HAMILEX audio rack. The dark brown look and the warmth of the wood create a calm atmosphere. Veneer peeling is scattered (Daiki Goto)
Accessories: instruction manual
Main specifications: W1050 x H479 x D480 mm weight 37 kg
※It is cheap because it is in poor condition and dowels are missing. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. There are many scratches, stains, dents, and scratches throughout (Oikawa Tetsuji)
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
※It is cheap because it is in poor condition and dowels are missing. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. There are many wounds (Oikawa Tetsuji)
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
※It is cheap because it is in poor condition and dowels are missing. Yamaha GT racks are highly rigid and have excellent earthquake resistance. The main body is made of particle board with a thickness of 50 mm, and it firmly supports even heavyweight amplifiers. There are many scratches, stains, dents, and scratches throughout (Murakoshi Yoichi)
Accessories: shelf
Main specifications: main body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
It is cheap because the manufacturer's logo is missing, scratches that are noticeable on the whole, and there is a hole in the bottom. Particle board with a body thickness of 50 mm firmly supports heavyweight amplifiers (Fujisawa Yukishi)
Accessories: None
Main specifications: body plate thickness 50 mm, medium plate thickness about 30 mm, W580 × H440 × D440 mm, Weight 31.5 kg
Hamilex audio rack with glass door There are 4 shelves, so you can store 5 lightweight equipment. The exterior has dullness and small scratches (Satoshi Yonejima)
Accessories: instruction manual
Main specifications: total load capacity approx. 100 kg W560 x D480 x H900 mm 35 kg
Urethane-coated wooden record rack assembled neatly with laminated wood. It is a rack where you can feel the goodness of construction that seems to support records firmly. There are light scratches and small scratches on the exterior (Satoshi Yoneshima)
Accessories: No accessories
Main specifications: Shelf spacing 330mm W390×H1,475×D400mm 23kg
An audio rack designed with the Eiffel Tower as a motif. The wiring on the back side is also easy and convenient. There are many abrasions on the shelves and frames (Murakoshi Yoichi)
Accessories: none
Main specifications: 170,240,240 mm from above shelf spacing (2 middle plates can be adjusted at a pitch of 4.5 cm) load bearing top, bottom plate 50 kg, middle plate 25 kg W609.4 x H779.5 x D518.3 mm
Comes with casters Hamilex horizontal open low board The glass rack has a stylish design to look at. It is recommended not only for televisions, etc., but also for installing audio. The appearance may include dirt and dullness. (Tamura Eiji)
Accessories: none
Main specifications: W1050 × D450 × H315 mm Weight about 28 kg
Set of 4 326mm poles for the Q4D and QAVM series racks. This length is useful when installing large power amplifiers. The exterior has a feeling of use such as dullness and small scratches (Jun Tamai)
Accessories: none
Main specifications: length 326 mm diameter 19 mm
Unspecified audio rack. Please note that the height of the inner plate is adjustable, but it is not possible to fix it. There are small scratches (Oikawa Tetsuji)
Main specifications: W560 × H526 × D491mm 12.3kg (actual measurement)
with spikes. As you can see, it looks like target audio. The size design is ideal for small amplifiers, etc. The exterior has line marks, stains, and oxidation (Tamura Eiji)
Accessories: none
Main specifications: W505 x H125 (including spikes) x D395 mm
* The logo is out of stock. It is inexpensive because it has a lot of feeling of use such as abrasions and corners. YAMAHA's GT rack with high rigidity and excellent earthquake resistance. The main body is 50mm thick particle board, which firmly supports heavyweight amplifiers. The replacement dowel is slightly larger, and the shelf board is slightly raised. There are many feelings of use such as abrasions and chips (Atsushi Takasaki)
Accessories: None
Main specifications: Body plate thickness 50 mm Medium plate thickness about 30 mm W580 × H440 × D440 mm Weight 31.5 kg
England, which is said to have good sound loss, is a simple rack for target audio. The frame is made of metal and the board is wood. There is a big scratch on the shelf board (Fujisawa Yukishi)
Accessories: none
Main specifications: plate spacing: approx. 340 mm, W510 x H500 x D410 mm (actual measurement), weight 7.9 kg
* It is inexpensive because the stack dowel is missing and there are some modifications on the back. ADK STC series rack units. There are no dowels for stacking, but stacking itself is possible. The exterior has line scratches and dullness (Tamura Eiji)
Accessories: no accessories
Main specifications: load capacity 100 kg Assembly dimensions W574 x H205 x D500 mm 11 kg
Unspecified audio rack. Please note that the height of the inner plate is adjustable, but it is not possible to fix it. There are small scratches (Oikawa Tetsuji)
Main specifications: W560 × H526 × D491mm 12.3kg (actual measurement)