It is a stand dedicated to TANNOY/3LZ of birch wood. It has a walnut painted stingy look, and matching with 3LZ is perfect. There are scratches and scratches in some places (Yosuke Kojima)
Accessories: none
Main specifications: W400 × H430 × D270mm approx. 1.9 kg/book
Stand for back Kogei medium-sized systems. Compatible with small floor speakers such as JBL4312 series, Yamaha NS-1000, TANNOY Stirling etc. The stand plays the role of a baffle plate so that it is integrated with the speaker and it plays a leisurely sound. The scale feels like the louder louder louder speaker. The appearance has large lines and bruises and there are no two rubbers. (Kimiya Miura)
Accessories: No accessories
Main Specifications: W480 × H458 × D350mm 11.4kg
The price has been reduced! 2022/6/1 sales price 59,800 yen Back stand for Kogeisha's medium-sized system. Compatible with small floor speakers such as JBL4312, Yamaha NS-1000, and TANNOY Stirling. The stand acts like a baffle plate, so it integrates with the speaker and makes a leisurely sound. It gives a sense of scale as if the speaker is one size larger. There are dirt and threads on the exterior. (Kimiya Miura)
Accessories: No accessories
Main specifications: W480 × H458 × D350mm 11.4 kg
The price was reduced. 2021/8/3 Selling price 19,800 yen Bass reflex enclosure for 25cm unit of unknown manufacturer. 18mm plywood veneer finish It looks compatible with British units such as TANNOY and GOODMANS. There is a feeling of use such as bruises and peeling off the plate. (Mizushima Itsuro)
Accessories: none
Main specifications: Unit opening diameter 225mm W485 × H670 × D315mm 15.8kg
It is a stand for Tannoy Stirling from H.T.Navi in Nagano. Of course you can use it for other speakers too. There is a granite in the middle. The appearance has dullness and small scratches. (Tamura Eiji)
Main specifications: W500 × H300 × D330mm Weight 9.4kg
A self-made audio board surrounded by a wood frame on the outside of white granite. TANNOY STIRLING/HE and later models are the right size. The bottom is also reinforced with veneer (Yoichi Murakoshi)
Accessories: none
Main specifications: W400 × H25 × D400mm
This is a self-made wooden speaker stand for STIRLING by TANNOY. 4-legged style made of pine wood. You can aim for mild sound quality that matches the soft acoustical characteristics of sterling. There are small scratches and some adhesive peeling on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W485 x H330 x D300 mm weight 6.2 kg
A self-made audio board with a white granite exterior surrounded by a wooden frame. Perfect size for TANNOY STIRLING/HE and later models. The bottom is also reinforced with veneers (Fujisawa Yukishi)
Main specifications: W400 x H25 x D400 mm, weight 7.2 kg (actual measurement)
The price has been drastically reduced. 2023/1/26 sales price 450,000 yen maintenance completed! This is a rare ZAIKA AUDIO 300B split push power amplifier. It achieves both the fresh sound unique to the 300B and its strength. It has the ability to play large TANNOY speakers loudly. There are 2 input terminals, but they are the same. There are some dullness and thin scratches on the exterior as a whole, but there are no major scratches that are particularly conspicuous (Kanai Hidetsugu)
Maintenance information: 2023.1.25 maintenance (resistor 1/2W noise and deterioration replacement, 2 x 2, circuit analysis and circuit re-solder multiple treatment, vacuum tube socket and RCA jack cab repair, BIAS and HUM BAL. readjustment. Single CH electrolytic capacitor 47 μF noise exchange. Operation checked at AC 100V (measured with rated output 61 W SP: 16 ohms)
*BIAS and ham balance etc. have been adjusted. Please do not change the order of the vacuum tubes as much as possible.)
Accessories: knob manual
Main specifications: rated output 61 W (actual measurement) Vacuum tubes used in mono: 300B x 4, 6SN7, ECC81 size W400 x H200 x D230 mm 15.3 kg (actual measurement)
Speaker cable 3.8 m pair end Y lag/banana parallel multiple kneaded wire structure using 1 pair of SCMC-OFC+LSC 296 kneading threads. A popular cable that is a staple in combination with European speakers such as Tannoy. The exterior is dull (Satoshi Yonejima)
Maintenance Information: 2023.4.23 Confirmation Confirmed
Accessories: no accessories
Speaker cable 6.0m It is a cable from a Dutch manufacturer, such as being used for the internal wiring of a tannoy with only one terminal untreated. Rubbing on the sheath, there is dirt. One side is divided by about 40 cm (Kanai Hidetsugu)
Maintenance Information: 2022.7.10 Conduction Confirmed
Accessories: none
Speaker cable 4.6 m pair terminal with a parallel multi-braided wire structure using 1 pair of untreated SCMC-OFC+LSC 296 threads. A popular cable that is a staple in combination with European speakers such as Tannoy. The degree is generally good (Murakoshi Yoichi)
Maintenance Information: 2022.12.9 Confirmation Confirmed
Accessories: none
Maintenance has been completed, including interior and exterior! A speaker system in which Tannoy's 12inch coaxial 2-way unit Monitor Gold12 is mounted on the Utopia rear load horn enclosure Family King. With the creepiness of a high-efficiency 12-inch unit and the sense of scale unique to the rear road horn, the good localization and sense of volume are also excellent. Crack on one side ATT plate, ATT feel slightly different on left and right (Fujisawa Yukishi)
Maintenance information: 2021.4.14 maintained (exterior repair/cleaning, terminal replacement. Network terminal polishing and cleaning, ATT (SW type) contact cleaning, frequency characteristic measurement check (~ approx. 42 kHz) were performed to replace the capacitor for LF where contact failure occurred (VISHAY (made), input/output waveform and balance check, sound output check)
2017.2.3 Unit maintenance completed (woofer part center out, cap re-attached, tweeter part gap rust removal, center out, disconnection repair (due to disconnection verge), check each part, sound out test)
Accessories: None
Main Specifications: [Monitor GOLD12] 12inch Coaxial 2-Way Playback Frequency Band 25Hz to 20kHz Maximum Input 30W Impedance 8Ω [Overall] W600 × H993 × D445mm 48kg