times when HI PASS Hz CH 1 VOL gully contact is poor, and there are times when it comes to damage (VOL not available, not compatible) in case of future defects)
Accessories: English manual, 6 phone jacks
Main specifications: frequency characteristic 20Hz to 20kHz ±0.1dB (flat position, rated output) filter 18dB/oct (high pass and low pass are separated) SNR 113dB (20Hz to 20kHz Impedance Unbalance: 0 to 15.5 dB 10kωOr1mΩ Balance 20kΩ Power Consumption 2W Dimensions W483 x H90 x D133 mm Weight 2.7 kg
Discount price! (former price: 120,000JPY)
Vacuum bulb channel divider by UESUGI. The crossover frequency is fixed to 8,000Hz. Some parts of veneer are off.