Maintained by the manufacturer! This is Denon's popular phono motor DP-6000. Rotational blurring is extremely low, and it has a reputation for its high accuracy. There are stains, small scratches, and dirt on the exterior, but there are no noticeable scratches. S/N110521 (Murakoshi Yoichi)
Maintenance information: 2026.6.6 manufacturer maintained (transistor replacement. 33, 45 RPM, STOP button, lead SW cleaning.
Replace the power supply electrolyte capacitor. Electrolytic capacitor replacement for strobe lighting. Head clearance adjustment, speed adjustment. Inspection of each part, operation test.
Accessories: instruction manual (copy), transport screws
Main specifications: Phase-locked servo type direct drive (crystal control) AC servo motor turntable is made of die-cast aluminum with a diameter of 312 mm, compatible with 33 and 45 degrees of rotation, can be adjusted quickly, weight 8.8 kg
The disposal price has been reduced (member discounts are not applicable). 2026/7/15 sales price 198,000 yen Phono motor has been maintained with Denon service. Combining the acclaimed high-class phono motor DP-80 and DK-300, the arm is a FR-64 set that still boasts high popularity. It is a perfect combination of a thick, stable phono motor and an arm with high resolution and sensitivity. You can enjoy analog playback with plenty of room regardless of genre. There is a wound and dullness on the arm (Oikawa Tetsuji)
Maintenance information: 2026.7.15 Manufacturer maintained (infrastructure inspection. AC cord replacement Head amplifier, for neon tube lighting, capacitor replacement. 33/45 rpm lead SW cleaning, head gap adjustment, operation test)
Accessories: copy of instruction manual
Main specifications: DP-80: quartz lock direct drive, outer rotor, 3-phase AC servo motor, double structure, aluminum die-cast turntable, compatible with 33/45 rotations, approx. 10 kg, DK300: W550 x H190 x D470 mm, 23 kg, FR-64: dynamic balance type, total length 32 mm, execution length 245 mm, needle pressure range 0 to 5 g, 0.5 g step compatible cartridge, 11 to 32 g, arm height adjustment 27 ~ 60mm cartridge weight 0 to 14.5 g (when using a dedicated shell)
The tweeter on one side has been replaced and maintained by Denon Marantz Service. Current model of the 700 series. The clear, high-resolution characteristics unique to the company are also suitable for low volume playback. The decorative plate is peeling on the lower part of the front on one side, and there are touch repair marks (Oikawa Tetsuji)
Maintenance information: 2026.8.8 manufacturer maintained (replaced due to a tweeter problem, 4 bi-wire link plates installed, sound output tests, and other inspections were performed)
Accessories: original box, jumper plate
Main specifications: 8Ω 84dB W165 × H300 × D284 mm 6.2 kg
This is the last record player to inherit the technology that has been cultivated over time in Denon's new-generation record players. Equipped with a highly rigid arm that is compatible with heavyweight cartridges (17 to 32.5 g including shell), it is also recommended for those who want to try out various cartridges. There is dullness over time, color fading, etc. (Oikawa Tetsuji)
Maintenance information: 2026.8.8 operation confirmed
Accessories: instruction manual
Key Specifications: Direct Drive Quartz Lock W504 x H186 x D407 mm 13 kg
Good stylus and cantilever! A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range and resolution have been improved, making it compatible with modern sources with plenty of room. Serial 3020 (Fujisawa Yukishi)
Maintenance information: 2026.8.8 operation confirmed
Accessories: needle cover
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
※The stylus is good, and the cantilever is slightly to the right. DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. Serial 4800 (Fujisawa Yukishi)
Maintenance information: 2026.8.8 operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Comes with original box! The dual-coated anodized aluminum alloy body and 99.9999% pure 6N lead wire are used to bring out the full potential of the cartridge. The overhang can be fine-tuned by loosening the screw on the shaft side. The paint has peeled off on the finger hook, and the lead wire has been replaced with an Ortofon one. (FUJISAWA KOSHI)
Maintenance information: 2026.8.8 continuity confirmed
Accessories: original box
Main specifications: dead weight 13g
The price has been drastically reduced. 2026/5/11 sales price 25,000 yen. Denon tempered glass inlaid 3-tier rack The height of the shelf can be changed in 4 levels. A 50mm thick high-density particle board is used on the outside, and a 30mm thick high-density particle board with tempered glass inlaid on the shelves. The top plate is decorated with glass, so it has a sense of luxury. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Loading limit weight: top plate/bottom plate 100 kg shelf board 50 kg W650 x H540 x D520 mm 50 kg
