Add search
2258 results
Manufacture | Model/Title | Price | Arrival date

MC275 mk5U.S.A

Ask 24-43162-13149-00
MC275 mk5
Manufacture:McIntosh
Original price: JPY 700,000
Price: JPY 407,273
U.S.A 1995 made
Shop: Osu shop
Arrival: 2024-06-16 20:04:17
description
※The power cable is being arranged. I cleaned it, but there is a slight tobacco smell, so it's cheap. A replica model of the famous MC275 released in 2009! It has a wide range and is compatible with recent recording sources. The soft, thick, and natural tone is full of appeal unique to 275. This traditional look is heavy and full of vintage feel. It is also easy to use, such as being equipped with a power switch. On the exterior, some lettering is missing and there are letter misalignment (Sasaki Shota) Maintenance information: 2024.6.16 Operation confirmed Accessories: manual, power cable, original box Main specifications: 75W x 2 (4, 8, 16 ohms) W406 x H178 x D305 mm weight 34 kg

MC275 mk5U.S.A

Ask 24-43162-13150-00
MC275 mk5
Manufacture:McIntosh
Original price: JPY 700,000
Price: JPY 407,273
U.S.A 1995 made
Shop: Osu shop
Arrival: 2024-06-16 20:04:16
description
※The power cable is being arranged. I cleaned it, but there is a slight tobacco smell, so it's cheap. A replica model of the famous MC275 released in 2009! It has a wide range and is compatible with recent recording sources. The soft, thick, and natural tone is full of appeal unique to 275. This traditional look is heavy and full of vintage feel. It is also easy to use, such as being equipped with a power switch. On the exterior, some lettering is missing and there are letter misalignment (Sasaki Shota) Maintenance information: 2024.6.16 Operation confirmed Accessories: manual, power cable, original box Main specifications: 75W x 2 (4, 8, 16 ohms) W406 x H178 x D305 mm weight 34 kg

NU1Japan

Ask 24-43162-13146-00
NU1
Manufacture:KORG
Original price: JPY 425,000
Price: JPY 180,000
Japan
Shop: Osu shop
Arrival: 2024-06-16 20:04:09
description
It is built to meet modern recording requirements, such as a DSD 11.2 MHz USB-DAC, a phono amplifier compatible with MC cartridges, and balanced inputs. It is a playful preamp with warm sound by NuTube, which was jointly developed by KORG and Ise Electronics, and an audio driver equipped with “S.O.N.I.C. Remastering Technology” produced by Mr. Ono Seigen. There are no major noticeable scratches on the exterior (Oikawa Tetsuji) Maintenance information: 2024.6.16 Operation confirmed Accessories: original box, power cable Main specifications: 2CH compatible format (USB) DSD 2.8224 MHz, 5.6448 MHz, 11.2896 MHz, 1 bit DSD3.072 MHz, 6.144 MHz, 12.288 MHz, 1 bit (only when using S.O.N.I.C. remastering technology) PCM44.1 kHz 48 kHz 88.2 kHz 96 kHz 176.4 kHz 192 kHz 352.8 kHz 384 kHz , 16 bit, 24 bit audio driver ASIO2.1, WDM, Core Audio (*no guarantee of operation of Windows other than Intel chips) external dimensions W432 x H93 x D282 mm 5.9 kg

DS-1000CJapan

Ask 24-43135-12833-00
DS-1000C
Manufacture:DIATONE
Original price: JPY 300,000
Price: JPY 116,364(pair)
Japan 1989 made
Shop: Osu shop
Arrival: 2024-06-16 20:03:11
description
Edge softening maintenance completed! Good condition. This is a diamond-tone floor-type tall boy speaker. Edge softening treatment has been applied, and the low frequency, which sounds soft and has plenty of volume, is attractive. Please enjoy the sharp taste of the Boron mid-range and the bass reflex sound full of scale. There are no noticeable scratches (Sasaki Shota) Maintenance Information: 2024.6.16 Edge softened Accessories: none Main specifications: 3 way 4 speakers, bass reflex system, floor type, anti-magnetic type, 6 ohm playback frequency band 32 Hz to 40000 Hz output sound pressure level 90 dB crossover frequency/400 Hz/500 Hz/5000 Hz W320 x H993 x D374 mm 46 kg/book

TA-FA7ESJapan

Ask 24-42700-09193-00
TA-FA7ES
Manufacture:SONY
Original price: JPY 180,000
Price: JPY 90,727
Japan 1995 made
Shop: Osu shop
Arrival: 2024-06-16 20:02:51
description
Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji) Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed. Accessories: copy of the manual Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg

