Using silver-plated 5N oxygen-free copper for the 1.0m pair of analoctm plug conductors, you can hear detailed, powerful, and colorful sounds. (TAMURA Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The perfect balance configuration of 1.8 m pairs of ultra-thick OFC conductors on the XLR cable and the OFC braided shield structure improve audio signal dynamics and achieve overwhelming common mode noise reduction. It realizes high purity signal transmission with low resistance. (TAMURA Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
This is the first product composed of 1.0 m of 210 borosilicate glass fibers in an OPT cable. Compared to conventional acrylic fibers, it achieves a much higher bandwidth and an attenuation rate of 1/10, making the sound transparent. (TAMURA Eiji)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: No accessories
Mid-grade model using 1.0 m pair of RCA cables with silver-plated 5N oxygen-free copper. It is a cable that enhances the vibrancy of the music and enhances its vividness. It is suitable for fast-paced music. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Mid-grade model using 1.0 m pair of XLR cables with silver-plated 5N oxygen-free copper. It is a cable that enhances the vibrancy of the music and enhances its vividness. It is suitable for fast-paced music. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
XLR cable 1.5m pair If you are familiar with the Mark Levinson brand and own the same brand as Madrigal's XLR cable, don't miss it! There are stains and threads on the sheath (Tamura Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
RCA cable 1.5m pair CZ is an abbreviation for control impedance. The conductor is silver-plated OFHC filled with a structural damping effect that holds uniform impedance characteristics over the entire length of the cable and a special gel (GEL) that enhances separation between internal core wires. The exterior is dirty, and there are scratches on the sheath and plug. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
1.5 m pair of RCA cables, double shielded construction using plenty of high-grade copper. It has natural sound quality, high resolution, and deep, deep bass. Oxidation can be seen on the plug (Tamura Eiji)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 0.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 0.5m pair terminal of the RCA cable is made by REAN (REAN). This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 Operation confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are made by Neutric. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are manufactured by Neutrik. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.5m pair of XLR cable terminals are manufactured by Neutrik. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
The 1.0 m pair terminals of the RCA cable are made by Rean. This cable has no habit, has an straightforward tone, and is easy to handle with a sturdy structure. (FUJISAWA KOSHI)
Maintenance information: 2024.9.20 continuity confirmed
Accessories: No accessories
Power cable 1.2m earth is unwired ONTOMO MOOK's “Stereo Edition Anyone Can Do It! This is an appendix that was attached to the “Make Your Own Audio Accessory” magazine. You can enjoy clear sound with excellent cost performance (Murakoshi Yoichi)
Maintenance information: 2024.9.19 continuity confirmed
Accessories: none
Speaker cable, 2.0m pair, EQS5, single wire specification, spade terminal on both ends, Ritz coating, OFC conductor, 2-core, perfectly symmetrical coaxial structure, standard model of the company's speaker cable. The clear spatial expression typical of Wire World is attractive. There is discoloration on the plug and sheath (Kojima Yosuke)
Accessories: none
Speaker cable, 2.0m pair, EQS3++, single wire specification, spade terminals on both ends, Glen optimized silver conductor+polymer coating, 2 cores, perfectly symmetrical, coaxial structure, and features a three-dimensional, high-contrast expression. The plug changes color, rubs against the bifurcated tube part, and there is dirt (Kojima Yosuke)
Accessories: none
Balance cable, 1.0 m pair, 7N, type 4, 8 core, triple shield design, a highly finished cable with a well-balanced impression and a sense of energy and delicacy. There are color marks on the plug shell, discoloration and rust spots on the root part, and frayed on the sheath (Kojima Yosuke)
Accessories: none
Balance cable, 1.5 m pair, 7 nCu conductor, reproduces a sound field that stretches smoothly into space, has a sharp sound image with tight bass, and excellent transparency. There are abrasions and discoloration around the plug (Kojima Yosuke)
Accessories: none
Balance cable An XLR cable with a Neutrik balance plug attached to a 0.13m unknown pair cable. Each pin is connected by 3 thin lines. Details unknown (Murakoshi Yoichi)
Maintenance information: 2024.9.18 continuity confirmed
Accessories: none
Speaker cable 2.0m pair end unprocessed 4-core structure Caldas entry model. The resolution is also extremely high, and it is characteristic that it is smooth and has a high sense of transparency. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.15 continuity confirmed
Accessories: none
Balance cable 1.0m pair is the successor to the long-selling model Quadlink-5C. While inheriting the basic elements that can be called Caldas traditions, such as straight conductor Ritz, golden ratio, and constant Q, upgrades have been achieved in everything, such as the amount of information and size of the stage. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.15 continuity confirmed
Accessories: none
The successor to the RCA cable 1.0m pair long-selling model Quadlink-5C. While inheriting the basic elements that can be called Caldas traditions, such as straight conductor Ritz, golden ratio, and constant Q, upgrades have been achieved in everything, such as the amount of information and size of the stage. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.15 continuity confirmed
Accessories: none
Digital cable with 1.2 m RCA terminal, foam insulator, 75 ohm design. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.15 continuity confirmed
Accessories: none
RCA cable 0.7 m pair REAN (Neutrik) RCA plug. It is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness, especially in the mid to low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.16 continuity confirmed
Accessories: none
RCA cable 2.0m pair REAN (Neutrik) plug is an 8412 modern version with all Teflon insulation. It is a cable that is more instantaneous than its price, and is suitable for JAZZ and ROCK systems. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.16 continuity confirmed
Accessories: none
RCA cable 2.0m pair black sheath REAN (Neutrik) RCA plug is a standard BELDEN line cable that has a firm thickness, especially in the mid to low range, while clearly outlining the sound. You can see the appearance, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.16 continuity confirmed
Accessories: none
RCA cable 0.7 m pair is a standard BELDEN line cable that has a firm thickness in the mid to low range while clearly outlining the outline of the REAN (Neutrik) plug sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.16 continuity confirmed
Accessories: none
Speaker Cable, 3.0 m Pair Terminals, Untreated OFC Conductor, Golden Strada #79のテクノロジーを正当継承しリーズナブルなプライスを実現したハイコストバフォーマンスケーブルです。 There is a feeling of use on the exterior such as small scratches (Kobayashi Hitoshi)
Maintenance information: 2024.9.12 continuity confirmed
Accessories: none
You can see the exterior, dullness, and feeling of use of the 1.4 m pair of RCA cables (Kobayashi Hitoshi)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
※Only 1 speaker cable has an untreated 1.5m end, LC-OFC conductor. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
An interconnect cable finished by attaching terminals to a 2.0m pair RG type high frequency coaxial cable from RCA cable Belden. The sharpness and extrusive sound are attractive. Characteristic impedance 53.5 ohms. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
The 1.3 m pair of XLR-RCA cables are originally microphone cables, so sound loss is good. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.16 Continuity confirmed
Accessories: none
You can see the exterior, dullness, and feeling of use of the 1.0 m pair of RCA cables (Kobayashi Hitoshi)
Maintenance information: 2024.9.9 continuity confirmed
Accessories: none
The 1.5m pair of RCA cables are originally microphone cables, so sound loss is good. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.12 continuity confirmed
Accessories: none
I have the impression that the RCA cable is a natural 2.0m pair regardless of genre. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.12 continuity confirmed
Accessories: none