The price has been reduced. 2026/8/5 sales price 108,000 yen The motor was maintained by the manufacturer and a new arm cable was created. Set of DP-75 equipped with SME 3009S2imp and original cabinet DK-200 You can enjoy clear sound quality with a double layer platter and a powerful servo motor. The arm base appears to be self-made. There are small scratches, dullness, etc. on the exterior (Murakoshi Yoichi)
Maintenance information: 2026.8.4 arm maintained (PU cord creation, arm side connector terminal retightening, arm cleaning, shell terminal contact cleaning, cartridge mounting signal check) 2026.7.30 manufacturer maintained (transistor replacement in motor drive circuit. Speed VR and electrolytic capacitor replacement within the motor control board. Electrolytic capacitor replacement in the power supply circuit. speed adjustment. (Other inspection of each part, operation test)
Accessories: instruction manual (copy)
Main specifications: 3009 Series2 Improved: static balance type needle pressure 0 to 1.5 g cartridge dead weight 4 to 9 g DP-75: quartz lock 33/45 rotation W520 x H200 x D440 mm approx. 19.0 kg
Manufactured in 2025 Complete with accessories! Denon's current CD player. It is equipped with AL32 Processing Plus, which upsamples 44.1 kHz/16 bit data to 705.6 kHz/32 bit during CD playback and performs bit expansion processing. It comes with a front USB input that supports DSD high-resolution file playback. As for the exterior, there are scuff marks on the corners. Serial DBTG012505211 (Tamura Eiji)
Maintenance information: 2026.8.6 operation confirmed
Accessories: remote control, instruction manual, connection cable, power cable
Main specifications: output RCA, digital coaxial, 1 optical system each W434 x H107 x D328 mm 4.9 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The exterior is generally good (Murakoshi Yoichi)
Maintenance information: 2026.8.1 sound output confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Made in 2024! An entry prime amplifier that inherits the high sound quality technology of the NE series. Equipped with a Bluetooth function, it is possible to play content from smartphones, etc. In addition to 4 analog inputs and a Phono input compatible with mm cartridges, it is equipped with 1 coaxial digital input and 2 optical digital inputs. Small scratches and a slight feeling of use can be seen. Serial BLC272410214 (Fujisawa Yukishi)
Maintenance information: 2026.7.27 Operation confirmed
Accessories: remote control, instruction manual, original box
Main specifications: rated output 45W/8Ω/70W/4Ω compatible impedance 4Ω to 16Ω playback frequency band 5Hz to 100kHz W434 × H122 × D307 mm 7.4 kg
Disposal price reduction. Member prices are not applicable. 2026/3/11 sales price 8,000 yen Self-made cabinet for DENON DP-6000. The hole diameter of the tone arm is approximately 20mm. All 4 legs are missing, and the dust cover is closed and cannot be closed. There are chipped corners, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W600 x H160 x D460 mm 7.7 kg (actual measurement)
Comes with original box! DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2026.8.5 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
※Overall, it is inexpensive because it is in poor condition such as scratches and dirt. Although it is small, it is an attractive car with a low range and medium to high range with a solid core in the middle. Bi-wire compatible. It is compatible with a wide range of genres, and is recommended not only for pure audio, but also for surround sound. The exterior has dirt, line scratches, and creases. Also, there are tape marks and scratch marks on the bottom. (TAMURA Eiji)
Maintenance information: 2026.8.5 sweep check OK
Accessories: saran net
Main specifications: Bi-wiring compatible anti-magnetic design impedance 6 ohms playback frequency band 33 Hz to 45 kHz output sound pressure level 88 dB dimensions W194 x H326 x D318 mm weight 8.4 kg
Speaker for system component D-XW33. How about using it as a sub speaker, for checking, etc. The exterior is slightly scratched, the edge is chipped, the saran net is slightly torn, and there is a feeling of use such as dirt (Yoichi Murakoshi)
Maintenance information: 2026.7.10 sound output confirmed
Accessories: saran net
Main specifications: 2 way W150 × H249 × D247 mm 2.9 kg
4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of genre, and has a comfortable, rich, and lively mid-low range. The high sense of stability unique to the 2000 series shines through. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.8.2 operation confirmed
Accessories: instruction manual, power cable
Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
※Currently, it is spinning steadily. Since it is cheap, it will be sold as it is. The model responsible for Denon's volume zone. Rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office machine. It has a reputation for its highly accurate rotation and smooth sound quality. There is oxidation and dirt on the exterior. Serial 1755 (Tamura Eiji)
