A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is dull, and there is a feeling of use and oxidation. Serial 127176, 128196 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: No accessories
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
*Currently sold. Taket's super tweeter with a playback capacity of 150 kHz or more. The slide switch for switching the crossover was removed from the original BATPRO, fixed to the A position, and the terminals were changed. The efficiency can be switched between 5 levels with the rotary switch, creating natural overtones. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: No accessories
Main specifications: maximum rated 35 V impedance 8 ohms playback frequency band 18 kHz to 150 kHz W125 x H90 x D100 mm approx. 260 g
※There is no problem with the operation, but the AC adapter sticking is sweet. A D/A converter with a unique design. The design concept, which places emphasis on musicality over physical characteristics, is an attractive sound not found in Japan. Please enjoy the warm, thick sound quality. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: AC adapter
Main specifications: HDCD compatible, output RCA x 2, digital input optical x 1, coaxial x 1, W107 x H107 x D205 mm, 1.3 kg
Maintained! It uses a CDM-1 swing arm mechanism and is representative of analog sound CD players. The high level of expressiveness that can bring out nuance, such as singing gently and playing strongly, is still popular today. Combinations such as tube amplifiers are standard. As for the exterior, the area near the VOL knob on the left side of the front is flat. Serial 5363 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Maintained (CD mechanical pickup repair. Lens dirt, turntable motor height correction. D/A converter IC replacement. (Exchange and check coupling C in other substrates)
Accessories: power cord
Main specifications: Philips CDM-1 swing arm mechanism with 100dB signal-to-noise ratio, attached functions/program memory, TNO/INDEX search auto pause display function/track & index number song progress/time remaining before elapsed W446 x H109 x D332 mm 9 kg
Maintained! Genuine Electri Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. On the exterior, there are parts where oxidation, partial peeling, and light is leaking out. Serial JEB8913 (Fujisawa Yukishi)
Maintenance information: 2024.6.15 Maintained (MODE switch disassembly contact polishing contact grease application, installation fixed. Push switch disassembly contact cleaning contact grease application. Other volume contact cleaning. Electrolytic capacitor replacement, panel lamp replacement, panel peeling correction. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
RCA line cable 2.0m pair model using plasma (metal compound powder) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable is a model using a 1.5m pair plasma (powder of metallic compounds) shielded. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 305572 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10002357, 10002357 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10007170 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
RCA cable 0.75m pair REAN plug Neumann RCA cable familiar from the prestigious German family. Recommended for those who listen to classical music on records. Since it is slender and soft, it is useful in a variety of situations. There is dullness on the plug. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
A stereo power amplifier with a traditional dual mono configuration. The overwhelming driving power and precise sound are attractive. The JBL4343 series is a classic combination, and the TANNOY Westminster makes you listen with plenty of volume by ringing the box. There are scratches and corner marks on the exterior. Serial 2016 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 operation confirmed
Accessories: power cord, remo pin, balance short pin
Main specifications: stereo power amplifier, dual mono configuration, 200W+200W (8Ω), 800W (8Ω, when connected to a bridge), input impedance 50kΩ, W483 x H210 x D450mm, 40 kg
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 100003931 (Fujisawa Yukishi)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Digital cable 1.0 m (RCA-BNC terminal) revision B type. A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. On the exterior, oxidation and darkening of the terminals can be seen. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
The balance cable is a 1.0m pair XLR female (2nd hot) to XLR male (3rd hot). The silver-plated OFC conductor is bright and clear, and you can enjoy the transparency of a PAD. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
As an ideal interface between mid-class audio components for a 1.0 m pair of RCA cables, it fully demonstrates its performance for any device and provides the enjoyment of music along with warm temperatures. ※It is a bargain because it drains liquid. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
1.0 m digital cable, BNC terminal revision B type on both ends A hybrid type of 6N silver and silver alloy. An honor student with an overwhelmingly large amount of information and excellent cost performance. The transparency is attractive. (FUJISAWA KOSHI)
Maintenance information: 2024.6.14 continuity confirmed
Accessories: none
Equipped with an impedance changeover switch (LOW: 5 to 50 KΩ, MID: 40 to 100 KΩ, HIGH: 90 KΩ or more) that optimizes characteristics according to the input impedance of devices connected to a 1.0 m pair of RCA cables, a Valerie structure with all phase characteristics, and a high C/P model that employs many MIT patented technologies such as CVT couplers. (FUJISAWA KOSHI)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: original box
J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI)
Main specifications: diameter 35 mm x height 15 mm
J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI)
Accessories: none
Main specifications: diameter 35 mm x height 15 mm