ST-80Denmark

Ask 24-43162-13143-00
ST-80
Manufacture:ortofon
Original price: JPY 88,000
Price: JPY 52,727
Denmark 2009 made
Shop: Osu shop
Arrival: 2024-06-16 20:02:19
description
The definitive edition of the Orthophone MC transformer. Comes with an MC/MM switcher SW, so you can switch easily. The rounded, warm sound quality is attractive. There is a small dent on the front panel (Oikawa Tetsuji) Maintenance information: 2024.6.16 Operation confirmed Accessories: none Main specifications: boost ratio 27dB (3Ω, 47kΩ, 1kHz) input impedance 2Ω to 6Ω load impedance > 47KΩ channel balance <0.5dB frequency characteristics 10 to 100 kHz W153 × H95 × D110 mm 1.36 kg

075U.S.A

Ask 24-43163-13155-00
075
Manufacture:JBL
Original price: JPY 69,400
Price: JPY 63,455(pair)
U.S.A
Shop: Osu shop
Arrival: 2024-06-16 20:01:48
description
※Inexpensive because it has a cigarette smell and dirt. Comes with a self-made stand. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is corroded and dull, and although it has been cleaned, tobacco smell and dirt cannot be removed (Oikawa Tetsuji) Maintenance information: 2024.6.16 Operation confirmed Accessories: self-made stand Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle 

DAC1U.S.A

Ask 24-43078-12311-00
DAC1
Manufacture:Benchmark
Original price: JPY 132,000
Price: JPY 27,091
U.S.A 2010 made
Shop: Osu shop
Arrival: 2024-06-16 20:01:40
description
192 kHz 24 bit D/A converter. The sound image has a clear tone, and it is a high performance model that can also be used as a headphone amplifier. There is a dent on the front panel (Oikawa Tetsuji) Maintenance information: 2024.6.16 Operation confirmed Accessories: power cable only Main specifications: 2 channel 24-bit 192 kHz compatible D/A conversion input 3 systems (coaxial, XLR, optical) W205 ✕ H45 ✕ D240mm 1.6 kg

FI-11-N1(R)Japan

Ask 24-43208-13608-00
FI-11-N1(R)
Manufacture:FURUTECH
Original price: JPY 6,300
Price: JPY 3,455
Japan
Shop: Osu shop
Arrival: 2024-06-16 20:00:22
description
Rhodium plated The PSE standard cable clamp part was changed from conventional resin clamps to special stainless steel, which is heavy and has excellent damping properties. This effective vibration countermeasure maximizes the potential of the device (Oikawa Tetsuji) Accessories: none

KP02Japan

Ask 24-43208-13607-00
KP02
Manufacture:KOJO Technology
Original price: JPY 24,000
Price: JPY 9,091
Japan
Shop: Osu shop
Arrival: 2024-06-16 20:00:19
description
High end outlet plug. The socket blade is a hybrid high-durability plug with palladium 0.3 microns plated on 3 microns of gold. Accessories: nothing Main specifications: cable compatible outer diameter up to 15 mm, wire compatible diameter up to 2.0 SQ 

V15 TYPE3

Ask 24-43162-13151-00
V15 TYPE3
Manufacture:SHURE
Price: JPY 25,273
Shop: Osu shop
Arrival: 2024-06-16 20:00:15
description
*The stylus is made by JICO. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The cantilever is slightly leaning to the left (Sasaki Shota) Maintenance information: 2024.6.16 sound output confirmed Accessories: nothing Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g

TS-10Japan

Ask 24-43163-13158-00
TS-10
Manufacture:TRIO
Original price: JPY 26,000
Price: JPY 9,091
Japan
Shop: Osu shop
Arrival: 2024-06-16 20:00:04
description
It is inexpensive because it leaves a cigarette smell. A turntable seat with high vibration resistance made of porous ceramic. It is a porous ceramic with 45 micron pores in an alumina crystal, and can be expected to have high vibration resistance (Sasaki Shota) Accessories: none Main specifications: 303 mm in diameter, 7 mm in thickness, 1.2 kg in weight

S-2UK

Ask 24-43162-13529-00
S-2
Manufacture:SME
Original price: JPY 4,500
Price: JPY 11,636
UK
Shop: Osu shop
Arrival: 2024-06-16 19:59:58
description
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke) Accessories: none Main specifications: aluminum stamping dead weight 8g

S-2UK

Ask 24-43162-13530-00
S-2
Manufacture:SME
Original price: JPY 4,500
Price: JPY 11,636
UK
Shop: Osu shop
Arrival: 2024-06-16 19:59:55
description
A popular SME classic headshell with a stylish design. Not only is it stylish, but it is also a valuable shell that is light and strong, which is essential for light needle pressure arms and heavy cartridges (Kojima Yosuke) Accessories: none Main specifications: aluminum stamping dead weight 8g

S-2RUK

Ask 24-43162-13528-00
S-2R
Manufacture:SME
Original price: JPY 24,800
Price: JPY 11,636
UK
Shop: Osu shop
Arrival: 2024-06-16 19:59:53
description
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji) Accessories: none Main specifications: aluminum stamping dead weight 8g
2258 results
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out