Maintenance information: 2026.8.2 operation confirmed (33/45 rotation OK)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The price has been reduced. 2026/4/28 sales price 12,000 yen A short-pitch plastic shell that was standard equipment on the DA-302 and DA-303 DL-103 dedicated arms for commercial players. Arriving separately is rare, so be sure to take this opportunity. (FUJISAWA KOSHI)
Maintenance information: 2026.4.28 continuity confirmed
Accessories: No accessories
Main specifications: Approximately 5.5 g dead weight
An MC transformer that uses a transformer designed for the company's standard cartridges DL-103 and DL-103S. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type). (TAMURA Eiji)
Maintenance information: 2026.7.29 Operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz W51 × H53 × D181 mm 0.65 kg
*Currently sold. This model is equipped with a phono and combines the strength of 100W x 2, which is not commensurate with design and size. It is a functional car that starts up well and can be used widely. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.7.20 Operation confirmed
Accessories: none
Main specifications: PHONO (MM) 100W x 100W (4Ω) frequency characteristics 5Hz to 100kHz W250 x H90 x D371 mm 6.1 kg
The price has been reduced. 2026/6/3 sales price 99,800 yen Maintained! It is a system that combines DENON's representative phono motor DP-80 and the company's standard arm DA-309 into a self-made cabinet. You can enjoy analog sound from the good old days with a sense of stability. The Ortofon 6NX-TSW1010 phono cable is included. The exterior has dullness and scratches. (YONEJIMA Satoshi)
Maintenance Information: 2026.6.3 Maintained (power supply, head amplifier, condenser replacement for neon tube lighting. 33, 45 rpm leaf SW cleaning. Head clearance adjustment. speed adjustment. (Inspection of each board, operation test)
Accessories: No accessories
Main specifications: “DP-80”: 3-phase AC servo motor 33 1/3, 45 rpm “DA-309” static balance dynamic damping type total length 340 mm effective length 244 mm overhang 14 mm needle pressure range 0 to 2.5 g compatible cartridge weight 5 to 15 g W477D405 x H170 mm total weight 15.8 kg (actual measurement)
This product has completed maintenance such as mechanical replacement at the manufacturer! ※6 month warranty. Denon's dedicated CD player. Uses traditional AL32 processing. High-quality parts that far surpass the previous series 755 series, such as the company's exclusive custom capacitors incorporating SX1 technology, are used. A sound full of life has been achieved. Serial BLH2720090342 (Takahashi Nobuyuki)
Maintenance information: Maintained on 2026.7.22 (CD mechanism and FFC cable replacement parts inspection operation tests carried out)
Accessories: remote control
Main specifications: analog output RCA1 system, digital optical 1 system W434 x H107 x D275 mm 4.3 kg
The price has been drastically reduced. 2026/7/11 sales price 158,000 yen Maintenance completed, including replacement of 65 deteriorated capacitors, solder correction in each circuit, etc. A popular DENON control amplifier for its excellent phono equalizer. MC head amplifiers are famous for their quality, and they fully draw out the amount of information in the cartridge. It's a neat sound typical of a domestic amplifier with clear yet solid mid-range sound. In addition to the exterior and lettering disappearing, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2026.7.11 Maintained (power lamp replaced. Front lid tightening adjustment, phono circuit, etc., soldering correction, replacement of 65 deteriorated capacitors, volume disassembly contact cleaning, balance volume cleaning, contact grease application after disassembly and contact polishing of each selector switch, panel, knob, housing, terminal cleaning, etc., various part adjustments, aging tests)
Accessories: copy of instruction manual
Main specifications: CR equalizer with 3 PHONO inputs MC head amplifier W455 x H132 x D357 mm 10.5 kg
※Since the board is glued to the back, it is inexpensive. DL-103 series 3rd generation model. The frequency band is 65 kHz, and clear high frequency playback is possible. It has a delicate and natural high frequency like Denon. There is dullness on the body and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2026.7.13 sound output confirmed
Accessories: needle cover
Main specifications: MC type stereo cartridge output voltage 0.25 mV electrical impedance 33 ohms needle tip special elliptical needle 0.1 mm solid diamond needle pressure 1.5 g playback frequency range 20 to 65,000 Hz compatible load resistance 100 Ω or more dead weight 7.5 g
Magnesium alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.7.14 continuity confirmed
Accessories: none
Main specifications: dead weight 6g
Magnesium alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2026.7.14 continuity confirmed
Accessories: none
Main specifications: dead weight 6g