Set of 4 Kyocera ceramic insulators The top is made of metal and the bottom is made of cork material. It is clear and you can expect the unique sound of ceramics. The exterior has scratches and stains from use over time. (FUJISAWA KOSHI)
Accessories: none
Main specifications: diameter 30mm height approx. 15mm weight approx. 25g/piece
Set of 2 carries a stable potential and a clean signal by covering it with an item plug that plays a role in preventing noise from being mixed in or signal loss. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: length 70mm inner diameter 43mm
※The height is 35 mm. The popular ICP composite spike has arrived. It is a composite material made of hard material and soft material. Combining a stainless steel chip with a modern body is effective in preventing vibrations. (FUJISAWA KOSHI)
Accessories: none
Main specifications: hybrid cone spike diameter 35mm x H35mm
PSE certified product. This product combines Eau Rouge's CFRP technology with a lightweight, highly textured acrylic box. Although it is the company's entry model, it is a product with a firm focus on sound quality. There are a few small scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: W300×H80×D65mm
Krypton high carbon steel insulator set of 4 It is a product that greatly improves acoustical and physical properties such as sound propagation speed with a special hard coating. The bottom surface uses silicone rubber material that dampens the natural vibrations of the metal and has an anti-slip effect with the floor, and has an adhesive effect on the floor. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: flat type, diameter 40 x height 10 mm, 95 g per piece
4 pieces per pair Asada cherry cube base Improve sound quality by placing it under speakers, amplifiers, etc. ※The blister is out of stock. (FUJISAWA KOSHI)
Accessories: none
Main specifications: Asada cherry blossoms, load capacity 50 kg/4 pieces, W34 x H34 x D34 mm, measured 48 g/piece
4 pieces per pair Asada cherry cube base Improve sound quality by placing it under speakers, amplifiers, etc. (FUJISAWA KOSHI)
Accessories: case
Main specifications: Asada cherry blossoms, load capacity 50 kg/4 pieces, W34 x H34 x D34 mm, measured 48 g/piece
Set of 4 It simultaneously reduces vibration and impact noise, improves overall resolution, and is particularly excellent at improving low frequency resolution, and has the effect of tightening soft low frequencies. There are threads and dirt. (FUJISAWA KOSHI)
Accessories: none
Main specifications: recommended load mass 10 to 80 kg (4 point fulcrum) usage environment 0 to 40 ℃ size 55 mm x 55 mm
Set of 4 It simultaneously reduces vibration and impact noise, improves overall resolution, and is particularly excellent at improving low frequency resolution, and has the effect of tightening soft low frequencies. There are threads and dirt. (FUJISAWA KOSHI)
Accessories: none
Main specifications: recommended load mass 10 to 80 kg (4 point fulcrum) usage environment 0 to 40 ℃ size 55 mm x 55 mm
Set of 4 cone spike insulators short type insulators that suppress vibration and resonance in various devices. The tip is formed in a circle, and since it is an ICP material made of soft and hard material, it is hard to scratch furniture. (FUJISAWA KOSHI)
Accessories: none
Main specifications: ICP composite short type φ35mm×H18mm
Set of 4 Strong vibration countermeasures are taken due to the vibration control characteristics of the hybrid type material itself and the coupling effect of the stainless steel chip, and distortion is suppressed more effectively. (FUJISAWA KOSHI)
Accessories: none
Main specifications: hybrid cone spike diameter 35 mm x H30 mm
Set of 4 An ideal acoustic damping material (sorbosane) is used. It helps improve the sound quality of players, amplifiers, etc. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: load capacity 80 kg; size: diameter: 50/5 mm thick
This is a rare insulator made by Sony. It is a well-made insulator using air, rubber, and oil. There is a feeling of use, such as marks of the device being placed on it. (FUJISAWA KOSHI)
Accessories: none
Main specifications: maximum load 30kg/weight 89g/piece per 4 pieces
Set of 4 Strong vibration countermeasures are taken due to the vibration control characteristics of the hybrid type material itself and the coupling effect of the stainless steel chip, and distortion is suppressed more effectively. (FUJISAWA KOSHI)
Accessories: none
Main specifications: hybrid cone spike diameter 35 mm x H30 mm
J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI)
Main specifications: diameter 35 mm x height 15 mm
*Lead wire missing. An NR (Non Resonance) head shell with the shell body and plug part integrally molded. It has a structure where the main body is tightened from the top and bottom with a finger plate and cartridge, there is no need for a stop nut, and it comes with an overhang adjustment memory, making it easy to set up. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 10 g (actual measurement)
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
This is a classic jewel tone (made in Nagoya) shell. There is slight dullness and mounting scratches on the body, but overall it is in good condition. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: machined aluminum block with a dead weight of 12g
※The head pad is loose, so it's cheap. The earpads are in good condition. The Edition series flagship model is now in stock for the first time at Hi-Fi. It has a good balance from high to low frequencies, and it seems that it can be used regardless of genre. The ear pads are also soft to the touch and can be worn without stress. A slightly soapy scent remains on the body. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: special case, mini jack conversion plug
Main specifications: sealed dynamic headphone impedance 30 ohms playback frequency band 8 to 35,000 Hz sound pressure level 96 dB
