It became a hot topic when it went on sale as a record player made from barrels that were over 100 years old and used for about 50 years to mature whiskey. You can enjoy high quality analog sound with a special high sound quality design. 2000 millennium model limited to 1000 units. There is slight rubbing on the dust cover (Sasaki Shota)
Maintenance information: 2024.3.17 Operation confirmed
Accessories: copy of the manual, EP adapter
Main specifications: Die-cast aluminum (331 mm) turntable with S-shaped static balance type tone arm, 33/45 rotation, W504 x H182 x D420 mm, 13 kg
The slip mat and subweight are missing. Limited edition model of the SL-1200MK5. In addition to the conventional -8% to +8% pitch control, a double adjustment function from -16% to +16% has been added. The pale LED light is fresh. There is a feeling of use such as scuffs on the start button, small cracks on the dust cover hinge, and overall dullness. Serial GE2LA001329 (Mizushima Itsuro)
Maintenance information: 2024.3.15 Operation confirmed
Accessories: copy of instruction manual (SL-1200MK5), dust cover, single adapter
Main specifications: manual quartz direct drive 33/45 rotation universal S-shaped tone arm static balance type needle pressure adjustment range 0 to 4 g W453 x H162 x D353 mm 12.0 kg
The price has been reduced. 2024/3/12 sales price 39,800 yen Maintained by the manufacturer! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
A TEAC record player that uses SAEC's knife-edge tone arm. The shiny and luxurious construction makes you feel the attention to the finish. The fact that it has a built-in phono is also a nice specification. There is a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: instruction manual, AC adapter, EP adapter
Main specifications: belt drive 33.45 rotation static balance type S-shaped tone arm applicable cartridge mass 3.0 g to 12.0 g W420 x H117 x D356 mm weight approx. 5.0 kg
Maintained! 50Hz specification. * Rotation is slightly fast, but this is the current situation due to product limitations (this is a level you can't understand when playing music). A rare vintage turntable that uses a belt drive system. An ultra-low speed 16-pole hysteresis synchronous motor is mounted as the drive motor, and a TP-13 is mounted on the tone arm. In addition to the tasteful design, you can enjoy the supple and mild sound typical of Torrens. There are scratches and line marks on the exterior. Serial 09070 (Fujisawa Yukishi)
Maintenance information: 2024.3.15 Maintained (replaced due to defective belt replacement. The power cord and phono cable have been replaced. The motor has been cleaned and all parts have been lubricated. Arm elevation cylinder cleaning grease has been applied. (Since there is no rotation synchronous motor adjustment, it flows slightly.)
Accessories: instruction manual, genuine headshell
Main specifications: 16-pole hysteresis synchronous motor External dimensions: W394 x H125 x D325 mm Weight approx. 6.7 kg
Our company has been refreshed and maintained, focusing on creating a new dust cover, disassembling and cleaning the arm, improving motor bearing grease, etc.! A record player with high cost performance by inheriting technology obtained with the GT-2000. It conveys all the goodness of analog discs where power and subtlety coexist and you can enjoy rich overtones. There is a slight feeling of use. Serial 02584 (Takasaki Atsushi)
Maintenance information: 2024.3.12 maintenance (dust cover, motor bearing grease up, O-ring replacement. Arm lifter grease up. Arm disassembly cleaning and pivot adjustment. Electrolytic capacitor replacement. Check turntable rotation speed and check arm needle pressure. Check the sound output. (Simple exterior cleaning, comprehensive operation confirmation inspection)
Accessories: copy of instruction manual
Main specifications: Statically balanced S-shaped arm mounted applicable cartridge 3G to 12g direct drive drive quartz PLL servo control DC coreless hole motor turntable 36 cm aluminum die cast W532 x H220 x D388 mm 22 kg
Maintained in May 2020! This is the entry model for the YAMAHA/GT series, which boasts strong popularity. This is an impressive car with a sturdy cabinet and heavyweight turntable. Earthquake resistance is also solid, and the balance between thickness and precise sound is excellent. As for the exterior, there are stains on the turntable. Serial 201284 (Tomoho Asaine)
Maintenance information: 2020.5 maintained (motor bearing, arm lifter, grease up arm disassembly, cleaning, pivot adjustment, electrolytic capacitor replacement arm strut and weight, rust, polishing, rotation speed confirmation, arm needle pressure confirmation, sound output check, simple exterior cleaning, comprehensive operation check inspection)
Accessories: copy of instruction manual
Main specifications: static balance S-shaped arm applicable cartridge dead weight range 3 g to 12 g W532 x H212 x D406 mm 15.4 kg
Maintained! Create a new dust cover. The KP-1100 boasted the best cost performance among record players under 100,000 yen at the time. Uses an X-shaped die-cast frame with an integrated arm and motor in a strong frame. It is an easy-to-use car equipped with an auto lift-up function (Oikawa Tetsuji)
Maintenance information: 2024.3.12 Maintained (motor part removed, shaft and bearing cleaned and lubricated. The tact SW on the operation part, the electrolytic capacitor on the internal board, and the rectifier diode were replaced with new ones. Resolder the board. Remove the area around the arm, disassemble, clean each part, replace the shaft bearing, inspect the internal lead wire, and reassemble. Dust cover hinge reinforcement bracket created. Exterior cleaning, speed check, operation test of each part, sound test, new dust cover creation)
Accessories: instruction manual
Main specifications: high rigidity unified frame direct drive DL motor SNR 90dB aluminum die-cast turntable 1.9 kg needle pressure 0 to 3 g W490 x H182 x D410 mm weight 14.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
Maintained by the manufacturer! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. There are threads and dullness throughout the exterior. Serial 9970 (Hiroki Aso)
Maintenance Information: 2024.2.23 Maintained (head gap adjustment leaf SW cleaning speed adjustment)
Accessories: copy of instruction manual
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
A new dust cover has been created and maintained! A record player with high cost performance by inheriting technology obtained with the GT-2000. It conveys all the goodness of analog discs where power and subtlety coexist and you can enjoy rich overtones. There are scratches and bumps on the exterior. Serial 01638 (Fujisawa Yukishi)
Maintenance information: 2024.2.16 Maintained (new dust cover created. Motor bearing grease up, O-ring replacement. Arm lifter grease up. Arm disassembly cleaning and pivot adjustment. Electrolytic capacitor replacement. Check turntable rotation speed and check arm needle pressure. Check the sound output. (Simple exterior cleaning, comprehensive operation confirmation inspection)
Accessories: instruction manual, EP adapter
Main specifications: Statically balanced S-shaped arm mounted applicable cartridge 3G to 12g direct drive drive quartz PLL servo control DC coreless hole motor turntable 36 cm aluminum die cast W532 x H220 x D388 mm 22 kg
*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. The exterior is dull and has scratches. Serial 8043308382 (Yonejima Satoshi)
Maintenance information: 2024.1.4 operation confirmed
Accessories: No accessories
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H ✕ D370 mm, weight 2.9 kg
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
*Fully auto player with built-in phono equalizer from Denon currently sold. It is recommended for those who want to enjoy records casually without worrying about the location or for beginners. There are scratches on the exterior. Serial 0063373998 (Tamura Eiji)
Maintenance information: 2023.12.8 operation confirmed
Accessories: none
Main Specifications: Fully Auto Player Belt Drive Appropriate Needle Pressure 3.5g W360 ✕ H ✕ D370mm Weight 2.9 kg