Balance cable 1.0 m pair XLR cable using a huge network that is synonymous with MIT. The fact that the transparency is clearly increased is a word. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Enacom series cable terminator. It has the effect of eliminating ringing distortion in speaker cables. The signal-to-noise ratio is increased, and quiet sound quality can be obtained. (FUJISAWA KOSHI)
Accessories: No accessories
※Although maintenance has been completed, the lower half of the display remains off due to the lack of display repair, so it is inexpensive. This is the REVOX B225 designed by STUDER as a consumer model. The large, sturdy slide tray not only provides a sense of stability, but also reduces vibrations to improve sound quality. The thick, rich sound quality works particularly well with older sources. The thick, energetic analog-like sound is priceless. The exterior has dullness and scratches. LCD is the current state. Serial 11621 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (tray slide shaft poor operation cleaning. Each board on the other parts has been checked, capacitors, etc. have been replaced. LCD cannot be replaced)
Accessories: power cord
Main specifications: Philips CDM1 swing arm mechanical multi-bit DAC W450 x H109 x D33 mm 8.5 kg
Maintained! 117V specification. A masterpiece model from the golden age of Macintosh. With an output of 50W, the modest yet rich, and flavourful sound is attractive. You can enjoy the rich and realistic sound in combination with a pri of the same age. The exterior is dull and has small scratches. Serial AT2722 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (each indicator lamp replaced. Electrolytic capacitor replacement. Input volume and switch cleaning. Bias and offset checks. Output audio check)
Accessories: copy of instruction manual
Main specifications: 117V specification output 50W+50W load impedance 4, 8, 16 ohm input sensitivity 0.5V full stage direct connection pure complementary output transformer W406 x H138 x D330 mm 22.7 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/6/8 sales price 298,000 yen Maintained! A player equipped with a genuine SME 3010R black model for the 100th anniversary Centennial. This is a famous machine that perfectly matches the high sense of resolution unique to SMEs and the individuality of the supple TD126. The quietness of the floating suspension and belt drive and the analog sound with a low center of gravity are excellent words. The relatively compact housing, ease of use, and good balance in terms of sound quality are also attractive. The exterior has dullness and scratches. Serial 66529 (Fujisawa Yukishi)
Maintenance information: 2024.6.8 Maintained (replaced due to poor contact with the display lamp. Servo circuit electrolytic capacitor replacement. Cleaning between armweights and shafts. Clean the arm clamp area. Loosen and re-tighten the upper arm screws. Strobe mirror cleaning. Elevation belt and turntable belt replacement The PU cord ground wire has been repaired. (Arm operation, voice check OK)
Accessories: instruction manual, phono cable
Main specifications: belt drive, 33/45/78 rotation compatible, W505 x H170 x D395 mm, 14 kg, arm part: static balance type, effective length 237 mm, cartridge mounting weight range 9.5 to 34 g (including shell), adjustable needle pressure range 0 to 5 g
This is a micro boost transformer whose details are unknown. I think it's probably a test machine. I watched it on the DL-103, and the extrusion is subdued and has a natural, gentle tone. It has no habit and is easy to use. There are some minor scratches on the exterior. Felt is attached to the bottom. (FUJISAWA KOSHI)
Maintenance information: 2024.6.7 operation confirmed (boost tested with DL-103)
Accessories: none
Main specifications: W130 x H60 x D100 mm 2.1 kg (actual measurement)
The price has been drastically reduced! 2024/6/7 sales price 118,000 yen Woofer edge softening treatment! One of DIATONE's most popular speakers. The sharp high resolution line started with this speaker. It is a speaker representing DIATONE, which is delicate and has high transparency, and by successfully combining amplifiers, it is a very high quality speaker even now. The exterior has chipped veneer, stains, and scratches. Serial 15112, 15119 (Fujisawa Yukishi)
Maintenance Information: 2024.6.7 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed bookshelf type, 6 ohms, playback frequency band, 28 Hz to 40,000 Hz, output sound pressure level, 90 dB, crossover frequency, 500 Hz/4.5 kHz, rated input 60 W, maximum input, 180 W, W410 x H710 x D362 mm, 38 kg
The price has been reduced! 2024/6/5 sales price 34,800 yen It is equipped with a 165 mm diameter woofer that uses a Kevlar woven cone that suppresses the generation of split vibrations, and is equipped with an advanced driver unit that supports rich musicality. The cabinet design is optimized using proprietary computer software and the latest spectrum analyzer analysis technology, and the input terminals are equipped with 2 sets of speaker terminals compatible with banana plugs. There is a small scratch on the side of the exterior. Serial WH057521BGH0025, WH057521BGH0025 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, original box, jumper plate, saran net
Main specifications: output sound pressure level 87 dB impedance 8 ohms playback frequency band 45 Hz to 20 kHz W196 x H355 x D290 mm weight 6.5 kg
The price has been drastically reduced! 2024/6/4 sales price 320,000 yen The maintenance has been completed, but since corn paper repair marks remain, it is cheap. A cutting-edge unit installed in the high-end model K2 S9800. The unit alone is also highly evaluated, and it stretches flat to a very high range, and it is a dynamic sound. As for the exterior, there are repair marks and wrinkles on the corn paper. Serial 01522, 010034 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 maintained (center cap replaced, part of the cone paper torn back side repair)
Accessories: No accessories
Main specifications: 15inch pure pulp cone woofer with Alnico 5DG magnet 8Ω 400W playback frequency band 20Hz to 2kHz minimum resonance frequency 26 Hz 94 dB recommended crossover frequency 800 Hz outer diameter 387 mm x depth 235 mm 18 kg